Showing papers in "arXiv: Soft Condensed Matter in 2004"
TL;DR: In this paper, a hole mobility for the organic conductor pentacene of 35 cm2/Vs at room temperature increasing to 58 cm2 /Vs at 225k was obtained.
Abstract: We have obtained a hole mobility for the organic conductor pentacene of 35 cm2/Vs at room temperature increasing to 58 cm2/Vs at 225K. These high mobilities result from a purification process in which 6,13-pentacenequinone was removed by vacuum sublimation. The number of traps is reduced by two orders of magnitude compared with conventional methods. The temperature depandence of the mobility is consistent with the band model for electronic transport.
750 citations
TL;DR: In this article, a series of 20 ps ab initio molecular dynamic simulations of water at ambient density and temperatures ranging from 300 to 450k are presented, where Car-Parrinello (CP) and Born-Oppenheimer (BO) molecular dynamics techniques are compared for systems containing 54 and 64 water molecules.
Abstract: A series of 20 ps ab initio molecular dynamic simulations of water at ambient density and temperatures ranging from 300 to 450K are presented. Both Car-Parrinello (CP) and Born-Oppenheimer (BO) molecular dynamics techniques are compared for systems containing 54 and 64 water molecules. At 300K, excellent agreement is found between radial distribution functions (RDFs) obtained with BO and CP dynamics, provided an appropriately small value of the fictitious mass parameter is used in the CP simulation. However, we find that the diffusion coefficients computed from CP dynamics are approximately two times larger than the corresponding BO simulations for T>400K, where statistically meaningful comparisons can be made. Overall, both BO and CP dynamics at 300 K yield overstructured RDFs and slow diffusion as compared to experiment. In order to understand these discrepancies, the effect of proton quantum motion is considered with the use of empirical interaction potentials. We find strong evidence that proton quantum effects may have a larger impact than previously thought on structure and diffusion of the liquid.
314 citations
TL;DR: In this paper, the density of states of a recently simulated system, comprised of weakly compressed spheres at zero temperature, was analyzed, and it was shown that a large excess of low-frequency vibrational modes in comparison with crystalline solids is a necessary consequence of the geometry generic to weakly connected solids.
Abstract: Glasses have a large excess of low-frequency vibrational modes in comparison with crystalline solids. We show that such a feature is a necessary consequence of the geometry generic to weakly connected solids. In particular, we analyze the density of states of a recently simulated system, comprised of weakly compressed spheres at zero temperature. We account for the observed a) constancy of the density of modes with frequency, b) appearance of a low-frequency cutoff, and c) power-law increase of this cutoff with compression. We predict a length scale below which vibrations are very different from those of a continuous elastic body.
300 citations
Posted Content•
TL;DR: Hydrogen-bonding analysis reveals that a large fraction of ethanols is involved in hydrogen bonds with lipids, which is intimately coupled to the ordering of hydrocarbon chains: it is found that binding to an ethanol decreases the order of the chains.
Abstract: Extensive microscopic molecular dynamics simulations have been performed to study the effects of short-chain alcohols, methanol and ethanol, on two different fully hydrated lipid bilayer systems in the fluid phase at 323 K. It is found that ethanol has a stronger effect on the structural properties of the membranes. In particular, the bilayers become more fluid and permeable: Ethanol molecules are able to penetrate through the membrane in typical time scales of about 200 ns whereas for methanol that time scale is considerably longer, at least of the order of microseconds. We find good agreement with NMR and micropipette studies. We have also measured partitioning coefficients and the rate of crossing events for alcohols, i.e., typical time scale it takes for a molecule to cross the lipid bilayer and to move from one leaflet to the other. For structural properties, two-dimensional centre of mass radial-distribution functions indicate the possibility for quasi long-range order for ethanol-ethanol correlations in contrast to liquid-like behaviour for all other combinations.
260 citations
Posted Content•
TL;DR: In this article, the authors present a theory for micelle assembly that combines the account of this constraint with a description of the hydrophobic driving force, which arises from the length scale dependence of aqueous solvation.
Abstract: The tendency of amphiphilic molecules to form micelles in aqueous solution is a consequence of the hydrophobic effect. The fundamental difference between micelle assembly and macroscopic phase separation is the stoichiometric constraint that frustrates the demixing of polar and hydrophobic groups. We present a theory for micelle assembly that combines the account of this constraint with a description of the hydrophobic driving force. The latter arises from the length scale dependence of aqueous solvation. The theoretical predictions for temperature dependence and surfactant chain length dependence of critical micelle concentrations for nonionic surfactants agree favorably with experiment.
