Showing papers in "BMC Oral Health in 2019"
TL;DR: The noticeable properties and versatility make lithium disilicate and zirconia materials of choice for modern prosthetic dentistry, requiring high esthetic and mechanical performances combined with a minimal invasive approach, so that the utilization of such metal-free ceramics has become more and more widespread over time.
Abstract: The introduction of the new generation of particle-filled and high strength ceramics, hybrid composites and technopolymers in the last decade has offered an extensive palette of dental materials broadening the clinical indications in fixed prosthodontics, in the light of minimally invasive dentistry dictates. Moreover, last years have seen a dramatic increase in the patients’ demand for non-metallic materials, sometimes induced by metal-phobia or alleged allergies. Therefore, the attention of scientific research has been progressively focusing on such materials, particularly on lithium disilicate and zirconia, in order to shed light on properties, indications and limitations of the new protagonists of the prosthetic scene. This article is aimed at providing a narrative review regarding the state-of-the-art in the field of these popular ceramic materials, as to their physical-chemical, mechanical and optical properties, as well as to the proper dental applications, by means of scientific literature analysis and with reference to the authors’ clinical experience. A huge amount of data, sometimes conflicting, is available today. Both in vitro and in vivo studies pointed out the outstanding peculiarities of lithium disilicate and zirconia: unparalleled optical and esthetic properties, together with high biocompatibility, high mechanical resistance, reduced thickness and favorable wear behavior have been increasingly orientating the clinicians’ choice toward such ceramics. The noticeable properties and versatility make lithium disilicate and zirconia materials of choice for modern prosthetic dentistry, requiring high esthetic and mechanical performances combined with a minimal invasive approach, so that the utilization of such metal-free ceramics has become more and more widespread over time.
166 citations
TL;DR: Virtual and augmented reality have contributed to the planning of maxillofacial procedures and surgery training and few articles highlighted the importance of this technology in improving the quality of patients’ care.
Abstract: Virtual reality is the science of creating a virtual environment for the assessment of various anatomical regions of the body for the diagnosis, planning and surgical training. Augmented reality is the superimposition of a 3D real environment specific to individual patient onto the surgical filed using semi-transparent glasses to augment the virtual scene.. The aim of this study is to provide an over view of the literature on the application of virtual and augmented reality in oral & maxillofacial surgery. We reviewed the literature and the existing database using Ovid MEDLINE search, Cochran Library and PubMed. All the studies in the English literature in the last 10 years, from 2009 to 2019 were included. We identified 101 articles related the broad application of virtual reality in oral & maxillofacial surgery. These included the following: Eight systematic reviews, 4 expert reviews, 9 case reports, 5 retrospective surveys, 2 historical perspectives, 13 manuscripts on virtual education and training, 5 on haptic technology, 4 on augmented reality, 10 on image fusion, 41 articles on the prediction planning for orthognathic surgery and maxillofacial reconstruction. Dental implantology and orthognathic surgery are the most frequent applications of virtual reality and augmented reality. Virtual planning improved the accuracy of inserting dental implants using either a statistic guidance or dynamic navigation. In orthognathic surgery, prediction planning and intraoperative navigation are the main applications of virtual reality. Virtual reality has been utilised to improve the delivery of education and the quality of training in oral & maxillofacial surgery by creating a virtual environment of the surgical procedure. Haptic feedback provided an additional immersive reality to improve manual dexterity and improve clinical training. Virtual and augmented reality have contributed to the planning of maxillofacial procedures and surgery training. Few articles highlighted the importance of this technology in improving the quality of patients’ care. There are limited prospective randomized studies comparing the impact of virtual reality with the standard methods in delivering oral surgery education.
128 citations
TL;DR: This in vitro study assesses the accuracy of 5 different IOSs in the impressions of single and multiple implants, and finds a significant difference in trueness was found between the contexts.
Abstract: Until now, a few studies have addressed the accuracy of intraoral scanners (IOSs) in implantology. Hence, the aim of this in vitro study was to assess the accuracy of 5 different IOSs in the impressions of single and multiple implants, and to compare them. Plaster models were prepared, representative of a partially edentulous maxilla (PEM) to be restored with a single crown (SC) and a partial prosthesis (PP), and a totally edentulous maxilla (TEM) to be restored with a full-arch (FA). These models were scanned with a desktop scanner, to capture reference models (RMs), and with 5 IOSs (CS 3600®, Trios3®, Omnicam®, DWIO®, Emerald®); 10 scans were taken for each model, using each IOS. All IOS datasets were loaded into a reverse-engineering software where they were superimposed on the corresponding RMs, to evaluate trueness, and superimposed on each other within groups, to determine precision. A statistical analysis was performed. In the SC, CS 3600® had the best trueness (15.2 ± 0.8 μm), followed by Trios3® (22.3 ± 0.5 μm), DWIO® (27.8 ± 3.2 μm), Omnicam® (28.4 ± 4.5 μm), Emerald® (43.1 ± 11.5 μm). In the PP, CS 3600® had the best trueness (23 ± 1.1 μm), followed by Trios3® (28.5 ± 0.5 μm), Omnicam® (38.1 ± 8.8 μm), Emerald® (49.3 ± 5.5 μm), DWIO® (49.8 ± 5 μm). In the FA, CS 3600® had the best trueness (44.9 ± 8.9 μm), followed by Trios3® (46.3 ± 4.9 μm), Emerald® (66.3 ± 5.6 μm), Omnicam® (70.4 ± 11.9 μm), DWIO® (92.1 ± 24.1 μm). Significant differences were found between the IOSs; a significant difference in trueness was found between the contexts (SC vs. PP vs. FA). In the SC, CS 3600® had the best precision (11.3 ± 1.1 μm), followed by Trios3® (15.2 ± 0.8 μm), DWIO® (27.1 ± 10.7 μm), Omnicam® (30.6 ± 3.3 μm), Emerald® (32.8 ± 10.7 μm). In the PP, CS 3600® had the best precision (17 ± 2.3 μm), followed by Trios3® (21 ± 1.9 μm), Emerald® (29.9 ± 8.9 μm), DWIO® (34.8 ± 10.8 μm), Omnicam® (43.2 ± 9.4 μm). In the FA, Trios3® had the best precision (35.6 ± 3.4 μm), followed by CS 3600® (35.7 ± 4.3 μm), Emerald® (61.5 ± 18.1 μm), Omnicam® (89.3 ± 14 μm), DWIO® (111 ± 24.8 μm). Significant differences were found between the IOSs; a significant difference in precision was found between the contexts (SC vs. PP vs. FA). The IOSs showed significant differences between them, both in trueness and in precision. The mathematical error increased in the transition from SC to PP up to FA, both in trueness than in precision.
117 citations
TL;DR: Both clear aligners and braces were effective in treating malocclusion andClear aligners had advantage in segmented movement of teeth and shortened treatment duration, but were not as effective as braces in producing adequate occlusal contacts, controlling teeth torque, and retention.
