A new method called the neighbor-joining method is proposed for reconstructing phylogenetic trees from evolutionary distance data. The principle of this method is to find pairs of operational taxonomic units (OTUs [= neighbors]) that minimize the total branch length at each stage of clustering of OTUs starting with a starlike tree. The branch lengths as well as the topology of a parsimonious tree can quickly be obtained by using this method. Using computer simulation, we studied the efficiency of this method in obtaining the correct unrooted tree in comparison with that of five other tree-making methods: the unweighted pair group method of analysis, Farris's method, Sattath and Tversky's method, Li's method, and Tateno et al.'s modified Farris method. The new, neighbor-joining method and Sattath and Tversky's method are shown to be generally better than the other methods.

/pdf/the-neighbor-joining-method-a-new-method-for-reconstructing-j5gk4xv4lj.pdf

The neighbor-joining method: a new method for reconstructing phylogenetic trees.

Some simple formulae were obtained which enable us to estimate evolutionary distances in terms of the number of nucleotide substitutions (and, also, the evolutionary rates when the divergence times are known). In comparing a pair of nucleotide sequences, we distinguish two types of differences; if homologous sites are occupied by different nucleotide bases but both are purines or both pyrimidines, the difference is called type I (or “transition” type), while, if one of the two is a purine and the other is a pyrimidine, the difference is called type II (or “transversion” type). Letting P and Q be respectively the fractions of nucleotide sites showing type I and type II differences between two sequences compared, then the evolutionary distance per site is K = — (1/2) ln {(1 — 2P — Q) }. The evolutionary rate per year is then given by k = K/(2T), where T is the time since the divergence of the two sequences. If only the third codon positions are compared, the synonymous component of the evolutionary base substitutions per site is estimated by K'S = — (1/2) ln (1 — 2P — Q). Also, formulae for standard errors were obtained. Some examples were worked out using reported globin sequences to show that synonymous substitutions occur at much higher rates than amino acid-altering substitutions in evolution.

A simple method for estimating evolutionary rates of base substitutions through comparative studies of nucleotide sequences.

Summary: The program MODELTEST uses log likelihood scores to establish the model of DNA evolution that best fits the data. Availability: The MODELTEST package, including the source code and some documentation is available at http://bioag.byu.edu/zoology/crandall―lab/modeltest.html. Contact: dp47@email.byu.edu.

/pdf/modeltest-testing-the-model-of-dna-substitution-2dmippvvyz.pdf

MODELTEST: testing the model of DNA substitution.

The increase in the number of large data sets and the complexity of current probabilistic sequence evolution models necessitates fast and reliable phylogeny reconstruction methods. We describe a new approach, based on the maximum- likelihood principle, which clearly satisfies these requirements. The core of this method is a simple hill-climbing algorithm that adjusts tree topology and branch lengths simultaneously. This algorithm starts from an initial tree built by a fast distance-based method and modifies this tree to improve its likelihood at each iteration. Due to this simultaneous adjustment of the topology and branch lengths, only a few iterations are sufficient to reach an optimum. We used extensive and realistic computer simulations to show that the topological accuracy of this new method is at least as high as that of the existing maximum-likelihood programs and much higher than the performance of distance-based and parsimony approaches. The reduction of computing time is dramatic in comparison with other maximum-likelihood packages, while the likelihood maximization ability tends to be higher. For example, only 12 min were required on a standard personal computer to analyze a data set consisting of 500 rbcL sequences with 1,428 base pairs from plant plastids, thus reaching a speed of the same order as some popular distance-based and parsimony algorithms. This new method is implemented in the PHYML program, which is freely available on our web page: http://www.lirmm.fr/w3ifa/MAAS/. (Algorithm; computer simulations; maximum likelihood; phylogeny; rbcL; RDPII project.) The size of homologous sequence data sets has in- creased dramatically in recent years, and many of these data sets now involve several hundreds of taxa. More- over, current probabilistic sequence evolution models (Swofford et al., 1996 ; Page and Holmes, 1998 ), notably those including rate variation among sites (Uzzell and Corbin, 1971 ; Jin and Nei, 1990 ; Yang, 1996 ), require an increasing number of calculations. Therefore, the speed of phylogeny reconstruction methods is becoming a sig- nificant requirement and good compromises between speed and accuracy must be found. The maximum likelihood (ML) approach is especially accurate for building molecular phylogenies. Felsenstein (1981) brought this framework to nucleotide-based phy- logenetic inference, and it was later also applied to amino acid sequences (Kishino et al., 1990). Several vari- ants were proposed, most notably the Bayesian meth- ods (Rannala and Yang 1996; and see below), and the discrete Fourier analysis of Hendy et al. (1994), for ex- ample. Numerous computer studies (Huelsenbeck and Hillis, 1993; Kuhner and Felsenstein, 1994; Huelsenbeck, 1995; Rosenberg and Kumar, 2001; Ranwez and Gascuel, 2002) have shown that ML programs can recover the cor- rect tree from simulated data sets more frequently than other methods can. Another important advantage of the ML approach is the ability to compare different trees and evolutionary models within a statistical framework (see Whelan et al., 2001, for a review). However, like all optimality criterion-based phylogenetic reconstruction approaches, ML is hampered by computational difficul- ties, making it impossible to obtain the optimal tree with certainty from even moderate data sets (Swofford et al., 1996). Therefore, all practical methods rely on heuristics that obtain near-optimal trees in reasonable computing time. Moreover, the computation problem is especially difficult with ML, because the tree likelihood not only depends on the tree topology but also on numerical pa- rameters, including branch lengths. Even computing the optimal values of these parameters on a single tree is not an easy task, particularly because of possible local optima (Chor et al., 2000). The usual heuristic method, implemented in the pop- ular PHYLIP (Felsenstein, 1993 ) and PAUP ∗ (Swofford, 1999 ) packages, is based on hill climbing. It combines stepwise insertion of taxa in a growing tree and topolog- ical rearrangement. For each possible insertion position and rearrangement, the branch lengths of the resulting tree are optimized and the tree likelihood is computed. When the rearrangement improves the current tree or when the position insertion is the best among all pos- sible positions, the corresponding tree becomes the new current tree. Simple rearrangements are used during tree growing, namely "nearest neighbor interchanges" (see below), while more intense rearrangements can be used once all taxa have been inserted. The procedure stops when no rearrangement improves the current best tree. Despite significant decreases in computing times, no- tably in fastDNAml (Olsen et al., 1994 ), this heuristic becomes impracticable with several hundreds of taxa. This is mainly due to the two-level strategy, which sepa- rates branch lengths and tree topology optimization. In- deed, most calculations are done to optimize the branch lengths and evaluate the likelihood of trees that are finally rejected. New methods have thus been proposed. Strimmer and von Haeseler (1996) and others have assembled four- taxon (quartet) trees inferred by ML, in order to recon- struct a complete tree. However, the results of this ap- proach have not been very satisfactory to date (Ranwez and Gascuel, 2001 ). Ota and Li (2000, 2001) described