193 citations
TL;DR: In this article, the authors show that the density and temperature dependences of the relaxation time of several glassforming polymers can be described by a single scaling variable, where the variable is well fitted by a power law.
Abstract: We show that the density and temperature dependences of the $\alpha$-relaxation time of several glassforming polymers can be described through a single scaling variable $X=e(\rho)/T$, where $e(\rho)$ is well fitted by a power law $\rho^x$, $x$ being a species-specific parameter. This implies that ``fragility'' is an intrinsic, density-independent property of a glassformer characterizing its super-Arrhenius slowing down of relaxations, and it leads us to propose a modification of the celebrated Angell plot.
186 citations
Posted Content•
TL;DR: In this article, the ground state energies and geometries for clusters of different sizes (up to 80 particles) were derived for short-ranged attractive and long-ranged repulsive potentials.
Abstract: We report calculations of the ground state energies and geometries for clusters of different sizes (up to 80 particles), where individual particles interact simultaneously via a short-ranged attractive -modeled with a generalization of the Lennard-Jones potential- and a long-ranged repulsive Yukawa potential. We show that, for specific choices of the parameters of the repulsive potential, the ground state energy per particle has a minimum at a finite cluster size. For these values of the parameters in the thermodynamic limit, at low temperatures and small packing fractions -where clustering is favored and cluster-cluster interactions can be neglected- thermodynamically stable cluster phases can be formed. The analysis of the ground state geometries shows that the spherical shape is marginally stable. In the majority of the studied cases, we find that, above a certain size, ground state clusters preferentially grow almost in one dimension.
156 citations
TL;DR: In this paper, the displacement controlled peeling of a flexible plate from an incision-patterned thin adhesive elastic layer was investigated. And the authors found that crack initiation from a single incision on the film occurs at a load much higher than that required to propagate it on a smooth adhesive surface; multiple incisions thus cause the crack to propagate intermittently.
Abstract: Inspired by the observation that many naturally occurring adhesives arise as textured thin films, we consider the displacement controlled peeling of a flexible plate from an incision-patterned thin adhesive elastic layer. We find that crack initiation from an incision on the film occurs at a load much higher than that required to propagate it on a smooth adhesive surface; multiple incisions thus cause the crack to propagate intermittently. Microscopically, this mode of crack initiation and propagation in geometrically confined thin adhesive films is related to the nucleation of cavitation bubbles behind the incision which must grow and coalesce before a viable crack propagates. Our theoretical analysis allows us to rationalize these experimental observations qualitatively and quantitatively and suggests a simple design criterion for increasing the interfacial fracture toughness of adhesive films.
150 citations
TL;DR: In this article, a new type of phase separation in polyelectrolyte solutions consisting of several types of charged macromolecules differing in their degree of ionization is predicted via a general thermodynamic consideration.
Abstract: A new type of phase separation in the polyelectrolyte solutions consisting of several types of charged macromolecules differing in their degree of ionization is predicted via a general thermodynamic consideration. We show that even a small difference in the degree of ionization of otherwise equivalent components results in their spatial separation occurring upon decreasing the temperature much earlier than precipitation of the components from the solution. Some implications of charge fractionation in biological processes are discussed.
148 citations
TL;DR: In this article, the phase behavior of the Baxter adhesive hard sphere fluid has been determined using specialized Monte Carlo simulations, and a detailed account of the techniques used and present data for the fluid-fluid coexistence curve as well as parametrized fits for the supercritical equation of state and the percolation threshold.
Abstract: The phase behavior of the Baxter adhesive hard sphere fluid has been determined using specialized Monte Carlo simulations. We give a detailed account of the techniques used and present data for the fluid-fluid coexistence curve as well as parametrized fits for the supercritical equation of state and the percolation threshold. These properties are compared with the existing results of Percus-Yevick theory for this system.
132 citations
TL;DR: In this paper, the authors study the deformation of fluid-immersed soft interfaces and show that elastic deformation couples tangential and normal forces and thus generates lift, and find an optimal combination of geometric and material parameters that maximizes the dimensionless normal force as a function of the softness parameter.