Abstract: Align technology has developed greatly over past few years. Patients tended to prefer clear aligners over conventional brackets because of the superior comfort and esthetics, while the effectiveness of clear aligners was still controversial. The aim of this systematic review was to verify whether the treatment effectiveness of clear aligners was similar to the conventional fixed appliances. A comprehensive search of the Pubmed, Web of Science, Embase, Scopus, and Cochrane Central Register of Controlled Clinical Trials Register databases for studies published through to August 20, 2018 was conducted. Comparative clinical studies assessing the effectiveness of clear aligners compared with braces were included. Eight papers were included in this study. Two of the included papers were randomized controlled trials and six were cohort studies. Clear aligners might not be as effective as braces in producing adequate occlusal contacts, controlling teeth torque, increasing transverse width and retention. While no statistically significant difference was found between two groups in Objective Grading System score (WMD = 8.38, 95% CI [− 0.17, 16.93]; P = 0.05). On the other hand, patients treated with clear aligners had a statistically significant shorter treatment duration than with braces (WMD = − 6.31, 95% CI [− 8.37, − 4.24]; P < 0.001). Both clear aligners and braces were effective in treating malocclusion. Clear aligners had advantage in segmented movement of teeth and shortened treatment duration, but were not as effective as braces in producing adequate occlusal contacts, controlling teeth torque, and retention.
97 citations
TL;DR: The caries microbiota was found to be distinct from that of either of the saliva groups (caries-free & caries-active) when bacterial abundance was taken into account, and the presence of these rare taxa could be the difference between health and disease in these children.
Abstract: The main objectives of this study were to describe and compare the microbiota of 1) deep dentinal lesions of deciduous teeth of children affected with severe early childhood caries (S-ECC) and 2) the unstimulated saliva of these children and 3) the unstimulated saliva of caries-free children, and to compare microbiota compositional differences and diversity of taxa in these sampled sites. Children with S-ECC and without S-ECC were recruited. The saliva of all children with and without S-ECC was sampled along with the deep dentinal microbiota from children affected by S-ECC. The salivary microbiota of children affected by S-ECC (n = 68) was compared to that of caries-free children (n = 70), by Illumina MiSeq sequencing of 16S rRNA amplicons. Finally, the caries microbiota of deep dentinal lesions of those children with S-ECC was investigated. Using two beta diversity metrics (Bray Curtis dissimilarity and UniFrac distance), the caries microbiota was found to be distinct from that of either of the saliva groups (caries-free & caries-active) when bacterial abundance was taken into account. However, when the comparison was made by measuring only presence and absence of bacterial taxa, all three microbiota types separated. While the alpha diversity of the caries microbiota was lowest, the diversity difference between the caries samples and saliva samples was statistically significant (p < 0.001). The major phyla of the caries active dentinal microbiota were Firmicutes (median abundance value 33.5%) and Bacteroidetes (23.2%), with Neisseria (10.3%) being the most abundant genus, followed by Prevotella (10%). The caries-active salivary microbiota was dominated by Proteobacteria (median abundance value 38.2%) and Bacteroidetes (27.8%) with the most abundant genus being Neisseria (16.3%), followed by Porphyromonas (9.5%). Caries microbiota samples were characterized by high relative abundance of Streptococcus mutans, Prevotella spp., Bifidobacterium and Scardovia spp. Distinct differences between the caries microbiota and saliva microbiota were identified, with separation of both salivary groups (caries-active and caries-free) whereby rare taxa were highlighted. While the caries microbiota was less diverse than the salivary microbiota, the presence of these rare taxa could be the difference between health and disease in these children.
85 citations
TL;DR: Wide variations in the root canal morphology exist among Malaysians and CBCT is a clinically useful tool in the identification of external and internal morphological variations inThe human teeth.
Abstract: To determine the root canal morphology of human permanent maxillary and mandibular teeth in a Malaysian subpopulation using cone-beam computed tomography (CBCT). A total of 208 CBCT images were examined retrospectively. Prevalence of an extra root/canal and internal morphology based on Vertucci’s classification were observed in human maxillary and mandibular permanent teeth. Variations in the external and internal morphology were compared in relation to gender and tooth side (left vs right) using Pearson Chi-square and Fisher’s exact tests with significance level set at p < 0.05. In the maxillary arch, the prevalence of three canals were observed in 0.3% of first premolars and two canals in 46.5% of second premolars. Males displayed significantly higher prevalence of two canals in maxillary second premolars than females (p < 0.05). The prevalence of a second mesiobuccal canal in maxillary first and second molars were 36.3 and 8.5%, respectively. Males displayed significantly higher prevalence of a second mesiobuccal canal in maxillary second molars than females (p < 0.05). The prevalence of a second palatal canal in maxillary first and second molars were 0.9 and 0.6%, respectively. In the mandibular arch, the prevalence of two canals were observed in 5.1% of central incisors, 12.3% of lateral incisors, 6.1% of canines, 18.7% of first premolars and 0.5% of second premolars. The prevalence of a middle mesial canal, second distal canal and extra root (radix entomolaris) were detected in 1.9, 19.5 and 21.4% of mandibular first molars, respectively. The prevalence of a C-shaped canal was observed in 48.7% of mandibular second molars. Females displayed significantly higher prevalence of a C-shaped canal in the right mandibular second molars than males (p < 0.05). No other statistically significant differences in root anatomy and root canal morphology were observed in relation to gender and tooth side. Wide variations in the root canal morphology exist among Malaysians. CBCT is a clinically useful tool in the identification of external and internal morphological variations in the human teeth.
81 citations
TL;DR: Systematic reviews consistently supported SDF’s effectiveness for arresting coronal caries in the primary dentition and arresting and preventing root carie in older adults for all comparators and high overlap and heterogeneity precluded meta-analysis.
Abstract: This umbrella review comprehensively appraised evidence for silver diamine fluoride (SDF) to arrest and prevent root and coronal caries by summarizing systematic reviews. Adverse events were explored. Following Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines, PubMed, Embase, Cochrane Library, PROSPERO register and Joanna Briggs Institute Database of Systematic Reviews were searched for systematic reviews investigating SDF for caries prevention or arrest (1970–2018) without language restrictions. Systematic reviews were selected, data extracted, and risk of bias assessed using ROBIS by two independent reviewers, in duplicate. Corrected covered area was calculated to quantify studies’ overlap across reviews. Eleven systematic reviews were included; four focussing on SDF for root caries in adults and seven on coronal caries in children. These cited 30 studies (4 root caries; 26 coronal caries) appearing 63 times. Five systematic reviews were of “low”, one “unclear” and five “high” risk of bias. Overlap of studies was very high (50% root caries; 17% coronal caries). High overlap and heterogeneity, mainly comparators and outcome measures, precluded meta-analysis. Results were grouped by aim and outcomes to present an overview of direction and magnitude of effect. SDF had a positive effect on prevention and arrest of coronal and root caries, consistently outperforming comparators (fluoride varnish, Atraumatic Restorative Treatment, placebo). For root caries prevention, the prevented fraction (PF) was 25–71% higher for SDF compared to placebo (two systematic reviews with three studies) and PF = 100–725% for root caries arrest (one systematic review with two studies). For coronal caries prevention, PF = 70–78% (two systematic reviews with two studies) and PF = 55–96% for coronal caries arrest (one systematic review with two studies) with arrest rates of 65–91% (four systematic reviews with six studies). Eight systematic reviews reported adverse events, seven of which reported arrested lesions black staining. Systematic reviews consistently supported SDF’s effectiveness for arresting coronal caries in the primary dentition and arresting and preventing root caries in older adults for all comparators. There is insufficient evidence to draw conclusions on SDF for prevention in primary teeth and prevention and arrest in permanent teeth in children. No serious adverse events were reported.
