π-Bonding and the Lone Pair Effect in Multiple Bonds between Heavier Main Group Elements

This review is essentially an update of one entitled “πBonding and The Lone Pair Effect in Multiple Bonds Between Heavier Main Group Elements” which was published more than 10 years ago in this journal.1 The coverage of that survey was focused on the synthesis, structure, and bonding of stable compounds2 of heavier main group elements that correspond to the skeletal drawings reproduced in Tables 1 and 2. A row of numbers is listed at the bottom of each column in these tables. This refers to the number of stable complexes from each class that are currently known. The numbers in parentheses refer to the number of stable species that were known at the time of the previous review. Clearly, many of the compound classes listed have undergone considerable expansion although some remain stubbornly rare. The most significant developments for each class will be discussed in detail under the respective sections. As will be seen, there are also a limited number of multiple bonded heavier main group species that do not fit neatly in the classifications in Tables 1 and 2. However, to keep the review to a manageable length, the limits and exclusions, which parallel those used earlier, are summarized as follows: (i) discussion is mainly confined to compounds where experimental data on stable, isolated species have been obtained, (ii) stable compounds having multiple bonding between heavier main group elements and transition metals are not generally discussed, (iii) compounds in which a multiple bonded heavier main group element is incorporated within a ring are generally not covered, and (iv) hypervalent main group compounds that may incorporate faux multiple bonding are generally excluded. Such compounds are distinguished from those in Tables 1 and 2 in that they apparently require the use of more than four valence bonding orbitals at one or more of the bonded atoms. The remainder of this review is organized in a similar manner to that of the previous one wherein the compounds to be discussed are classified according to those summarized in Tables 1 and 2. The key unifying feature of almost all molecules discussed in this review is that they are generally stabilized by the use of bulky substituents which block associative or various decomposition pathways.3 Since the previous review was published in 1999, several review articles that cover parts of the subject matter have appeared.4

π-Bonding and the Lone Pair Effect in Multiple Bonds Involving Heavier Main Group Elements: Developments in the New Millennium

In recent decades, it has generally been recognized that carbenes play an important role as transient intermediates. As a result of a number of stable carbenes having been isolated and investigated in detail, it is not an exaggeration to say that the chemistry of carbenes has been thoroughly investigated and is now well-understood.1 In addition, much attention has also been paid to the heavier analogues of carbenes, i.e., silylenes (R2Si:), germylenes (R2Ge:), stannylenes (R2Sn:), and plumbylenes (R2Pb:). These so-called metallylenes are monomeric species of the polymetallanes. This is especially true of the silylenes, which are believed to be monomers of polysilane. The metallylenes could be expected to be of great importance in fundamental and applied chemistry as a result of their many differences and similarities to carbenes. The valency of the central atom of the heavier carbene analogues (R2M:, M ) Si, Ge, Sn, Pb) is two. That is, its oxidation state is MII and its stability increases as the principal quantum number (n) increases. In fact, dichloroplumbylene and dichlorostannylene, PbCl2 and SnCl2, respectively, are very stable ionic compounds. However, these dihalides exist as polymers or ion pairs both in solution and in the solid state. The dichlorogermylene complex GeCl2 · (dioxane)3 is also known to be stable and isolable, whereas the dihalosilylenes are barely isolable compounds.2 The early silylene research was concerned largely with comparing the chemistry of the dihalosilylenes with that of carbenes. Hence, the chemistry of the metallylenes has been considered mainly from the molecular chemistry point of view.4 In contrast to the carbon atom, the heavier group 14 atoms have a low ability to form hybrid orbitals. They therefore prefer the (ns)2(np)2 valence electron configurations in their divalent species.5 Since two electrons remain as a singlet pair in the ns orbital, the ground state of H2M: (M ) Si, Ge, Sn, Pb) is a singlet, unlike the case of H2C:, where the ground state is a triplet (Figure 1).1a On the basis of theoretical calculations, the singlet-triplet energy differences ∆EST for H2M, [∆EST ) E(triplet) E(singlet)], are found to be 16.7 (M ) Si), 21.8 (M ) Ge), 24.8 (M ) Sn), and 34.8 (M ) Pb) kcal/mol, respectively. That of H2C: is estimated as -14.0 kcal/mol.6 Furthermore, the relative stabilities of the singlet species of R2M: (M ) C, Si, Ge, Sn, Pb; R ) alkyl or aryl) compared to the corresponding dimer, R2MdMR2, are estimated to increase as the element row descends, C < Si < Ge < Sn < Pb. It follows, therefore, that one can expect that a divalent organolead compound such as plumbylene should be isolable as a stable compound. However, some plumbylenes, without any electronic or steric stabilization effects, are known to be thermally unstable and undergo facile disproportionation reactions, giving rise to elemental lead and the corresponding tetravalent organolead compounds.7 On this basis, it could be concluded that it might be difficult to isolate metallylenes as stable compounds under ambient conditions, since they generally exhibit extremely high reactivity toward other molecules as well as themselves. Metallylenes have a singlet ground state with a vacant p-orbital and a lone pair of valence orbitals. This extremely high reactivity must be due to their vacant p-orbitals, since 6 valence electrons is less than the 8 electrons of the “octet rule”. Their lone pair is expected to be inert due to its high s-character. In order to stabilize metallylenes enough to be isolated, either some thermodynamic and/or kinetic stabilization of the reactive vacant p-orbital is required (Figure 2). A range of “isolable” metallylenes have been synthesized through the thermodynamic stabilization of coordinating Cp* ligands, the inclusion of heteroatoms such as N, O, and P, * To whom correspondence should be addressed. Phone: +81-774-38-3200. Fax: +81-774-38-3209. E-mail: tokitoh@boc.kuicr.kyoto-u.ac.jp. Chem. Rev. 2009, 109, 3479–3511 3479