Abstract: We study the lubrication of fluid-immersed soft interfaces and show that elastic deformation couples tangential and normal forces and thus generates lift. We consider materials that deform easily, due to either geometry (e.g. a shell) or constitutive properties (e.g. a gel or a rubber), so that the effects of pressure and temperature on the fluid properties may be neglected. Four different system geometries are considered: a rigid cylinder moving parallel to a soft layer coating a rigid substrate; a soft cylinder moving parallel to a rigid substrate; a cylindrical shell moving parallel to a rigid substrate; and finally a cylindrical conforming journal bearing coated with a thin soft layer. In addition, for the particular case of a soft layer coating a rigid substrate we consider both elastic and poroelastic material responses. For all these cases we find the same generic behavior: there is an optimal combination of geometric and material parameters that maximizes the dimensionless normal force as a function of the softness parameter = hydrodynamic pressure/elastic stiffness = surface deflection/gap thickness which characterizes the fluid-induced deformation of the interface. The corresponding cases for a spherical slider are treated using scaling concepts.
Posted Content•
TL;DR: In this paper, a theory is constructed to describe the zero-temperature jamming transition as the density of repulsive soft spheres is increased, and numerical simulations suggest that in finite dimensions the $k$-core transition can be discontinuous with a nontrivial diverging correlation length.
Abstract: A theory is constructed to describe the zero-temperature jamming transition as the density of repulsive soft spheres is increased. Local mechanical stability imposes a constraint on the minimum number of bonds per particle; we argue that this constraint suggests an analogy to $k$-core percolation. The latter model can be solved exactly on the Bethe lattice, and the resulting transition has a mixed first-order/continuous character. The exponents characterizing the continuous part appear to be the same as for the jamming transition. Finally, numerical simulations suggest that in finite dimensions the $k$-core transition can be discontinuous with a nontrivial diverging correlation length.
TL;DR: In this article, the impact of a solvent on the surface chemistry of Cr$_2$O$_3, the passivating layer of stainless steel alloys, was investigated. And the results indicated that the dielectric screening properties of water are important to the passivation effects of the oxygen-terminated surface.
Abstract: Using a new form of density functional theory for the {\em ab initio} description of electronic systems in contact with a dielectric environment, we present the first detailed study of the impact of a solvent on the surface chemistry of Cr$_2$O$_3$, the passivating layer of stainless steel alloys. Compared to vacuum, we predict that the presence of water has little impact on the adsorption of chloride ions to the oxygen-terminated surface but a dramatic effect on the binding of hydrogen to that surface. These results indicate that the dielectric screening properties of water are important to the passivating effects of the oxygen-terminated surface.
Posted Content•
TL;DR: In this article, it was shown that the crossover from free-flowing to locked-in transport can depend exponentially on an object's size, with this exceptional selectivity emerging from the periodicity of the environment.
Abstract: Objects driven through periodically modulated potential-energy landscapes in two dimensions can become locked in to symmetry-selected directions that are independent of the driving force's orientation. We investigate this problem in the overdamped limit, and demonstrate that the crossover from free-flowing to locked-in transport can depend exponentially on an object's size, with this exceptional selectivity emerging from the periodicity of the environment.
Posted Content•
TL;DR: In this paper, an infrared and Raman spectroscopy study of tungsten oxide-organic layered hybrid materials has been carried out, showing that the longer chains are bound by electrostatic interactions as well as or in place of the hydrogen bonding that must be present in the shorter chain ethylenediamine hybrids.
Abstract: Tungsten oxide-organic layered hybrid materials have been studied by infrared and Raman spectroscopy, and demonstrate a difference in bonding nature as the length of the interlayer organic `spacer' molecule is increased. Ethylenediamine-tungsten oxide clearly displays a lack of terminal -NH3+ ammonium groups which appear in hybrids with longer alkane molecules, thus indicating that the longer chains are bound by electrostatic interactions as well as or in place of the hydrogen bonding that must be present in the shorter chain ethylenediamine hybrids. The presence of organic molecules between the tungsten oxide layers, compared with the layered tungstic acid H2WO4, shows a decrease in the apical W=O bond strength, as might be expected from the aforementioned electrostatic interaction.
TL;DR: In this paper, a geometric scheme is proposed to discuss the shape equation of closed lipid bilayers and boundary conditions of two-component membranes, shape equation and in-plane strain equations of cell membranes with cross-linking structures.