80 citations
TL;DR: A low number of teeth was associated with low masticatory ability in both males and females and low plasma albumin levels and low BMI in females, and not smoking, maintaining grip strength, preventing cancer, and masticatories ability are important for preventing undernutrition.
Abstract: Low masticatory ability and the resulting decrease in intake of masticable foods can result in undernutrition. The present study investigated the relationship between tooth loss, low masticatory ability, and nutritional indices in the elderly. The data analyzed in this study were retrieved from the baseline data of the 2007 Fujiwara-kyo study, a prospective cohort study of community-dwelling elderly individuals. Subjects included 1591 men and 1543 women, both with a median age of 71 years. The maximum occlusal force was measured as an objective index of masticatory ability. Foods were divided into five groups based on hardness: Group 1 (bananas, etc.), 0.53 kg; Group 2 (boiled rice, etc.), 1.22 kg; Group 3 (raisins, etc.), 2.93 kg; Group 4 (raw carrots, etc.), 4.38 kg; and Group 5 (beef jerky), 6.56 kg. To obtain a subjective index of masticatory ability, a questionnaire-based survey was conducted to determine whether subjects could masticate foods within each group. As nutritional indices, serum albumin levels and body mass index (BMI) data were used. The median number of teeth was 21. The proportion of subjects for whom all five food groups were masticable showed a significant decrease in the number of teeth in both males and females. Logistic regression analysis showed that, after adjustment for confounders, no significant relationships were observed between the number of teeth and the masticatory ability with nutritional indices in males. In females, a maximum occlusal force of 100 to 300 N (OR = 1.65; 95% CI = 1.06–2.55) or less than 100 N (OR = 1.95; 95% CI = 1.15–3.31) showed a significant correlation with serum albumin levels below 4.4 g/dL (reference: 500 N or more). In addition, the masticability of all five food groups showed a significant correlation with BMI < 21.0 kg/m2 (OR = 0.62; 95% CI = 0.46–0.85) in females. A low number of teeth was associated with low masticatory ability in both males and females. Low masticatory ability was associated with low plasma albumin levels and low BMI in females. Not smoking, maintaining grip strength, preventing cancer, and masticatory ability are important for preventing undernutrition.
66 citations
TL;DR: From the results of this pilot study, it seems that AR can be useful in dental implantology for displaying dynamic navigation systems and specific software applications should further optimize the results.
Abstract: Despite the limited number of articles dedicated to its use, augmented reality (AR) is an emerging technology that has shown to have increasing applications in multiple different medical sectors. These include, but are not limited to, the Maxillo-facial and Dentistry disciplines of medicine. In these medical specialties, the focus of AR technology is to achieve a more visible surgical field during an operation. Currently, this goal is brought about by an accurate display of either static or dynamic diagnostic images via the use of a visor or specific glasses. The objective of this study is to evaluate the feasibility of using a virtual display for dynamic navigation via AR. The secondary outcome is to evaluate if the use of this technology could affect the accuracy of dynamic navigation. Two patients, both needing implant rehabilitation in the upper premolar area, were treated with flapless surgery. Prior to the procedure itself, the position of the implant was virtually planned and placed for each of the patients using their previous scans. This placement preparation contributed to a dynamic navigation system that was displayed on AR glasses. This, in turn, allowed for the use of a computer-aided/image-guided procedure to occur. Dedicated software for surface superimposition was then used to match the planned position of the implant and the real one obtained from the postoperative scan. Accuracies, using this procedure were evaluated by way of measuring the deviation between real and planned positions of the implants. For both surgeries it was possible to proceed using the AR technology as planned. The deviations for the first implant were 0.53 mm at the entry point and 0.50 mm at the apical point and for the second implant were 0.46 mm at the entry point and 0.48 mm at the apical point. The angular deviations were respectively 3.05° and 2.19°. From the results of this pilot study, it seems that AR can be useful in dental implantology for displaying dynamic navigation systems. While this technology did not seem to noticeably affect the accuracy of the procedure, specific software applications should further optimize the results.
60 citations
TL;DR: A fully digital workflow is to be considered more reliable when it come to creating an esthetic mockup: the digital procedure has been shown to be more accurate than the one made manually which is much more operator dependent and it brings an increase to the chance of error, and that could ultimately affect the final result.
Abstract: Aesthetic porcelain veneers proved to be a long-term reliable prosthetic solution, ensuring minimal invasiveness. The use of veneers requires an adhesive cementation technique, so maintaining as much enamel as possible is to ensure lasting success. A diagnostic mock-up is a key tool that allows a preview of the outcome of the aesthetic restoration: it is obtainable both in an analog and digital way. With the recent developments in impression technology and the ever so fast growing use of CAD-CAM technologies it is useful to understand the pros and cons of either one of these techniques (analog and digital) in order to identify the easier and more convenient workflow in aesthetic dentistry. After taking pictures and impressions of the dental arcs of a patient in need of aesthetic rehabilitation, 52 resin models were produced and a digital drawing of the smile was outlined. Both an analog and a digital wax-up were obtained from two of the 52 models: the latter was obtained using digital impressions and a dedicated software. The analog wax-up was then used to produce 25 matrices that have later been used to mould 25 resin mock-ups using a traditional moulding protocol (Control Group - CG). The digital wax-up was used to mill 25 PMMA mock-ups. Each mock-up, both milled and moulded (total 50), was then laid on the other 50 resin models as a digital impression of it was taken. The STL. files of the milled mock-ups were compared with the 3D CAD wax-up made using a specific software. The STL. files of the analog printed mock-ups were compared with the traditional wax-up design. A statistical analysis was carried out to evaluate the difference between the groups. The statistical analysis showed a significant difference (P > 0.01) between the mean value of the distance between the points of the overlapping STL. meshes in GC (0.0468 mm) and in TG (Test Group - TG) (0,0109 mm). The study showed a difference in accuracy between traditional moulded and milled mock-ups compared to their original wax-up. The data analysis reports that the digital method allows for greater accuracy. Within the limitations of this study, a fully digital workflow is to considered more reliable when it come to creating an esthetic mockup: the digital procedure has been shown to be more accurate than the one made manually which is much more operator dependent and it brings an increase to the chance of error, and that could ultimately affect the final result.
59 citations
TL;DR: The use of intraoral edentulous jaws scans in combination with the digital relining procedure may allow for fabrication of CD with functional borders within a fully digital workflow.
Abstract: The utilization of intraoral scanning for manufacturing of complete dentures (CD) has been reported recently. However, functional border molding still cannot be supported digitally. A proof-of-concept trial shows two possible pathways to overcome this limitation by integrating a relining procedure into the digital workflow for CD manufacturing. Intraoral scans and additional facial scans were performed with two various scanning systems for the rehabilitation of an edentulous male patient. The obtained raw data was aligned and used for the computer aided design (CAD) of the CD. The virtually constructed dentures were materialized in two various ways, considering rapid manufacturing and digital relining approaches in order to apply functionally molded borders. The use of intraoral edentulous jaws scans in combination with the digital relining procedure may allow for fabrication of CD with functional borders within a fully digital workflow.
