Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Fast parallel algorithms for short-range molecular dynamics

다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...

Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?

There is still an ongoing effort to search for sustainable, clean and highly efficient energy generation to satisfy the energy needs of modern society. Among various advanced technologies, electrocatalysis for the oxygen evolution reaction (OER) plays a key role and numerous new electrocatalysts have been developed to improve the efficiency of gas evolution. Along the way, enormous effort has been devoted to finding high-performance electrocatalysts, which has also stimulated the invention of new techniques to investigate the properties of materials or the fundamental mechanism of the OER. This accumulated knowledge not only establishes the foundation of the mechanism of the OER, but also points out the important criteria for a good electrocatalyst based on a variety of studies. Even though it may be difficult to include all cases, the aim of this review is to inspect the current progress and offer a comprehensive insight toward the OER. This review begins with examining the theoretical principles of electrode kinetics and some measurement criteria for achieving a fair evaluation among the catalysts. The second part of this review acquaints some materials for performing OER activity, in which the metal oxide materials build the basis of OER mechanism while non-oxide materials exhibit greatly promising performance toward overall water-splitting. Attention of this review is also paid to in situ approaches to electrocatalytic behavior during OER, and this information is crucial and can provide efficient strategies to design perfect electrocatalysts for OER. Finally, the OER mechanism from the perspective of both recent experimental and theoretical investigations is discussed, as well as probable strategies for improving OER performance with regards to future developments.

Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives

The efficiency of many energy storage technologies, such as rechargeable metal-air batteries and hydrogen production from water splitting, is limited by the slow kinetics of the oxygen evolution reaction (OER). We found that Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3–δ (BSCF) catalyzes the OER with intrinsic activity that is at least an order of magnitude higher than that of the state-of-the-art iridium oxide catalyst in alkaline media. The high activity of BSCF was predicted from a design principle established by systematic examination of more than 10 transition metal oxides, which showed that the intrinsic OER activity exhibits a volcano-shaped dependence on the occupancy of the 3d electron with an e g symmetry of surface transition metal cations in an oxide. The peak OER activity was predicted to be at an e g occupancy close to unity, with high covalency of transition metal–oxygen bonds.

https://science.sciencemag.org/content/sci/early/2011/10/26/science.1212858.full.pdf

A perovskite oxide optimized for oxygen evolution catalysis from molecular orbital principles.

Editorial for the special issue of “Celebrating Prof. San Ping Jiang's 65th Birthday”

Metal–air batteries are a type of electrochemical cell that generates electrical energy by combining metal and oxygen from the air. They are a promising technology for energy storage and portable devices because of their high energy density, low cost, and environmental friendliness. However, the discharge products of these batteries are notoriously difficult to decompose, resulting in a high overpotential. Recent works have shown that semiconductors can capture solar energy and store it in batteries. When exposed to light, photocatalysts generate carriers (strong redox pairs), thereby increasing the electron migration rate and significantly reducing the overpotential of the metal–air battery reaction. Nevertheless, single photocatalysts often exhibit poor cycle performance due to serious carrier recombination. This review paper begins by briefly describing the fundamentals of photoelectrochemistry and then focuses on commonly used photocathode design principles and various reported photocatalysts. It also discusses the main challenges and issues caused by light, such as photocorrosion and electrolyte decomposition. Finally, the critical issues associated with photo electrodes, electrolytes, and electrode/electrolyte interfaces are emphasized, and perspectives on the development of high-performance light-assisted metal–air batteries are presented. 

Air Cathode Design for Light-Assisted Charging of Metal–Air Batteries: Recent Advances and Perspectives

Novel High-Entropy Oxides for Energy Storage and Conversion: From Fundamentals to Practical Applications

Development of high temperature polymer electrolyte membrane fuel cells (HT‐PEMFCs) at elevated temperatures is important for the enhancement of tolerance toward CO impurities and for the development of non‐precious metal catalysts. The key challenge in such HT‐PEMFCs is the high temperature polymer electrolyte membranes. Herein, the development of in situ formed metal pyrophosphates (MP2O7, where M = Sn, Ti, and Zr) in phosphoric acid doped polybenzimidazole (PA/PBI) composite membranes for HT‐PEMFCs is reported. The formation mechanism of MP2O7, and characteristics of MP2O7/PA/PBI composite membranes are studied in detail. In contrast to the rapid decay in performance of pristine PA/PBI membrane cells, the in situ formed MP2O7/PA/PBI composite membranes show significantly higher proton conductivity, improved performance, and stability at elevated temperatures of 200–250 °C. The best results are obtained on the in situ formed SnP2O7/PA/PBI composite membrane cells, exhibiting a high peak power density of 476 mW cm−2 and proton conductivity of 51.3 mS cm−1 at 250 °C. The excellent durability of SnP2O7/PA/PBI composite membrane is due to the uniform distribution of in situ formed SnP2O7 nanoparticles in PBI membranes and the formation of a gel‐like region, thin and irregular amorphous layer on the SnP2O7 with the high acid retention ability. This effectively alleviates the PA leaching at elevated temperatures of the new HT‐PEMFCs.

Zongping Shao

Papers

Editorial for the special issue of “Celebrating Prof. San Ping Jiang's 65th Birthday”

Air Cathode Design for Light-Assisted Charging of Metal–Air Batteries: Recent Advances and Perspectives

Novel High-Entropy Oxides for Energy Storage and Conversion: From Fundamentals to Practical Applications

Development of In Situ Formed Metal Pyrophosphates (MP2O7, Where M = Sn, Ti, and Zr)/PA/PBI Based Composite Membranes for Fuel Cells

ZnHCF@PB nanoparticles with reduced bandgap as a promising photocatalyst for the degradation of conventional and emerging water contaminants.