A simple, fast, and accurate algorithm to estimate large phylogenies by maximum likelihood.

PhyML is a phylogeny software based on the maximum-likelihood principle. Early PhyML versions used a fast algorithm performing nearest neighbor interchanges to improve a reasonable starting tree topology. Since the original publication (Guindon S., Gascuel O. 2003. A simple, fast and accurate algorithm to estimate large phylogenies by maximum likelihood. Syst. Biol. 52:696-704), PhyML has been widely used (>2500 citations in ISI Web of Science) because of its simplicity and a fair compromise between accuracy and speed. In the meantime, research around PhyML has continued, and this article describes the new algorithms and methods implemented in the program. First, we introduce a new algorithm to search the tree space with user-defined intensity using subtree pruning and regrafting topological moves. The parsimony criterion is used here to filter out the least promising topology modifications with respect to the likelihood function. The analysis of a large collection of real nucleotide and amino acid data sets of various sizes demonstrates the good performance of this method. Second, we describe a new test to assess the support of the data for internal branches of a phylogeny. This approach extends the recently proposed approximate likelihood-ratio test and relies on a nonparametric, Shimodaira-Hasegawa-like procedure. A detailed analysis of real alignments sheds light on the links between this new approach and the more classical nonparametric bootstrap method. Overall, our tests show that the last version (3.0) of PhyML is fast, accurate, stable, and ready to use. A Web server and binary files are available from http://www.atgc-montpellier.fr/phyml/.

https://www.zora.uzh.ch/id/eprint/155669/1/ZORA_NL_155669.pdf

New Algorithms and Methods to Estimate Maximum-Likelihood Phylogenies: Assessing the Performance of PhyML 3.0

CHAPTER 24 – Evolution of Protein Molecules

NonDarwinian evolution of protein and DNA, comparing expectations of evolution models for protein and amino acid changes

http://science.sciencemag.org/content/sci/164/3881/788.full.pdf

Non-Darwinian Evolution

“Homology” in proteins and nucleic acids: A terminology muddle and a way out of it

The genetic code, once thought to be "frozen," shows variations from the universal code. Variations are found in mitochondria, Mycoplasma, and ciliated protozoa. The variations result from reassignment of codons, especially stop codons. The reassignments take place by disappearance of a codon from coding sequences, followed by its reappearance in a new role. Simultaneously, a changed anticodon must appear. We discuss the role of directional mutation pressure in the events, and we also describe the possibility that such events have taken place during early evolution of the genetic code and can occur during its present evolution.

Thomas H. Jukes

Papers

CHAPTER 24 – Evolution of Protein Molecules

Non-Darwinian Evolution

“Homology” in proteins and nucleic acids: A terminology muddle and a way out of it

Codon reassignment (codon capture) in evolution

The welfare state