TL;DR: Upper molar distalization with orthodontic aligners guarantee an excellent control of the vertical dimension representing an ideal solution for the treatment of hyperdivergent or openbite subjects.
Abstract: A common strategy in the non-extraction treatment of Class II molar relationship is maxillary molar distalization, which could increase lower face height and cause clockwise mandibular rotation. The aim of this retrospective study was to analyse the effects on vertical dentoskeletal dimension of young adults treated with sequential distalization with orthodontic aligners. Lateral cephalometric radiographs of 10 subjects (8 females 2 males; mean age 22.7 ± 5.3 years) treated with upper molars sequential distalization with orthodontic aligners (Invisalign, Align Technology, San Jose, California, USA) were analyzed. No statistically significant difference was observed for the primary outcome SN-GoGn between T0 and T1 and it was recorded a mean variation of 0.1 ± 2.0 degrees. Statistically significant differences were found in the linear position of the upper molars (6-PP, 7-PP) the molar class relationship parameter (MR) and the upper incisive inclination (1^PP) with at least p < 0.01. Upper molar distalization with orthodontic aligners guarantee an excellent control of the vertical dimension representing an ideal solution for the treatment of hyperdivergent or openbite subjects. It also allows an excellent control of the incisal torque without loss of anchorage during the orthodontic procedure.
TL;DR: Empdogain could be a promising alternative to MTA and Biodentine in enhancing pulp repair capacity following dental pulp injury and may score better than Ca(OH)2.
Abstract: Vital pulp therapy preserves and maintains the integrity and the health of dental pulp tissue that has been injured by trauma, caries or restorative procedures. The enhancement of cells viability and formation of reparative dentine and new blood vessels are vital determinants of the success of direct pulp capping. Therefore, the aims of this study was to evaluate and compare the in vitro osteogenic, odontogenic and angiogenic effects of mineral trioxide aggregate (MTA), calcium hydroxide [Ca(OH)2], Biodentine and Emdogain on dental pulp stem cells (DPSCs) and examine the effects of the tested materials on cell viability. DPSCs were treated with MTA, Ca(OH)2, Biodentine or Emdogain. Untreated cells were used as control. The cell viability was measured by MTT assay on day 3. Real-Time PCR with SYBR green was used to quantify the gene expression levels of osteogenic markers (alkaline phosphatase and osteopontin), odontogenic marker (dentin sialophosphoprotein) and angiogenic factor (vascular endothelial growth factor) on day 7 and day 14. All capping materials showed variable cytotoxicity against DPSCs (77% for Emdogain, 53% for MTA, 26% for Biodentine and 16% for Ca(OH)2 compared to control (P value < 0.0001). Osteopontin (OPN) and dentin sialophosphoprotein (DSPP) gene expression was increased by all four materials. However, alkaline phosphatase (ALP) was upregulated by all materials except Emdogain. Vascular endothelial growth factor (VEGF) expression was upregulated by all four tested materials except Ca(OH)2. Our results suggest MTA, Biodentine and Emdogain exhibit similar attributes and may score better than Ca(OH)2. Emdogain could be a promising alternative to MTA and Biodentine in enhancing pulp repair capacity following dental pulp injury. However, further future research is required to assess the clinical outcomes and compare it with the in vitro findings.
TL;DR: A new understanding of oral health knowledge, behavior and status among dental and medical students is provided, which may help to promote the reform of Oral health education and establish a model for clinicians and dentists to work together for improving oral health.
Abstract: It is widely accepted that oral health plays an important role in overall health. Both dental and medical students are expected to possess good oral health awareness and work together for public oral health promotion especially in developing countries like China. The aim of this study was to assess the oral health knowledge, behavior and status of dental and medical undergraduate students in the first (fresh) and third year (before specialized courses) study. A self-administered structured questionnaire with 13 questions was designed based on oral health knowledge, behavior and status and a cross-sectional study was conducted among the 1st, 3rd year dental students (1DS, 3DS) and medical students (1MS, 3MS) of Sichuan University in Chengdu, China, in the period of September–December 2017. The data was analyzed by chi-square test using IBM SPSS Statistics v. 21.0. The oral health behavior, consciousness and status of the 1st, 3rd year medical and dental students were not optimistic. Dental freshmen were slightly superior to the medical ones in terms of the brushing methods and the awareness of oral disease-systemic disease relationship. The junior dental students showed highly significant improvement than their counterparts, mainly in the items about frequency of brushing teeth, brushing methods of vertical scrub or Bass technique (66.3%), usage of floss or mouth wash (49.7%), causes of caries, periodontal diseases and system diseases (56.9–83.4%). The rates mentioned above were 36.1, 15.8%, 26.7–43.6% among 3MS, respectively. In terms of oral health status, significant differences were only observed in junior students. The prevalence rates of bad breath, gum bleeding, and tooth discoloration among 3DS were obviously lower than those of 3MS. However, only a total of 17.2% junior students had a good oral health, including 23.8% dental students and 11.4% medical students. Our study provided a new understanding of oral health knowledge, behavior and status among dental and medical students, which may help to promote the reform of oral health education and establish a model for clinicians and dentists to work together for improving oral health.
TL;DR: On the base of literature the current development is still insufficient for full validation process, however independent sources of customized software for augmented reality seems promising to help routinely procedures, complicate or specific interventions, education and learning.
Abstract: The aim of the present systematic review was to screen the literature and to describe current applications of augmented reality. The protocol design was structured according to PRISMA-P guidelines and registered in PROSPERO. A review of the following databases was carried out: Medline, Ovid, Embase, Cochrane Library, Google Scholar and the Gray literature. Data was extracted, summarized and collected for qualitative analysis and evaluated for individual risk of bias (R.O.B.) assessment, by two independent examiners. Collected data included: year of publishing, journal with reviewing system and impact factor, study design, sample size, target of the study, hardware(s) and software(s) used or custom developed, primary outcomes, field of interest and quantification of the displacement error and timing measurements, when available. Qualitative evidence synthesis refers to SPIDER. From a primary research of 17,652 articles, 33 were considered in the review for qualitative synthesis. 16 among selected articles were eligible for quantitative synthesis of heterogenous data, 12 out of 13 judged the precision at least as acceptable, while 3 out of 6 described an increase in operation timing of about 1 h. 60% (n = 20) of selected studies refers to a camera-display augmented reality system while 21% (n = 7) refers to a head-mounted system. The software proposed in the articles were self-developed by 7 authors while the majority proposed commercially available ones. The applications proposed for augmented reality are: Oral and maxillo-facial surgery (OMS) in 21 studies, restorative dentistry in 5 studies, educational purposes in 4 studies and orthodontics in 1 study. The majority of the studies were carried on phantoms (51%) and those on patients were 11 (33%). On the base of literature the current development is still insufficient for full validation process, however independent sources of customized software for augmented reality seems promising to help routinely procedures, complicate or specific interventions, education and learning. Oral and maxillofacial area is predominant, the results in precision are promising, while timing is still very controversial since some authors describe longer preparation time when using augmented reality up to 60 min while others describe a reduced operating time of 50/100%. The following systematic review was registered in PROSPERO with RN: CRD42019120058.
