There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Optical Waveguide Theory

Materials and structures with negative Poisson's ratio exhibit a counter-intuitive behaviour. Under uniaxial compression (tension), these materials and structures contract (expand) transversely. The materials and structures that possess this feature are also termed as 'auxetics'. Many desirable properties resulting from this uncommon behaviour are reported. These superior properties offer auxetics broad potential applications in the fields of smart filters, sensors, medical devices and protective equipment. However, there are still challenging problems which impede a wider application of auxetic materials. This review paper mainly focuses on the relationships among structures, materials, properties and applications of auxetic metamaterials and structures. The previous works of auxetics are extensively reviewed, including different auxetic cellular models, naturally observed auxetic behaviour, different desirable properties of auxetics, and potential applications. In particular, metallic auxetic materials and a methodology for generating 3D metallic auxetic materials are reviewed in details. Although most of the literature mentions that auxetic materials possess superior properties, very few types of auxetic materials have been fabricated and implemented for practical applications. Here, the challenges and future work on the topic of auxetics are also presented to inspire prospective research work. This review article covers the most recent progress of auxetic metamaterials and auxetic structures. More importantly, several drawbacks of auxetics are also presented to caution researchers in the future study.

Auxetic metamaterials and structures: a review

Nano reinforced cement and concrete composites and new perspective from graphene oxide

There has been much effort to provide eco-friendly and biodegradable materials for the next generation of composite products owing to global environmental concerns and increased awareness of renewable green resources. An increase in the use of natural materials in composites has led to a reduction in greenhouse gas emissions and carbon footprint of composites. In addition to the benefits obtained from green materials, there are some challenges in working with them, such as poor compatibility between the reinforcing natural fiber and matrix and the relatively high moisture absorption of natural fibers. Green composites can be a suitable alternative for petroleum-based materials. However, before this can be accomplished, there are a number of issues that need to be addressed, including poor interfacial adhesion between the matrix and natural fibers, moisture absorption, poor fire resistance, low impact strength, and low durability. Several researchers have studied the properties of natural fiber composites. These investigations have resulted in the development of several procedures for modifying natural fibers and resins. To address the increasing demand to use eco-friendly materials in different applications, an up-do-date review on natural fiber and resin types and sources, modification and processing techniques, physical and mechanical behaviors, applications, life-cycle assessment, and other properties of green composites is required to provide a better understanding of the behavior of green composites. This paper presents such a review based on 322 studies published since 1978.

A review of natural fiber composites: properties, modification and processing techniques, characterization, applications

Excellent mechanical, thermal, and electrical properties of carbon nanotubes (CNTs) and nanofibers (CNFs) have motivated the development of advanced nanocomposites with outstanding and multifunctional properties. After achieving a considerable success in utilizing these unique materials in various polymeric matrices, recently tremendous interest is also being noticed on developing CNT and CNF reinforced cement-based composites. However, the problems related to nanomaterial dispersion also exist in case of cementitious composites, impairing successful transfer of nanomaterials' properties into the composites. Performance of cementitious composites also depends on their microstructure which is again strongly influenced by the presence of nanomaterials. In this context, the present paper reports a critical review of recent literature on the various strategies for dispersing CNTs and CNFs within cementitious matrices and the microstructure and mechanical properties of resulting nanocomposites.

/pdf/a-review-on-nanomaterial-dispersion-microstructure-and-12bvrpln6q.pdf

A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites

Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique

We numerically demonstrate a surface plasmon resonance biosensor-based on dual-polarized spiral photonic crystal fiber (PCF). Chemically stable gold material is used as the active plasmonic material, which is placed on the outer layer of the PCF to facilitate practical fabrication. Finite-element method-based numerical investigations show that the proposed biosensor shows maximum wavelength sensitivity of 4600 and 4300 nm/RIU in ${x}$ - and ${y}$ -polarized modes at an analyte refractive index of 1.37. Moreover, for analyte refractive index ranging from 1.33 to 1.38, maximum amplitude sensitivities of 371.5 RIU−1 and 420.4 RIU−1 are obtained in ${x}$ - and ${y}$ -polarized modes, respectively. In addition, the effects of changing pitch, different air hole diameter of the PCF and thickness of the gold layer on the sensing performance are also investigated. Owing to high sensitivity, improved sensing resolution and appropriate linearity characteristics, the proposed dual-polarized spiral PCF can be implemented for the detection of biological analytes, organic chemicals, biomolecules, and other unknown analytes.

Spiral Photonic Crystal Fiber-Based Dual-Polarized Surface Plasmon Resonance Biosensor

In this paper, we numerically demonstrate a two-layer circular lattice photonic crystal fiber (PCF) biosensor based on the principle of surface plasmon resonance (SPR). The finite element method (FEM) with circular perfectly matched layer (PML) boundary condition is applied to evaluate the performance of the proposed sensor. A thin gold layer is deposited outside the PCF structure, which acts as the plasmonic material for this design. The sensing layer (analyte) is implemented in the outermost layer, which permits easy and more practical fabrication process compared to analyte is put inside the air holes. It is demonstrated that, at gold layer thickness of 40 nm, the proposed sensor shows maximum sensitivity of 2200 nm/RIU using the wavelength interrogation method in the sensing range between 1.33–1.36. Besides, using an amplitude interrogation method, a maximum sensitivity of 266 RIU−1 and a maximum sensor resolution of 3.75 × 10−5 RIU are obtained. We also discuss how phase matching points are varied with different fiber parameters. Owing to high sensitivity and simple design, the proposed sensor may find important applications in biochemical and biological analyte detection.

https://www.mdpi.com/2304-6732/4/1/18/pdf

A Highly Sensitive Gold-Coated Photonic Crystal Fiber Biosensor Based on Surface Plasmon Resonance

Carbon nanotubes are the major component of nanotechnology and a considerable area of research, due to their outstanding physical and mechanical properties. Since their discovery in 1991, extensive research has been carried out to understand and exploit these unique properties in the form of composites for various applications. But the main challenge lies in transferring the properties of carbon nanotubes to the nanocomposites successfully. In this paper, recent research in the field of carbon nanotubes reinforced epoxy composites and carbon epoxy three phase composites are reviewed.

Sohel Rana

Papers

A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites

Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique

Spiral Photonic Crystal Fiber-Based Dual-Polarized Surface Plasmon Resonance Biosensor

A Highly Sensitive Gold-Coated Photonic Crystal Fiber Biosensor Based on Surface Plasmon Resonance

A Review on Carbon Epoxy Nanocomposites