Photocatalysis has recently become a common word and various products using photocatalytic functions have been commercialized. Among many candidates for photocatalysts, TiO2 is almost the only material suitable for industrial use at present and also probably in the future. This is because TiO2 has the most efficient photoactivity, the highest stability and the lowest cost. More significantly, it has been used as a white pigment from ancient times, and thus, its safety to humans and the environment is guaranteed by history. There are two types of photochemical reaction proceeding on a TiO2 surface when irradiated with ultraviolet light. One includes the photo-induced redox reactions of adsorbed substances, and the other is the photo-induced hydrophilic conversion of TiO2 itself. The former type has been known since the early part of the 20th century, but the latter was found only at the end of the century. The combination of these two functions has opened up various novel applications of TiO2, particularly in the field of building materials. Here, we review the progress of the scientific research on TiO2 photocatalysis as well as its industrial applications, and describe future prospects of this field mainly based on the present authors' work.

https://www.jsap.or.jp/jsapi/Pdf/Number14/04_JJAP-IRP.pdf

TiO2 Photocatalysis: A Historical Overview and Future Prospects

Recent achievements in the construction of surfaces with special wettabilities, such as superhydrophobicity, superhydrophilicity, superoleophobicity, superoleophilicity, superamphiphilicity, superamphiphobicity, superhydrophobicity/superoleophilicity, and reversible switching between superhydrophobicity and superhydrophilicity, are presented. Particular attention is paid to superhydrophobic surfaces created via various methods and surfaces with reversible superhydrophobicity and superhydrophilicity that are driven by various kinds of external stimuli. The control of the surface micro-/nanostructure and the chemical composition is critical for these special properties. These surfaces with controllable wettability are of great importance for both fundamental research and practical applications.

Design and Creation of Superwetting/Antiwetting Surfaces

Superhydrophobic surfaces are generally made by controlling the surface chemistry and surface roughness of various expensive materials, which are then applied by means of complex time-consuming processes. We describe a simple and inexpensive method for forming a superhydrophobic coating using polypropylene (a simple polymer) and a suitable selection of solvents and temperature to control the surface roughness. The resulting gel-like porous coating has a water contact angle of 160 degrees. The method can be applied to a variety of surfaces as long as the solvent mixture does not dissolve the underlying material.

https://science.sciencemag.org/content/sci/299/5611/1377.full.pdf

Transformation of a simple plastic into a superhydrophobic surface.

We discuss dynamic hydrophobicity from the perspective of the force required to move a water droplet on a surface and argue that the structure of the three-phase contact line is important. We studied the wettability of a series of silicon surfaces that were prepared by photolithography and hydrophobized using silanization reagents. Hydrocarbon, siloxane, and fluorocarbon surfaces were prepared. The surfaces contain posts of different sizes, shapes, and separations. Surfaces containing square posts with X−Y dimensions of 32 μm and less exhibited ultrahydrophobic behavior with high advancing and receding water contact angles. Water droplets moved very easily on these surfaces and rolled off of slightly tilted surfaces. Contact angles were independent of the post height from 20 to 140 μm and independent of surface chemistry. Water droplets were pinned on surfaces containing square posts with larger dimensions. Increasing the distance between posts and changing the shape of the posts from square to staggered ...

Ultrahydrophobic surfaces. Effects of topography length scales on wettability

Research into extreme water-repellent surfaces began many decades ago, although it was only relatively recently that the term superhydrophobicity appeared in literature Here we review the work on the preparation of superhydrophobic surfaces, with focus on the different techniques used and how they have developed over the years, with particular focus on the last two years We discuss the origins of water-repellent surfaces, examining how size and shape of surface features are used to control surface characteristics, in particular how techniques have progressed to form multi-scaled roughness to mimic the lotus leaf effect There are notable differences in the terminology used to describe the varying properties of water-repellent surfaces, so we suggest some key definitions

Progess in superhydrophobic surface development.

Water-repellent surfaces have been prepared by exposing Si substrates with a hydroxylated surface oxide to fluoroalkyl silane (FAS) vapor. Since this chemical vapor surface modification (CVSM) is based on the chemical reaction between organosilane molecules and hydroxyl groups at the oxide surface, prior to CVSM, the substrate surface was completely hydroxylated by irradiating in air with a 172-nm ultraviolet light until the water contact angle of the surface became almost 0°. Under atmospheric pressure, the substrate was then exposed to vapor of an FAS precursor, that is, one of three types of FAS having different perfluoroalkyl chain lengths [CF3(CF2)nCH2CH2Si(OCH3)3, where n = 0, 5, or 7, referred to as FAS-3, FAS-13, and FAS-17, respectively]. The FAS molecules chemically reacted with the hydroxyl groups on the substrate surface and adsorbed onto it, forming a thin layer of less than 2 nm in thickness. The water repellency of the substrate surface increased with an increase in perfluoroalkyl chain len...

Osamu Takai

Papers

Fluoroalkylsilane Monolayers Formed by Chemical Vapor Surface Modification on Hydroxylated Oxide Surfaces

Preparation of ultra water-repellent films by microwave plasma-enhanced CVD

Preparation of silicon oxide films having a water-repellent layer by multiple-step microwave plasma-enhanced chemical vapor deposition

Physical properties of reactive sputtered tin-nitride thin films

Effect of hydrolysis groups in fluoro-alkyl silanes on water repellency of transparent two-layer hard-coatings