Abstract: The purpose of this paper is to study the shapes and stabilities of bio-membranes within the framework of exterior differential forms. After a brief review of the current status in theoretical and experimental studies on the shapes of bio-membranes, a geometric scheme is proposed to discuss the shape equation of closed lipid bilayers, the shape equation and boundary conditions of open lipid bilayers and two-component membranes, the shape equation and in-plane strain equations of cell membranes with cross-linking structures, and the stabilities of closed lipid bilayers and cell membranes. The key point of this scheme is to deal with the variational problems on the surfaces embedded in three-dimensional Euclidean space by using exterior differential forms.
Posted Content•
TL;DR: A simple and compact analytical formula is proposed for approximating the Voronoi cell's size-distribution function in the practically important 2D and 3D cases as well.
Abstract: Poisson Voronoi diagrams are useful for modeling and describing various natural patterns and for generating random lattices. Although this particular space tessellation is intensively studied by mathematicians, in two- and three dimensional spaces there is no exact result known for the size-distribution of Voronoi cells. Motivated by the simple form of the distribution function in the one-dimensional case, a simple and compact analytical formula is proposed for approximating the Voronoi cell's size distribution function in the practically important two- and three dimensional cases as well. Denoting the dimensionality of the space by d (d=1,2,3) the $f(y)=Const*y^{(3d-1)/2}exp(-(3d+1)y/2)$ compact form is suggested for the normalized cell-size distribution function. By using large-scale computer simulations the validity of the proposed distribution function is studied and critically discussed.
TL;DR: In this article, the authors examined the SPCE and TIP5P water models to study heat capacity effects associated with the hydrophobic hydration and interaction of Xenon particles, and calculated the excess chemical potential for Xenon employing the Widom particle insertion technique.
Abstract: We examine the SPCE and TIP5P water models to study heat capacity effects associated with the hydrophobic hydration and interaction of Xenon particles. We calculate the excess chemical potential for Xenon employing the Widom particle insertion technique. The solvation enthalpy and excess heat capacity is obtained from the temperature dependence of the chemical potentials and, alternatively, directly by Ewald summation, as well as a reaction field based method. All three different approaches provide consistent results. The reaction field method allows a separation of the individual components to the heat capacity of solvation into solute/solvent and solvent/solvent parts, revealing the solvent/solvent part as the dominating contribution. A detailed spacial analysis of the heat capacity of the water molecules around a pair of Xenon particles at different separations reveals that the enhanced heat capacity of the water molecules in the bisector plane between two Xenon atoms is responsible for the maximum of the heat capacity observed at the desolvation barrier, recently reported by Shimizu and Chan ({\em J. Am. Chem. Soc.},{\bf 123}, 2083--2084 (2001)). The about 60% enlarged heat capacity of water in the concave part of the joint Xenon-Xenon hydration shell is the result of a counterplay of strengthened hydrogen bonds and an enhanced breaking of hydrogen bonds with increasing temperature. Differences between the two models concerning the heat capacity in the Xenon-Xenon contact state are attributed to the different water model bulk heat capacities, and to the different spacial extension of the structure effect introduced by the hydrophobic particles. Similarities between the different states of water in the joint Xenon-Xenon hydration shell and the properties of stretched water are discussed.
TL;DR: In this paper, the authors studied the mobility of a charged colloidal particle in a constant homogeneous electric field by means of computer simulations, and observed a non-monotonous dependence of the electrophoretic mobility on the bare colloidal charge, whereas at higher charges, where more than half of the ions are co-moving with the colloid, the mobility decreases with increasing bare charge.
Abstract: We study the mobility of a charged colloidal particle in a constant homogeneous electric field by means of computer simulations. The simulation method combines a lattice Boltzmann scheme for the fluid with standard Langevin dynamics for the colloidal particle, which is built up from a net of bonded particles forming the surface of the colloid. The coupling between the two subsystems is introduced via friction forces. In addition explicit counterions, also coupled to the fluid, are present. We observe a non-monotonous dependence of the electrophoretic mobility on the bare colloidal charge. At low surface charge density we observe a linear increase of the mobility with bare charge, whereas at higher charges, where more than half of the ions are co-moving with the colloid, the mobility decreases with increasing bare charge.
TL;DR: In this paper, the authors derived hydrodynamic equations for an isotropic solution of active polar filaments from a microscopic mean-field model of the forces exchanged between motors and filaments.
Abstract: Hydrodynamic equations for an isotropic solution of active polar filaments are derived from a microscopic mean-field model of the forces exchanged between motors and filaments. We find that a spatial dependence of the motor stepping rate along the filament is essential to drive bundle formation. A number of differences arise as compared to hydrodynamics derived (earlier) from a mesoscopic model where relative filament velocities were obtained on the basis of symmetry considerations. Due to the anisotropy of filament diffusion, motors are capable of generating net filament motion relative to the solvent. The effect of this new term on the stability of the homogeneous state is investigated.
