ion. The oxidative addition mechanism was originally proposed22i because of the lack of a strong rate dependence on polar factors and on the acidity of the medium. Later, however, the electrophilic substitution mechanism also was proposed. Recently, the oxidative addition mechanism was confirmed by investigations into the decomposition and protonolysis of alkylplatinum complexes, which are the reverse of alkane activation. There are two routes which operate in the decomposition of the dimethylplatinum(IV) complex Cs2Pt(CH3)2Cl4. The first route leads to chloride-induced reductive elimination and produces methyl chloride and methane. The second route leads to the formation of ethane. There is strong kinetic evidence that the ethane is produced by the decomposition of an ethylhydridoplatinum(IV) complex formed from the initial dimethylplatinum(IV) complex. In D2O-DCl, the ethane which is formed contains several D atoms and has practically the same multiple exchange parameter and distribution as does an ethane which has undergone platinum(II)-catalyzed H-D exchange with D2O. Moreover, ethyl chloride is formed competitively with H-D exchange in the presence of platinum(IV). From the principle of microscopic reversibility it follows that the same ethylhydridoplatinum(IV) complex is the intermediate in the reaction of ethane with platinum(II). Important results were obtained by Labinger and Bercaw62c in the investigation of the protonolysis mechanism of several alkylplatinum(II) complexes at low temperatures. These reactions are important because they could model the microscopic reverse of C-H activation by platinum(II) complexes. Alkylhydridoplatinum(IV) complexes were observed as intermediates in certain cases, such as when the complex (tmeda)Pt(CH2Ph)Cl or (tmeda)PtMe2 (tmeda ) N,N,N′,N′-tetramethylenediamine) was treated with HCl in CD2Cl2 or CD3OD, respectively. In some cases H-D exchange took place between the methyl groups on platinum and the, CD3OD prior to methane loss. On the basis of the kinetic results, a common mechanism was proposed to operate in all the reactions: (1) protonation of Pt(II) to generate an alkylhydridoplatinum(IV) intermediate, (2) dissociation of solvent or chloride to generate a cationic, fivecoordinate platinum(IV) species, (3) reductive C-H bond formation, producing a platinum(II) alkane σ-complex, and (4) loss of the alkane either through an associative or dissociative substitution pathway. These results implicate the presence of both alkane σ-complexes and alkylhydridoplatinum(IV) complexes as intermediates in the Pt(II)-induced C-H activation reactions. Thus, the first step in the alkane activation reaction is formation of a σ-complex with the alkane, which then undergoes oxidative addition to produce an alkylhydrido complex. Reversible interconversion of these intermediates, together with reversible deprotonation of the alkylhydridoplatinum(IV) complexes, leads to multiple H-D exchange

Activation of c-h bonds by metal complexes

This critical review presents a comprehensive study of transition-metal carboxylate clusters which may serve as secondary building units (SBUs) towards construction and synthesis of metal–organic frameworks (MOFs). We describe the geometries of 131 SBUs, their connectivity and composition. This contribution presents a comprehensive list of the wide variety of transition-metal carboxylate clusters which may serve as secondary building units (SBUs) in the construction and synthesis of metal–organic frameworks. The SBUs discussed here were obtained from a search of molecules and extended structures archived in the Cambridge Structure Database (CSD, version 5.28, January 2007) which included only crystals containing metal carboxylate linkages (241 references).

/pdf/secondary-building-units-nets-and-bonding-in-the-chemistry-o0m4ttzsgz.pdf

Secondary building units, nets and bonding in the chemistry of metal–organic frameworks

https://anthropology.ucsd.edu/_files/Faculty%20Files/schoeninger-publications/DeNiro-Schoeninger1984.pdf

Nitrogen and carbon isotopic composition of bone collagen from marine and terrestrial animals

Publisher Summary The chapter focuses on a general description of the force fields that are most commonly used at present, and it gives an indication of the directions of current research that may yield better functions in the near future. After a brief survey of current models, mostly generated during the 1990s, the focus of the chapter is on the general directions the field is taking in developing new models. The most commonly used protein force fields incorporate a relatively simple potential energy function: The emphasis is on the use of continuum methods to model the electrostatic effects of hydration and the introduction of polarizability to model the electronic response to changes in the environment. Some of the history and performance of widely used protein force fields based on an equation on simplest potential energy function or closely related equations are reviewed. The chapter outlines some promising developments that go beyond this, primarily by altering the way electrostatic interactions are treated. The use of atomic multipoles and off-center charge distributions, as well as attempts to incorporate electronic polarizability, are also discussed in the chapter.

