https://www.massey.ac.nz/~ychisti/Biodiesel.pdf

Biodiesel from microalgae.

Sustainable production of renewable energy is being hotly debated globally since it is increasingly understood that first generation biofuels, primarily produced from food crops and mostly oil seeds are limited in their ability to achieve targets for biofuel production, climate change mitigation and economic growth. These concerns have increased the interest in developing second generation biofuels produced from non-food feedstocks such as microalgae, which potentially offer greatest opportunities in the longer term. This paper reviews the current status of microalgae use for biodiesel production, including their cultivation, harvesting, and processing. The microalgae species most used for biodiesel production are presented and their main advantages described in comparison with other available biodiesel feedstocks. The various aspects associated with the design of microalgae production units are described, giving an overview of the current state of development of algae cultivation systems (photo-bioreactors and open ponds). Other potential applications and products from microalgae are also presented such as for biological sequestration of CO 2 , wastewater treatment, in human health, as food additive, and for aquaculture.

/pdf/microalgae-for-biodiesel-production-and-other-applications-a-54vmwufrsu.pdf

Microalgae for biodiesel production and other applications: A review

Fast pyrolysis utilizes biomass to produce a product that is used both as an energy source and a feedstock for chemical production. Considerable efforts have been made to convert wood biomass to liquid fuels and chemicals since the oil crisis in mid-1970s. This review focuses on the recent developments in the wood pyrolysis and reports the characteristics of the resulting bio-oils, which are the main products of fast wood pyrolysis. Virtually any form of biomass can be considered for fast pyrolysis. Most work has been performed on wood, because of its consistency and comparability between tests. However, nearly 100 types of biomass have been tested, ranging from agricultural wastes such as straw, olive pits, and nut shells to energy crops such as miscanthus and sorghum. Forestry wastes such as bark and thinnings and other solid wastes, including sewage sludge and leather wastes, have also been studied. In this review, the main (although not exclusive) emphasis has been given to wood. The literature on woo...

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

Sustainability is a key principle in natural resource management, and it involves operational efficiency, minimisation of environmental impact and socio-economic considerations; all of which are interdependent. It has become increasingly obvious that continued reliance on fossil fuel energy resources is unsustainable, owing to both depleting world reserves and the green house gas emissions associated with their use. Therefore, there are vigorous research initiatives aimed at developing alternative renewable and potentially carbon neutral solid, liquid and gaseous biofuels as alternative energy resources. However, alternate energy resources akin to first generation biofuels derived from terrestrial crops such as sugarcane, sugar beet, maize and rapeseed place an enormous strain on world food markets, contribute to water shortages and precipitate the destruction of the world's forests. Second generation biofuels derived from lignocellulosic agriculture and forest residues and from non-food crop feedstocks address some of the above problems; however there is concern over competing land use or required land use changes. Therefore, based on current knowledge and technology projections, third generation biofuels specifically derived from microalgae are considered to be a technically viable alternative energy resource that is devoid of the major drawbacks associated with first and second generation biofuels. Microalgae are photosynthetic microorganisms with simple growing requirements (light, sugars, CO 2 , N, P, and K) that can produce lipids, proteins and carbohydrates in large amounts over short periods of time. These products can be processed into both biofuels and valuable co-products. This study reviewed the technologies underpinning microalgae-to-biofuels systems, focusing on the biomass production, harvesting, conversion technologies, and the extraction of useful co-products. It also reviewed the synergistic coupling of microalgae propagation with carbon sequestration and wastewater treatment potential for mitigation of environmental impacts associated with energy conversion and utilisation. It was found that, whereas there are outstanding issues related to photosynthetic efficiencies and biomass output, microalgae-derived biofuels could progressively substitute a significant proportion of the fossil fuels required to meet the growing energy demand.

/pdf/biofuels-from-microalgae-a-review-of-technologies-for-1t1wwr5e69.pdf

Biofuels from microalgae—A review of technologies for production, processing, and extractions of biofuels and co-products