TL;DR: It seems to support that periodontal treatment with aPDT + Doxy possesses the best efficacy in lowering HbA1c% of non-smoking CP without severe T2DM complications, however, longer-term well-executed, multi-center trails are required to corroborate the results.
Abstract: Glycemic control is vital in the care of type 2 diabetes mellitus (T2DM) and is significantly associated with the incidence of clinical complications. This Bayesian network analysis was conducted with an aim of evaluating the efficacy of scaling and root planning (SRP) and SRP + adjuvant treatments in improving glycemic control in chronic periodontitis (CP) and T2DM patients, and to guide clinical practice. We searched the Pubmed, Embase, Cochrane Library and Web of Science databases up to 4 May 2018 for randomized controlled trials (RCTs). This was at least three months of the duration of study that involved patients with periodontitis and T2DM without other systemic diseases given SRP. Patients in the control group did not receive treatment or SRP combination with adjuvant therapy. Outcomes were given as HbA1c% and levels fasting plasma glucose (FPG). Random-effects meta-analysis and Bayesian network meta-analysis were conducted to pool RCT data. Cochrane’s risk of bias tool was used to assess the risk of bias. Fourteen RCTs were included. Most were unclear or with high risk of bias. Compared to patients who did not receive treatment, patients who received periodontal treatments showed improved HbA1c% level, including SRP (the mean difference (MD) -0.399 95% CrI 0.088 to 0.79), SRP + antibiotic (MD 0.62, 95% CrI 0.18 to 1.11), SRP + photodynamic therapy (aPDT) + doxycycline (Doxy) (MD 1.082 95% CrI 0.13 to 2.077) and SRP + laser (MD 0.66 95% CrI 0.1037, 1.33). Among the different treatments, SRP + aPDT + Doxy ranked best. Regarding fasting plasma glucose (FPG), SRP did not show advantage over no treatment (MD 4.91 95% CI − 1.95 to 11.78) and SRP with adjuvant treatments were not better than SRP alone (MD -0.28 95% CI -8.66, 8.11). The results of this meta-analysis seem to support that periodontal treatment with aPDT + Doxy possesses the best efficacy in lowering HbA1c% of non-smoking CP without severe T2DM complications. However, longer-term well-executed, multi-center trails are required to corroborate the results.
TL;DR: Within the limitations of this meta-analysis, CPP-ACP exhibited excellent remineralization effects evaluated in clinical research and in vitro, indicating outstanding restoration of form, aesthetics, and function in treating white spot lesions.
Abstract: This systematic review with meta-analyses sought to answer whether casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) provided a remineralizing benefit superior to that of nonintervention or placebo. Following Preferred Reporting Items for Systematic Reviews and Meta-analysis (PRISMA) guidelines, Cochrane databases, PubMed, EmBase, and Ovid up to May 20th, 2019, were scanned, only published in English. Study information extraction and methodological quality assessments were accomplished independently by two reviewers. The “Criteria for judging risk of bias in the ‘Risk of bias’ assessment tool” was used for methodological quality assessment. The continuous data was analyzed by mean difference (MD) or standardized mean difference (SMD) with a 95% confidence interval (CI). Review Manager 5.3 was used for statistical analysis. Outcome variables include quantitative light-induced fluorescence in clinical research, average surface roughness and surface microhardness in vitro. There were significant differences in the quantitative light-induced fluorescence (SMD = − 0.43, 95% CI: [− 0.79, − 0.07], P = 0.02), average surface roughness (SMD = − 8.21, 95% CI: [− 10.37, − 6.04], P < 0.01), Vickers microhardness (SMD = 1.19, 95% CI: [0.72, 1.66], P < 0.01), and Knoop microhardness (SMD = 3.52, 95% CI: [2.68, 4.36], P < 0.01) between the CPP-ACP and control groups or baseline. Within the limitations of this meta-analysis, CPP-ACP exhibited excellent remineralization effects evaluated in clinical research and in vitro, indicating outstanding restoration of form, aesthetics, and function in treating white spot lesions.
TL;DR: The ultraconservative approach (combining nano-HA 0.15% and SHMP) and FS may be considered a minimal intervention in dentistry to seal demineralized enamel pits and fissures.
Abstract: The management of noncavitated caries lesions before sealant therapy is a clinical challenge when the tooth needs sealant application. Sealing noncavitated carious lesions in pits and fissures may lead to failure of the fissure sealant (FS) due to incomplete sealing. Therefore the use of remineralizing agents such as nanoparticles has been suggested. This study investigated the ability of hydroxyapatite nanoparticles (nano-HA) to remineralize enamel, and their effect on sealant microleakage and shear bond strength (SBS). A total of 192 third molars were demineralized and pretreated with two concentrations of nano-HA with and without sodium hexametaphosphate (SHMP), followed by phosphoric acid etching and resin FS application. The study groups were 1) etching + FS, 2) etching + nano-HA 0.15% + FS, 3) etching + nano-HA 0.03% + FS, 4) etching + mixture of nano-HA 0.15% and SHMP 0.05% + FS, 5) etching + mixture of nano-HA 0.03% + SHMP 0.01% + FS. The laboratory tests included microleakage in 50 teeth, scanning electron microscopy (SEM) evaluation in 10 samples, and SBS in 100 samples. Enamel remineralization changes were evaluated in 32 teeth with energy-dispersive X-ray spectroscopy (EDS) and field emission scanning electron microscope (FESEM). Nano-HA enhanced the SBS to remineralized enamel in a large percentage of nanoparticles. Mean SBS in group 2 was significantly greater than in groups 1, 3 and 4 (all P 0.05). SEM images showed that SHMP did not affect sealant penetration into the deeper parts of fissures. FESEM images showed that adding SHMP led to increased nanoparticle dispersal on the tooth surface and less cluster formation. The ultraconservative approach (combining nano-HA 0.15% and SHMP) and FS may be considered a minimal intervention in dentistry to seal demineralized enamel pits and fissures.
TL;DR: The maxilla was repositioned in almost the same manner as in the VSP plan, and the maxillary position remained stable for a year, and customized materials produced based on the VS were applied in actual OGS.
Abstract: Many reports have been published on orthognathic surgery (OGS) using computer-aided surgical simulation (CASS). The purpose of this study was to evaluate the accuracy of the maxillary repositioning and the stability of the maxilla in patients who underwent OGS using a newly developed CASS program, a customized osteotomy guide, and a customized miniplate. Thirteen patients who underwent OGS from 2015 to 2017 were included. All patients underwent a bimaxillary operation. First, a skull-dentition hybrid 3D image was rendered by merging the cone beam computed tomography (CBCT) images with the dentition scan file. After virtual surgery (VS) using the FaceGide® program, patient-customized osteotomy guides and miniplates were then fabricated and used in the actual operation. To compare the VS with the actual surgery and postoperative skeletal changes, each reference point marked on the image was compared before the operation (T0) and three days (T1), four months (T2), and a year (T3) after the operation, and with the VS (Tv). The differences between ΔTv (Tv-T0) and ΔT1 (T1-T0) were statistically compared using tooth-based reference points. The superimposed images of Tv and T1 were also investigated at eight bone-based reference points. The differences between the reference points of the bone surface were examined to evaluate the stability of the miniplate on the maxilla over time. None of the patients experienced complications. There were no significant differences between the reference points based on the cusp tip between ΔTv and ΔT1 (p > 0.01). Additionally, there were no significant differences between the Tv and T1 values of the bone surface (p > 0.01). The mean difference in the bone surface between Tv and T1 was 1.01 ± 0.3 mm. Regarding the stability of the miniplate, there were no significant differences between the groups. The difference in the bone surface between T1 and T3 was − 0.37 ± 0.29 mm. VS was performed using the FaceGide® program, and customized materials produced based on the VS were applied in actual OGS. The maxilla was repositioned in almost the same manner as in the VSP plan, and the maxillary position remained stable for a year.