https://dasher.wustl.edu/ponder/papers/advprotchem-66-27-03.pdf

Force fields for protein simulations

: The unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio. Harmonic force fields are obtained using Density Functional Theory (DFT), MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set. DFT calculations use the Local Spin Density Approximation (LSDA), BLYP, and Becke3LYP (B3LYP) density functionals. Mid-IR spectra predicted using LSDA, BLYP, and B3LYP force fields are of significantly different quality, the B3LYP force field yielding spectra in clearly superior, and overall excellent, agreement with experiment. The MP2 force field yields spectra in slightly worse agreement with experiment than the B3LYP force field. The SCF force field yields spectra in poor agreement with experiment.The basis set dependence of B3LYP force fields is also explored: the 6-31G* and TZ2P basis sets give very similar results while the 3-21G basis set yields spectra in substantially worse agreements with experiment. jg

Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields

Ammonia activation by V+: electronic and transitional energy dependence.

Reactions of Ru+, Rh+, Pd+, and Ag+ with molecular oxygen are studied as a function of kinetic energy by using guided ion beam mass spectrometry. By using a flow tube ion source, it has been possible to create Ru+, Rh+, Pd+, and Ag+ ions in their electronic ground state terms and primarily in the lowest spin–orbit levels. All reactions are observed to be endothermic. The reactivity of ground state Ag+ is found to be particularly inefficient and is believed to occur through an impulsive pairwise mechanism. Excited states of Ag+ are observed to react efficiently at thermal energies. Analyses of the endothermic reaction cross sections yield 0 K bond dissociation energies of D0(Ru+–O)=3.81±0.05 eV, D0(Rh+–O)=3.02±0.06 eV, D0(Pd+–O)=1.46±0.11 eV, and a speculative value of D0(Ag+–O)=1.23±0.05 eV. The reactivity differences among all four metal systems and the electronic states of Ag+ are explained by using simple molecular orbital concepts.

Kinetic energy dependence of the reactions of Ru+, Rh+, Pd+, and Ag+ with O2

The interaction of the alkali metal cations, Li+, Na+, and K+, with the amino acid proline (Pro) and its four- and six-membered ring analogues, azetidine-2-carboxylic acid (Aze) and pipecolic acid (Pip), are examined in detail. Experimentally, threshold collision-induced dissociation of the M+(L) complexes, where M = Li, Na, and K and L = Pro, Aze, and Pip, with Xe are studied using a guided ion beam tandem mass spectrometer. From analysis of the kinetic energy dependent cross sections, M+−L bond dissociation energies are measured. These analyses account for unimolecular decay rates, internal energy of reactant ions, and multiple ion−molecule collisions. Ab initio calculations for a number of geometric conformations of the M+(L) complexes were determined at the B3LYP/6-311G(d,p) level with single-point energies calculated at MP2(full), B3LYP, and B3P86 levels using a 6-311+G(2d,2p) basis set. Theoretical bond energies show good agreement with the experimental bond energies, which establishes that the zwit...

The Special Five-Membered Ring of Proline: An Experimental and Theoretical Investigation of Alkali Metal Cation Interactions with Proline and Its Four- and Six-Membered Ring Analogues

Transition-metal hydride bond energies: first and second row

Benchmark scalar-relativistic coupled-cluster calculations for dissociation energies of the 20 diatomic molecules containing 3d transition metals in the 3dMLBE20 database (J. Chem. Theory Comput. 2015, 11, 2036) are reported. Electron correlation and basis set effects are systematically studied. The agreement between theory and experiment is in general satisfactory. For a subset of 16 molecules, the standard deviation between computational and experimental values is 9 kJ/mol with the maximum deviation being 15 kJ/mol. The discrepancies between theory and experiment remain substantial (more than 20 kJ/mol) for VH, CrH, CoH, and FeH. To explore the source of the latter discrepancies, the analysis used to determine the experimental dissociation energies for VH and CrH is revisited. It is shown that, if improved values are used for the heterolytic C–H dissociation energies of di- and trimethylamine involved in the experimental determination, the experimental values for the dissociation energies of VH and CrH ...

Bond Dissociation Energies for Diatomic Molecules Containing 3d Transition Metals: Benchmark Scalar-Relativistic Coupled-Cluster Calculations for 20 Molecules.

P. B. Armentrout

Papers

Ammonia activation by V+: electronic and transitional energy dependence.

Kinetic energy dependence of the reactions of Ru+, Rh+, Pd+, and Ag+ with O2

The Special Five-Membered Ring of Proline: An Experimental and Theoretical Investigation of Alkali Metal Cation Interactions with Proline and Its Four- and Six-Membered Ring Analogues

Transition-metal hydride bond energies: first and second row

Bond Dissociation Energies for Diatomic Molecules Containing 3d Transition Metals: Benchmark Scalar-Relativistic Coupled-Cluster Calculations for 20 Molecules.