The use of fossil fuels is now widely accepted as unsustainable due to depleting resources and the accumulation of greenhouse gases in the environment that have already exceeded the “dangerously high” threshold of 450 ppm CO2-e. To achieve environmental and economic sustainability, fuel production processes are required that are not only renewable, but also capable of sequestering atmospheric CO2. Currently, nearly all renewable energy sources (e.g. hydroelectric, solar, wind, tidal, geothermal) target the electricity market, while fuels make up a much larger share of the global energy demand (∼66%). Biofuels are therefore rapidly being developed. Second generation microalgal systems have the advantage that they can produce a wide range of feedstocks for the production of biodiesel, bioethanol, biomethane and biohydrogen. Biodiesel is currently produced from oil synthesized by conventional fuel crops that harvest the sun’s energy and store it as chemical energy. This presents a route for renewable and carbon-neutral fuel production. However, current supplies from oil crops and animal fats account for only approximately 0.3% of the current demand for transport fuels. Increasing biofuel production on arable land could have severe consequences for global food supply. In contrast, producing biodiesel from algae is widely regarded as one of the most efficient ways of generating biofuels and also appears to represent the only current renewable source of oil that could meet the global demand for transport fuels. The main advantages of second generation microalgal systems are that they: (1) Have a higher photon conversion efficiency (as evidenced by increased biomass yields per hectare): (2) Can be harvested batch-wise nearly all-year-round, providing a reliable and continuous supply of oil: (3) Can utilize salt and waste water streams, thereby greatly reducing freshwater use: (4) Can couple CO2-neutral fuel production with CO2 sequestration: (5) Produce non-toxic and highly biodegradable biofuels. Current limitations exist mainly in the harvesting process and in the supply of CO2 for high efficiency production. This review provides a brief overview of second generation biodiesel production systems using microalgae.

https://www.springer.com/cda/content/document/cda_downloaddocument/BioEnergyResearch_Second+Generation+Biofuels+High-Efficiency+Microalgae+for+Biodiesel+Production.pdf?SGWID=0-0-45-1347846-0

Second generation biofuels: high-efficiency microalgae for biodiesel production

Oil production from algal cells of Dunaliella tertiolecta by direct thermochemical liquefaction

Recovery of liquid fuel from hydrocarbon-rich microalgae by thermochemical liquefaction

CO2 fixation and oil production through microalga

A brief review of research in agricultural vehicle guidance technologies is presented. The authors propose the conceptual framework of an agricultural vehicle autonomous guidance system, and then analyze its device characteristics. This paper introduces navigation sensors, computational methods, navigation planners and steering controllers. Sensors include global positioning systems (GPS), machine vision, dead-reckoning sensors, laser-based sensors, inertial sensors and geomagnetic direction sensors. Computational methods for sensor information are used to extract features and fuse data. Planners generate movement information to supply control algorithms. Actuators transform guidance information into changes in position and direction. A number of prototype guidance systems have been developed but have not yet proceeded to commercialization. GPS and machine vision fused together or one fused with another auxiliary technology is becoming the trend development for agricultural vehicle guidance systems. Application of new popular robotic technologies will augment the realization of agricultural vehicle automation in the future. Keywords: agricultural vehicle, guidance, machine vision, GPS DOI: 10.3965/j.issn.1934-6344.2009.03.001-016 Citation: Ming Li, Kenji Imou, Katsuhiro Wakabayashi, Shinya Yokoyama. Review of research on agricultural vehicle autonomous guidance. Int J Agric & Biol Eng, 2009; 2(3): 1

http://www.abepublishing.org/journals/index.php/ijabe/article/download/160/82

Review of research on agricultural vehicle autonomous guidance

Garbage was converted directly into oil by thermochemical liquefaction for the recovery of energy in the form of liquid fuel. The garbage with a moisture content of about 90 wt% was prepared by mixing cabbage, boiled rice, boiled and dried sardine, butter, and the shell of short-necked clam. The mixture was heated under pressurized nitrogen at 250°, 300°, or 340°C for 0.1, 0.5, or 2 h, with or without sodium carbonate as a catalyst (0 or 4% on a dry solid basis). Oil yield and its properties strongly depended on catalyst addition and reaction temperature, while holding time showed no marked effect. Oil was obtained in the highest yield of 27.6% on an organic basis under the following conditions: catalyst addition, 4 wt%; temperature, 340°C; pressure, 18 MPa; and holding time, 0.5 h. The oil had a calorific value of 36 MJ kg−1 and a viscosity of 53,000 mPas at 50°C. Its carbon content, hydrogen content, nitrogen content and oxygen content were 73.6, 9.1, 4.6 and 12.7%, respectively.

Shinya Yokoyama

Papers

Oil production from algal cells of Dunaliella tertiolecta by direct thermochemical liquefaction

Recovery of liquid fuel from hydrocarbon-rich microalgae by thermochemical liquefaction

CO2 fixation and oil production through microalga

Review of research on agricultural vehicle autonomous guidance

Oil production from garbage by thermochemical liquefaction