TL;DR: The effect of high household income on the amount of bone loss can be powerful to the degree that high house income can influence outcomes even for individuals who had higher risks of developing the disease.
Abstract: Although several studies assessed the prevalence of alveolar bone loss, the association with several risk factors has not been fully investigated. The aim of this article is to measure the prevalence of periodontitis by calculating the mean alveolar bone loss/level of posterior teeth using bitewing radiographs among the patients enrolled in the clinics at Harvard School of Dental Medicine and address risk factors associated with the disease. One thousand one hundred thirty-one patients were selected for radiographic analysis to calculate the mean alveolar bone loss/level by measuring the distance between the cementoenamel junction and the alveolar bone crest on the mesial and distal surfaces of posterior teeth. Linear regression with Multi-level mixed-effect model was used for statistical analysis adjusting for age, sex, race, median household income, and other variables. Mean alveolar bone level of the whole sample was 1.30 mm (±0.006). Overall periodontitis prevalence for the sample was 55.5% (±1.4%). Moderate periodontitis prevalence was 20.7% (±1.2%), while 2.8% (±0.5%) of the whole sample had severe periodontitis. Adjusted mean alveolar bone loss was higher in older age groups, males, Asian race group, ever smokers, and patients with low median household income. The effect of high household income on the amount of bone loss can be powerful to the degree that high household income can influence outcomes even for individuals who had higher risks of developing the disease. Public health professionals and clinicians need to collaborate with policy makers to achieve and sustain high quality of healthcare for everyone.
TL;DR: Strongest evidence related to caries in 12-year-old group were found in frequency of toothbrushing and dental plaque, and in 15-year old group, electric toothbrush, time since the last visit to the dentist and type of dental care (public/private) had a stronger association with dental caries.
Abstract: To assess the prevalence and severity of caries in 12- and 15-year-old schoolchildren, and to analyse the related risk factors. We conducted a cross-sectional study on a random sample of 1843 schoolchildren aged 12 and 15 from Galicia (northwest of Spain). Self-administered questionnaire and dental clinical examination were performed to obtain information about oral health habits, dental caries and oral hygiene. A logistic regression model including dental-caries-related variables was generated for each age group. The respective findings for 12- and 15-years-old were as follows: decayed, missing, filled teeth index both for permanent and temporary dentition (DMFT/dmft) of 0.89 (95% CI, 0.87–0.91) and 1.38 (95% CI, 1.33–1.43), respectively; caries prevalence 39.6% (95% CI, 36.3–42.9) and 51.7% (95% CI, 48.0–55.4), respectively. In the 12-year-old group, individuals who occasionally, never or hardly ever brushed their teeth had higher values of caries (OR = 1.83, 95% CI 1.07–3.15, and OR = 9.14, 95% CI1.63–51.17, respectively). Also, the presence of plaque on more than 1/3 gingival was statistically associated with an increase of caries (OR = 2.03; 95% CI, 1.11–3.70), and living in a rural environment was a risk factor (OR = 1.3; 95% CI,1.02–1.80). In the 15-year-old group, higher caries risk was found when brushing was performed once a day (OR = 1.61; 95% CI,1.03–2.50), and among individuals who visited private clinics (OR = 1.77; 95% CI, 1.17–2.66), while electric toothbrush was associated with a lower caries risk (OR = 0.50; 95% CI, 0.29–0.86). This study revealed that risk factors of dental caries showed differences in schoolchildren of 12- and 15-year-old. Strongest evidence related to caries in 12-year-old group were found in frequency of toothbrushing and dental plaque. In 15-year old group, electric toothbrush, time since the last visit to the dentist and type of dental care (public/private) had a stronger association with dental caries. Caries prevalence and mean DMFT/dmft increased from 12- to 15-year-old, in spite of improvement in oral hygiene at the age of 15.
TL;DR: Non-dental professionals can promote maternal oral health by providing oral health education, risk assessment and referrals and combining these interventions could provide a sustained improvement in oral health outcomes for children although current evidence is weak.
Abstract: Early childhood caries is a common chronic childhood disease and maternal oral health is a risk factor. Improving the oral health behaviours of pregnant women/young mothers can positively influence the oral health of children and reduce their caries risk. Such preventative strategies have been undertaken by non-dental professionals producing mixed results encompassing various interventions across the perinatal period. However, no comprehensive review of these studies has been undertaken. The aim of this review was to assess the effectiveness of maternal oral health programs undertaken during the antenatal and/or postnatal period by non-dental health professionals to reduce early childhood caries. A systematic search of five databases was undertaken using key search terms. Studies were included if they (a) involved quantitative study designs with a control; (b) were published in English; (c) reported on interventions delivered by non-dental professionals (d) delivered the intervention to expectant mothers or mothers with young infants up to 24 months; (e) measured outcomes when the child was under 5 years; (f) measured changes in oral health outcomes of children clinically and oral health behaviours of mothers or children. No restrictions were placed on the study quality and setting. Nine studies met the inclusion criteria and involved interventions delivered by diverse non-dental professionals across the antenatal (n = 1), postnatal (n = 6) and perinatal period (n = 2). Most studies were of low methodological quality (n = 6). The interventions focussed on oral health education (n = 8), dental referrals (n = 3) and oral health assessments (n = 1). Interventions conducted in either the postnatal or antenatal periods showed meaningful improvements in children’s clinical and mother’s behavioural oral health outcomes. The outcomes appear to be sustained when a suite of interventions were used along with referral reminders. There were mixed results from interventions across the perinatal period. Non-dental professionals can promote maternal oral health by providing oral health education, risk assessment and referrals. Combining these interventions could provide a sustained improvement in oral health outcomes for children although current evidence is weak. More high-quality studies are needed to confirm these findings and determine whether the antenatal and/or postnatal period is best suited to deliver these interventions.
TL;DR: Oral health content information and results of dental examiner reliability statistics for key intraoral assessments conducted by dentists during 2011–2014 indicate a high level of data quality and substantial examiner reliability for tooth count and dentition; reliability for periodontal disease was at least moderate.