TL;DR: In this article, the authors present some recent theory and simulation results addressing the phenomena of colloidal gelation at both high and low volume fractions, in the presence of short-range attractive interactions.
Abstract: We present some recent theory and simulation results addressing the phenomena of colloidal gelation at both high and low volume fractions, in the presence of short-range attractive interactions. We discuss the ability of mode-coupling theory and its adaptations to address situations with strong heterogeneity in density and/or dynamics. We include a discussion of the effect of attractions on the shear-thinning and yield behaviour under flow.
TL;DR: In this article, the authors investigated the solvation of charged, nanometer-sized spherical solutes in water, and the effective, solvent-induced force between two such solutes by constant temperature and pressure Molecular Dynamics simulations of model solutes carrying various charge patterns.
Abstract: The solvation of charged, nanometer-sized spherical solutes in water, and the effective, solvent-induced force between two such solutes are investigated by constant temperature and pressure Molecular Dynamics simulations of model solutes carrying various charge patterns. The results for neutral solutes agree well with earlier findings, and with predictions of simple macroscopic considerations: substantial hydrophobic attraction may be traced back to strong depletion (``drying'') of the solvent between the solutes. This hydrophobic attraction is strongly reduced when the solutes are uniformly charged, and the total force becomes repulsive at sufficiently high charge; there is a significant asymmetry between anionic and cationic solute pairs, the latter experiencing a lesser hydrophobic attraction. The situation becomes more complex when the solutes carry discrete (rather than uniform) charge patterns. Due to antagonistic effects of the resulting hydrophilic and hydrophobic ``patches'' on the solvent molecules, water is once more significantly depleted around the solutes, and the effective interaction reverts to being mainly attractive, despite the direct electrostatic repulsion between solutes. Examination of a highly coarse-grained configurational probability density shows that the relative orientation of the two solutes is very different in explicit solvent, compared to the prediction of the crude implicit solvent representation. The present study strongly suggests that a realistic modeling of the charge distribution on the surface of globular proteins, as well as the molecular treatment of water are essential prerequisites for any reliable study of protein aggregation.
TL;DR: In this paper, step strain experiments and dynamic light scattering measurements are perfomed to characterize the dynamic behavior of an o/w droplet microemulsion into which is incorporated a telechelic polymer.
Abstract: Step strain experiments and dynamic light scattering measurements are perfomed to characterize the dynamic behavior of an o/w droplet microemulsion into which is incorporated a telechelic polymer. At sufficient droplet and polymer concentrations, above the percolation threshold, the system is viscoelastic and its dynamic structure factor shows up two steps for the relaxation of concentration fluctuations: the fast one is dominated by the diffusion but the slower one is almost independent of the wave vector. The terminal time of the stress relaxation tR and the slow time of the dynamic structure factor tS are both presumably controlled by the residence time of a sticker in a droplet: consistently, tR and tS are of the same order, they both vanishes at the percolation threshold according to power laws but with different exponents. We discuss these features in terms of deviations at the transition, from the usual mean field description of the dynamics of transient networks.
TL;DR: In this paper, the authors consider simple couplings between the local composition and internal membrane structure, and their influence on transitions between liquid and ''gel'' membrane phases, assuming that the gel transition temperature of the saturated lipid is shifted by the presence of the unsaturated lipid, and that cholesterol acts as an external field on the chain melting transition.
Abstract: In an effort to understand ``rafts'' in biological membranes, we propose phenomenological models for saturated and unsaturated lipid mixtures, and lipid-cholesterol mixtures. We consider simple couplings between the local composition and internal membrane structure, and their influence on transitions between liquid and ``gel'' membrane phases. Assuming that the gel transition temperature of the saturated lipid is shifted by the presence of the unsaturated lipid, and that cholesterol acts as an external field on the chain melting transition, a variety of phase diagrams are obtained. The phase diagrams for binary mixtures of saturated/unsaturated lipids and lipid/cholesterol are in semi-quantitative agreement with the experiments. Our results also apply to regions in the ternary phase diagram of lipid/lipid/cholesterol systems.
TL;DR: In this article, the authors analyzed dielectric relaxation measurements on polypropylene glycol and 1,4-polyisoprene to determine the relative effect that thermal energy and volume have on the temperature dependence of the normal mode relaxation times, and compare this to their effect on the local segmental relaxation times.