https://pubs.acs.org/doi/pdf/10.1021/cr900294f

Stable Heavier Carbene Analogues

The synthesis, spectroscopic characterization, and fluorescence quenching efficiency of polymers and copolymers containing tetraphenylsilole or tetraphenylgermole with Si-Si, Ge-Ge, and Si-Ge backbones are reported. Poly(tetraphenyl)germole, 2, was synthesized from the reduction of dichloro(tetraphenyl)germole with 2 equivs of Li. Silole-germole alternating copolymer 3 was synthesized by coupling dilithium salts of tetraphenylsilole dianion with dichloro(tetraphenyl)germole. Other tetraphenylmetallole-silane copolymers, 4-12, were synthesized through the Wurtz-type coupling of the dilithium salts of the tetraphenylmetallole dianion and corresponding dichloro(dialkyl)silanes. The molecular weights (M(w)) of these metallole-silane copolymers are in the range of 4000 approximately 6000. Detection of nitroaromatic molecules, such as nitrobenzene (NB), 2,4-dinitrotoluene (DNT), 2,4,6-trinitrotoluene (TNT), and picric acid (PA), has been explored. A linear Stern-Volmer relationship was observed for the first three analytes, but not for picric acid. Fluorescence spectra of polymetalloles or metallole-silane copolymers obtained in either toluene solutions or thin polymer films displayed no shift in the maximum of the emission wavelength. This suggests that the polymetalloles or metallole-silanes exhibit neither pi-stacking of polymer chains nor excimer formation. Fluorescence lifetimes of polymetalloles and metallole-silanes were measured both in the presence and absence of TNT, and tau(o)/tau is invariant. This requires that photoluminescence quenching occurs by a static mechanism.

Detection of nitroaromatic explosives based on photoluminescent polymers containing metalloles.

Persistent and stable radicals of the heavier main group elements and related species.

Red-orange crystals of cyclotrisilene 3 were obtained by the reaction of the dibromotrisilane 1 and the tribromodisilane 2 with sodium in toluene [Eq. (1)]. The X-ray crystal structure of 3 shows that the three-membered ring is almost an isosceles triangle and has a twisted Si-Si double bond with a length of 2.138(2) A.

Synthesis, Characterization, and Crystal Structure of Cyclotrisilene: A Three-Membered Ring Compound with a Si-Si Double Bond.

An Unexpected Reaction of Silacyclopropene To Form an Organodilithiosilane: Isolation and Characterization of a 1,1-Dilithiosilane Derivative

A stable cyclic dialkylgermylene (1) was synthesized by reductive dechlorination of the corresponding dichlorogermane (6) with sodium. Germylene 1 is monomeric both in solution and in the solid state, as observed by UV-vis spectroscopy and X-ray crystallography.

Synthesis and structure of a stable cyclic dialkylgermylene

A persistent silyl radical, tris(t-butyldimethylsilyl)silyl radical, (t-BuMe2Si)3Si· (1), was produced by two new methods in addition to a conventional hydrogen abstraction from the corresponding hydrosilane: one-electron oxidation of (t-BuMe2Si)3SiNa (2) by NO+BF4− and one-electron reduction of (t-BuMe2Si)3SiBr (3) by sodium.

Persistent Tris (t-butyldimethylsilyl) silyl Radical and Its New Generation Methods

A series of oligo(1,1-silole)s, Me3Si[SiC4Me4]n SiMe3 (3: n=3, 4:n=4, 5:n=5) were synthesized and characterized. X-ray diffraction analysis of tersilole 3 revealed that the pentasilane backbone has almost all-trans conformation. The oligo(1,1-silole)s show distinct UV absorptions due to σ-σ*, σ-π*, and π-π* transitions.

Masaaki Ichinohe

Papers

Synthesis, Characterization, and Crystal Structure of Cyclotrisilene: A Three-Membered Ring Compound with a Si-Si Double Bond.

An Unexpected Reaction of Silacyclopropene To Form an Organodilithiosilane: Isolation and Characterization of a 1,1-Dilithiosilane Derivative

Synthesis and structure of a stable cyclic dialkylgermylene

Persistent Tris (t-butyldimethylsilyl) silyl Radical and Its New Generation Methods

Synthesis and Structure of a Series of Oligo[1,1-(2,3,4,5-tetramethylsilole)]s