Abstract: Following implementation in 2009–2010 to the oral health component for the National Health and Nutrition Examination Survey (NHANES), a full-mouth periodontal examination was continued during 2011–2014. Additionally, a comprehensive dental caries assessment was re-introduced in 2011 after a 6-year absence from NHANES. This report provides oral health content information and results of dental examiner reliability statistics for key intraoral assessments conducted by dentists during 2011–2014. During the 2011–2014 NHANES 17,463 persons age 1 and older representing the US civilian, non-institutionalized population received an oral health examination. From this group, 387 individuals underwent a repeat examination conducted by the survey reference examiner. A combination of examiner training and calibration, electronic data capture, and ongoing performance evaluation with statistical monitoring was used to ensure conformance with NHANES protocols and data comparability to prior data collection periods. During 2011–2014, the Kappa statistics for the tooth count assessment ranged from 0.96 to 1.00, for untreated dental caries Kappa scores were 0.93 to 1.00. The overall Kappa statistics for identifying combined moderate-severe periodontitis using the CDC/AAP case definition was 0.66 and 0.69 with percent agreement of 83 to 85% during 2011–2014. When evaluating inter-examiner agreement using information collected from 3 periodontal sites for comparability to the NHANES 2003–04 periodontal examination protocols, Kappa scores for combined moderate-severe periodontitis was 0.65 and 0.80 during 2011–2014. For total mean attachment loss and pocket depth across all 6 periodontal sites, the inter-class coefficients (ICCs) ranged from 0.80–0.90 and 0.79–0.86 respectively. Site-specific mean attachment loss ICCs were generally higher for the 4 interproximal measurements compared to the 2 mid-site probing measurements and this observation was similar in 2009–2010. During 2011–2014, results overall indicate a high level of data quality and substantial examiner reliability for tooth count and dentition; reliability for periodontal disease, across various assessments, was at least moderate. When comparing the 2011–2014 examiner performance to findings from 2003 to 2004, comparable concordance between the examiners and the reference examiner exists.
TL;DR: These well-defined 3D scaffolds consisting of medical-grade materials optimized for cell attachment and cell growth hold the key to a promising new approach in GBR in oral and maxillofacial surgery.
Abstract: The spectrum of indications for the use of membranes and scaffolds in the field of oral and maxillofacial surgery includes, amongst others, guided bone regeneration (GBR). Currently available membrane systems face certain disadvantages such as difficult clinical handling, inconsistent degradation, undirected cell growth and a lack of stability that often complicate their application. Therefore, new membranes which can overcome these issues are of great interest in this field. In this pilot study, we investigated polycaprolactone (PCL) scaffolds intended to enhance oral wound healing by means of melt electrospinning writing (MEW), which allowed for three-dimensional (3D) printing of micron scale fibers and very exact fiber placement. A singular set of box-shaped scaffolds of different sizes consisting of medical-grade PCL was examined and the scaffolds’ morphology was evaluated via scanning electron microscopy (SEM). Each prototype sample with box sizes of 225 μm, 300 μm, 375 μm, 450 μm and 500 μm was assessed for cytotoxicity and cell growth by seeding each scaffold with human osteoblast-like cell line MG63. All scaffolds demonstrated good cytocompatibility according to cell viability, protein concentration, and cell number. SEM analysis revealed an exact fiber placement of the MEW scaffolds and the growth of viable MG63 cells on them. For the examined box-shaped scaffolds with pore sizes between 225 μm and 500 μm, a preferred box size for initial osteoblast attachment could not be found. These well-defined 3D scaffolds consisting of medical-grade materials optimized for cell attachment and cell growth hold the key to a promising new approach in GBR in oral and maxillofacial surgery.
TL;DR: This retrospective study provides a population-based, clinical-epidemiological description of the orofacial cleft phenomenon and its social and economic impact is worthy of further study.
Abstract: To evaluate the relationship between gender, ethnicity/citizenship, clinical phenotype, total prevalence, and the various congenital malformations associated with oral clefts (OC) in Italy across the period 2001–2014. A retrospective analysis (2001–2014) was conducted based on the National Congenital Malformation Registries network of Italy (Emilia-Romagna Registry of Birth Defects [IMER] and Registro Toscano Difetti Congeniti [RTDC]), which were analyzed to investigate time trends, geographical/ethnic clusters, topography, sex ratio, and associated congenital anomalies of OC phenotypes. Among 739 registered cases, 29.8% were syndromic or had multi-malformed associated anomalies, compared with 70.2% having isolated orofacial cleft. Cleft lip (CL) was observed in 22%, cleft palate (CP) in 40%, and cleft lip and palate (CLP) in 38% of live births, stillbirths, and terminations of pregnancy for fetal anomaly cases. Other associated conditions were major anomalies of cardiovascular defects (39%), followed by defects of the limbs (28%), neuroectodermal defects (23%), and urogenital malformations (10%). Male-to-female sex ratio was 1:1.14 in CP, 1.22:1 in CL, and 1.9:1 in CLP. Foreigners were represented by 29% from Southeast Asia, 25% from Balkans, 25% from North-Central Africa, 9% from the East, 7% from Western Europe, and 5% from South America. Total prevalence of OC cases ranged from 0.9 (RTDC) to 1.1 (IMER) of 1000 births. This retrospective study provides a population-based, clinical-epidemiological description of the orofacial cleft phenomenon. As a relatively frequent congenital malformation, its social and economic impact is worthy of further study. These abnormalities can cause significant problems that may be solved or minimized by early diagnosis and treatment.
TL;DR: Odontogenic infections with fulminant progression should be treated based on clinical and imaging data with immediate surgical incision and drainage including elimination of odontogenic foci as well as intensified intra- and postoperative irrigation.
Abstract: More than 90% of all infections in the head and neck region can be traced back to an odontogenic origin. In rare cases they can lead to sepsis, which may pose a vital threat to the patient. The purpose of this study was to analyse characteristics concerning etiology and progress of severe odontogenic infections with a fulminant development. All patients with odontogenic infections requiring hospital admission were included in a retrospective analysis conducted from 02/2012 to 09/2017. Of 483 patients 16 patients (13 male, 3 female) showed severe exacerbation with septic progress. The average age was 52.8 years. All patients underwent at least one surgical procedure that involved an extraoral incision and drainage as well as high volume irrigation intraoperatively. At least one revision was required for four of the patients. Three patients showed an exceedingly severe disease progression with multiorgan dysfunction syndrome (MODS) and circulatory arrest. Antibiotic treatment was adjusted according to the results of an antibiogram and resistogram. Irrigation with saline was done several times a day. Sixteen patients showed odontogenic infections that spread over multiple maxillo-facial and cervical regions accompanied by septic laboratory signs. All these patients needed intensive care and a tracheostomy. The hospitalization period was 27.8 days on average. In 16 cases risk factors for the development of odontogenic abscesses like diabetes mellitus, obesity, chronic alcohol and nicotine abuse, rheumatism and poor oral hygiene were present. Intraoperative swabs showed a typical polymicrobial aerobic and anaerobic spectrum of oral bacteria, especially anaerobes and streptococci, mainly Streptocococcus viridans. Odontogenic infections with fulminant progression should be treated based on clinical and imaging data with immediate surgical incision and drainage including elimination of odontogenic foci as well as intensified intra- and postoperative irrigation. If needed, repeat imaging followed by further incisions should be performed. Immediate antibiotic treatment adapted to the antibiogram is of utmost importance. A combination of tazobactam and piperacillin has proven to be a good first choice and can be recommended for abscesses that spread over multiple levels with initial signs of severe infections.
TL;DR: The prediction models for total and severe periodontitis proved to be feasible and accurate, resulting in easily applicable screening tools, intended for a non-dental setting.