Abstract: Published dielectric relaxation measurements on polypropylene glycol and 1,4-polyisoprene are analyzed to determine the relative effect that thermal energy and volume have on the temperature dependence of the normal mode relaxation times, and compare this to their effect on the temperature dependence of the local segmental relaxation times. We find that for both polymers at temperatures well above Tg, both relaxation modes are governed more by thermal energy than by volume, although the latter's contribution is not negligible. Such a result is consistent with an assumption underlying models for polymer viscoelasticity, such as the Rouse and tube models, that the friction coefficient governing motions over large length scales can be identified with the local segmental friction coefficient. We also show that relaxation data for both the segmental and the normal mode superimpose, when expressed as a function of the product of the temperature and the volume, the latter raised to a power. This scaling form arises from an inverse power form for the intermolecular potential. The value of the exponent on the volume for these two polymers indicates a relatively "soft" potential.
TL;DR: In this paper, the collision processes of two crescentic dunes called barchans are systematically studied using a simple computer simulation model, and the simulated processes, coalescence, ejection and reorganization, qualitatively correspond to those observed in a water tank experiment.
Abstract: The collision processes of two crescentic dunes called barchans are systematically studied using a simple computer simulation model. The simulated processes, coalescence, ejection and reorganization, qualitatively correspond to those observed in a water tank experiment. Moreover we found the realized types of collision depend both on the mass ratio and on the lateral distance between barchans under initial conditions. A simple set of differential equations to describe the collision of one-dimensional (1D) dunes is introduced.
TL;DR: In this article, it was shown that the relaxation of a supercooled Brownian system is qualitatively the same as that of a Newtonian system, in particular near the so-called mode-coupling transition temperature.
Abstract: Using Brownian Dynamics computer simulations we show that the relaxation of a supercooled Brownian system is qualitatively the same as that of a Newtonian system. In particular, near the so-called mode-coupling transition temperature, dynamic properties of the Brownian system exhibit the same deviations from power-law behavior as those of the Newtonian one. Thus, similar dynamical events cut off the idealized mode-coupling transition in Brownian and Newtonian systems. We discuss implications of this finding for extended mode-coupling theory. In addition, we point out and discuss the difference between our findings and experimental results, and present an alternative interpretation of some of our simulation data.
TL;DR: In this article, a new description of the binary fluid problem via the lattice Boltzmann method is presented which highlights the use of the moments in constructing two equilibrium distribution functions.
Abstract: A new description of the binary fluid problem via the lattice Boltzmann method is presented which highlights the use of the moments in constructing two equilibrium distribution functions. This offers a number of benefits, including better isotropy, and a more natural route to the inclusion of multiple relaxation times for the binary fluid problem. In addition, the implementation of solid colloidal particles suspended in the binary mixture is addressed, which extends the solid-fluid boundary conditions for mass and momentum to include a single conserved compositional order parameter. A number of simple benchmark problems involving a single particle at or near a fluid-fluid interface are undertaken and show good agreement with available theoretical or numerical results.
Posted Content•
TL;DR: The proposed model of ferroelectric switching in the polar B(1RevTilted) columnar phase shows that the main factor discriminating the type of switching is the width of the column cross-section.
Abstract: The behavior of polar columnar phases made of bent shaped molecules (B_1Rev and B_1RevTilted) was studied under applied electric field. There are two competing mechanisms of switching in polar B_1RevTilted columnar phase: the collective rotation around the long molecular axis and the collective rotation around the tilt cone. Respectively monostable and bistable optical switching is observed for antiferroelectric B_1RevTilted phase. The main factor discriminating the type of the switching is a width of the column cross-section.
Posted Content•
TL;DR: In this paper, the existence of a new dynamical instability of a granular mixture under oscillating horizontal shear, which leads to the formation of a striped pattern where the components are segregated, is investigated.
Abstract: Dynamical instabilities in fluid mechanics are responsible of a variety of important common phenomena, such as waves on the sea surface or Taylor vorteces in Couette flow. In granular media dynamical instabilities has just begun to be discovered. Here we show by means of molecular dynamics simulation the existence of a new dynamical instability of a granular mixture under oscillating horizontal shear, which leads to the formation of a striped pattern where the components are segregated. We investigate the properties of such a Kelvin-Helmholtz like instability and show how it is connected to pattern formation in granular flow and segregation.