Abstract: Since periodontitis is bi-directionally associated with several systemic diseases, such as diabetes mellitus and cardiovascular diseases, it is important for medical professionals in a non-dental setting to be able examine their patients for symptoms of periodontitis, and urge them to visit a dentist if necessary. However, they often lack the time, knowledge and resources to do so. We aim to develop and assess “quick and easy” screening tools for periodontitis, based on self-reported oral health (SROH), demographics and/or salivary biomarkers, intended for use by medical professionals in a non-dental setting. Consecutive, new patients from our outpatient clinic were recruited. A SROH questionnaire (8 questions) was conducted, followed by a 30 s oral rinse sampling protocol. A complete clinical periodontal examination provided the golden standard periodontitis classification: no/mild, moderate or severe periodontitis. Total periodontitis was defined as having either moderate or severe. Albumin and matrix metalloproteinase-8 concentrations, and chitinase and protease activities were measured in the oral rinses. Binary logistic regression analyses with backward elimination were used to create prediction models for both total and severe periodontitis. Model 1 included SROH, demographics and biomarkers. The biomarkers were omitted in the analysis for model 2, while model 3 only included the SROH questionnaire. The area under the receiver operating characteristic curves (AUROCC) provided the accuracy of each model. The regression equations were used to create scoring algorithms, composed of the remaining predictors, each with its own weight. Of the 156 patients participating in this study, 67% were classified with total periodontitis and 33% had severe periodontitis. The models for total periodontitis achieved an AUROCC of 0.91 for model 1, 0.88 for model 2 and 0.81 for model 3. For severe periodontitis, this was 0.89 for model 1, 0.82 for model 2 and 0.78 for model 3. The algorithm for total periodontitis (model 2), which we consider valid for the Dutch population, was applied to create a freely accessible, web-based screening tool. The prediction models for total and severe periodontitis proved to be feasible and accurate, resulting in easily applicable screening tools, intended for a non-dental setting.
TL;DR: The prevalence of dental caries among primary and secondary school children was found to be related to sex, type of schools, region, and BMI, and caries was inversely associated with BMI among primaryand secondary school students in Shenzhen.
Abstract: Dental caries and overweight/obesity are health problems with shared risk factors, but the relationships between caries and BMI need to be further explored. The objective was to evaluate the current status of dental caries and the association between dental caries and Body Mass Index (BMI) among primary and secondary school students in Shenzhen, China, during the 2016–2017 academic year. A population-based, cross-sectional study that enrolled a total of 1,196,004 students was conducted in Shenzhen. Physical and dental examinations were given to all primary and secondary school students by certified physicians and dentists following the national specification for student health examinations, and dental caries was diagnosed using WHO criteria. Descriptive analysis was applied to assess current oral health status and a multifactorial, logistic regression model was employed to evaluate the relationship between dental caries and obesity. A total of 1,196,004 students participated in the census. Mean age of the participants was 10.3 years, ranging from 6 to 20 years. The prevalence of dental caries was 41.15% in the present study, which was higher among girls (42.88%) than that in boys (39.77%) with a p-value of < 0.001. Students in public schools showed a significantly lower (p < 0.001) caries prevalence (37.36%) compared with those in private schools (47.96%). The caries restoration rate of students in Shenzhen was only 10.30%, which means only one out of ten students with caries received restorations. The mean dmft and DMFT scores were 0.97 and 0.33, respectively. More girls (10.96%) had their teeth filled than boys (9.78%). The restoration rate was higher (p < 0.001) in public schools (11.73%) than in private ones (8.35%). Children who were overweight or obese had a lower risk of experiencing caries compared to those who were within a normal weight (OR = 0.74/0.64). Caries was inversely associated with BMI among primary and secondary school students in Shenzhen. The prevalence of dental caries among primary and secondary school children was found to be related to sex, type of schools, region, and BMI. Further studies and more government support are required to confirm the findings of this study and to address current oral health problems.
TL;DR: ACTIVA showed a higher degree of biocompatibility to subcutaneous tissues in comparison to both iRoot BP and MTA-HP cements in regard to decrease the intensity of inflammation, with subsequent fibrous connective tissue remodeling and better healing patterns.
Abstract: The purpose of this study was to compare the biocompatibility of three bioactive materials, namely ACTIVA bioactive restorative resin composite, iRoot BP plus and Mineral Trioxide Aggregate (MTA) Angelus-HP. Seventy-five Wistar male rats were subjected to subcutaneous implantation of four polyethylene tubes; one empty tube was used as control (Group 1), and the other tubes were filled with ACTIVA (Group 2), iRoot BP (Group 3) and MTA-HP (Group 4). Then, the rats were subdivided into 3 groups according to the sacrification time into one, two and 4 weeks (n = 25 rats). Tissue specimens were submitted to histopathological and immunohistochemical analysis of α-SMA and caspase 3. The one-way Anova test revealed that ACTIVA group exhibited minimal inflammation in comparison to calcium silicate cements (iRoot BP and MTA-HP groups). iRoot BP group significantly revealed a more severe degree of chronic inflammation in comparison to other groups (P < 0.05). ACTIVA group showed marked regression of inflammation and fibrosis comparable to the control, while iRoot BP group revealed remarkable fibrosis and calcification, with less degrees in MTA-HP group (P < 0.05). Immunostaining of both α-SMA and caspase 3 revealed lower indexes in ACTIVA group consistent with the control (P < 0.05). ACTIVA showed a higher degree of biocompatibility to subcutaneous tissues in comparison to both iRoot BP and MTA-HP cements in regard to decrease the intensity of inflammation, with subsequent fibrous connective tissue remodeling and better healing patterns. Preliminary data suggests that the application of ACTIVA in retrograde fillings.
TL;DR: It is important to delay tooth loss and preserve the stable remaining teeth to help prevent dementia, and the relationship between dementia onset and these variables using logistic regression analysis is suggested.
Abstract: To determine the effect of missing teeth on the risk of dementia onset among individuals who received tooth extractions and those who did not, based on the number of missing teeth. We selected individuals who had not been diagnosed or treated for dementia between 2002 to 2011 from the National Health Insurance Service-Elderly Cohort Database (NHIS-ECD). We divided participants into two cohorts, a tooth extraction and non-extraction cohort, based on tooth loss from 2002 to 2011. After propensity score matching, there were 104,903 individuals in each cohort, and we included a total of 209,806 individuals in this study. Each cohort was grouped by sex, age, residential area, health insurance eligibility, income level, history of dental caries, history of periodontal treatment, and number of extracted teeth. We analyzed the relationship between dementia onset and these variables using logistic regression analysis. Individuals with tooth loss had a higher risk for dementia than those without tooth loss (odds ratio [OR] = 1.18; 95% confidence interval [CI]: 1.146–1.215). Regarding the incidence of dementia, the OR increased as the number of missing teeth and age increased, and the OR was higher for women (OR = 1.33; 95% CI: 1.286–1.367) than for men, and this difference was statistically significant (P < 0.01). The incidence of dementia decreased with periodontal treatment (OR = 0.96; 95% CI: 0.932–0.992) and increased with dental caries (OR = 1.07; 95% CI: 1.035–1.101). These results suggest that it is important to delay tooth loss and preserve the stable remaining teeth to help prevent dementia.