Showing papers in "Brazilian Oral Research in 2018"
TL;DR: The objective of this literature review is to present and discuss the characteristics of the NiTi alloys used in the major instrumentation systems available in the market, as well as the influence of the metallurgical and mechanical properties of NiTi instruments and the movements that drive them, to enable more accurate and predictable planning of root canal preparation.
Abstract: The introduction of automated instrumentation in endodontics represented a major advance in progress for this specialty, with improvements in the quality and predictability of root canal preparation and a significant reduction in procedural errors. In recent years, endodontic instruments have undergone a series of changes brought about by modifications in design, surface treatments, and thermal treatments. In addition, new movements have also been incorporated to offer greater safety and efficiency, optimizing the properties of the NiTi alloy, especially through eccentric rotary motion. An understanding of the mechanical properties of these new NiTi instruments and their effect on the clinical performance of root canal preparation is essential if dental practitioners are to select the instruments that provide optimal clinical outcomes, especially in curved or flattened canals. The objective of this literature review is to present and discuss the characteristics of the NiTi alloys used in the major instrumentation systems available in the market, as well as the influence of the metallurgical and mechanical properties of NiTi instruments and the movements that drive them, to enable more accurate and predictable planning of root canal preparation.
132 citations
TL;DR: The reasons why some areas remain unprepared by instruments are disclosed and strategies to circumvent this issue and enhance infection control during endodontic treatment/retreatment of teeth with apical periodontitis are discussed.
Abstract: Chemomechanical preparation is intended to clean, disinfect, and shape the root canal. This step is of utmost importance during treatment of infected teeth with apical periodontitis, because treatment outcome depends on how effectively the clinician eliminates bacteria, their products, and necrotic tissue that would serve as substrate for bacterial regrowth. Nonetheless, curvatures and complex internal anatomical variations of the root canal system can pose a high degree of difficulty in reaching these goals. In infected teeth, bacteria may persist not only in difficult-to-reach areas such as isthmuses, ramifications, dentinal tubules, and recesses from C-shaped or oval/flattened canals, but also in areas of the main canal wall that remain untouched by instruments. If bacteria withstand chemomechanical procedures, there is an augmented risk for post-treatment apical periodontitis. This article discloses the reasons why some areas remain unprepared by instruments and discusses strategies to circumvent this issue and enhance infection control during endodontic treatment/retreatment of teeth with apical periodontitis.
107 citations
TL;DR: The complex network between endodontic infectious content and host immune response in apical periodontitis is discussed and a better understanding of the relationship of microbial factors with clinical symptomatology is important to establish appropriate therapeutic procedures for a more predictable outcome of endodentic treatment.
Abstract: Evidence shows the polymicrobial etiology of endodontic infections, in which bacteria and their products are the main agents for the development, progression, and dissemination of apical periodontitis. Microbial factors in necrotic root canals (e.g., endotoxin) may spread into apical tissue, evoking and supporting a chronic inflammatory load. Thus, apical periodontitis is the result of the complex interplay between microbial factors and host defense against invasion of periradicular tissues. This review of the literature aims to discuss the complex network between endodontic infectious content and host immune response in apical periodontitis. A better understanding of the relationship of microbial factors with clinical symptomatology is important to establish appropriate therapeutic procedures for a more predictable outcome of endodontic treatment.
92 citations
TL;DR: The present findings suggest an association between MS and PD, where individuals with MS are 38% more likely to present PD than individuals without this condition, and prospects for future studies should be conducted to establish cause and effect relations.
Abstract: The aim of the present study was to evaluate the association between metabolic syndrome (MS) and periodontitis (PD), through a systematic review and meta-analysis. Original observational studies assessing the association between MS and PD in adults, published before May 11th (2017), were identified through electronic searches of MEDLINE, EMBASE and Cochrane Library databases. The PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guideline was used. For studies to be included, they had to mention the criteria used to diagnose MS and to have used at least one clinical measure to diagnose PD. There was no language restriction. Three reviewers independently identified eligible studies for possible inclusion in the systematic review and meta-analysis. The quality of the studies was evaluated by the Newcastle-Ottawa scale for observational studies. A random model meta-analysis was conducted. The strategies used to investigate heterogeneity were sequential analysis, subgroup analysis, univariate meta-regression and sensitivity analysis. Thirty-three studies met the inclusion criteria for the systematic review, and 26 had enough information to be included in the meta-analysis, totaling 52,504 patients. MS and PD were associated with an odds ratio of 1.38 (95%CI 1.26-1.51; I2 = 92.7%; p < 0.001). Subgroup analysis showed that complete periodontal examination (I2 = 70.6%; p < 0.001) partially explained the variability between studies. The present findings suggest an association between MS and PD. Individuals with MS are 38% more likely to present PD than individuals without this condition. Prospective studies should be conducted to establish cause and effect relations between MS and PD.
72 citations
TL;DR: There is a consensus that the remaining tooth structure plays an important role in ETT survival, although the current literature still is contradictory on the influence of post type on root fractures as well as the benefits of avoiding a post or partially restoring a tooth.
Abstract: Adhesive procedures have changed the way to restore endodontically treated teeth (ETT). It started with the shift from cast post-and-core to fiber post. The original focus on strength also shifted towards failure modes, revealing that catastrophic failures are still a concern when restoring endodontically-treated teeth even with fiber posts. As an alternative, postless approaches have been proposed in order to improve the chances of repair. The goal of this critical review is to present a survey of the current knowledge on adhesive approaches to restore endodontically treated teeth with and without extensive coronal tissue loss. The preservation of tooth structure of endodontically treated teeth is paramount. Partial versus full coverage of ETT, the role of the ferrule, the post type effect on catastrophic failures and postless alternatives as endocrowns and postless build-ups are reviewed. There is a consensus that the remaining tooth structure plays an important role in ETT survival, although the current literature still is contradictory on the influence of post type on root fractures as well as the benefits of avoiding a post or partially restoring a tooth. More clinical studies should be carried out with the modern postless adhesive alternatives to conventional approaches.
65 citations
TL;DR: Despite their non-toxicity and shrinkage similar to that of conventional materials, not all commercial bulk-fill materials were able to maintain a conversion as high as 80% of the superficial layer, at the 4-mm depth, indicating some failure in the bulk- Fill design of some commercial brands.
Abstract: Bulk-fill composites are claimed to be restorative materials used in deep preparations and effectively photoactivated in layers up to 4 mm. The aim of the present study was to evaluate the degree of conversion, post-gel volumetric shrinkage, and cytotoxicity of six bulk-fill and two conventional composites. Degree of conversion was determined by FTIR spectroscopy; post-gel volumetric shrinkage was determined using the strain gauge method; and cytotoxicity in human fibroblasts was evaluated indirectly by the MTT assay. Data were subjected to one-way ANOVA/Tukey's test (α = 0.05). All materials, including bulk-fill and conventional composites, were classified as non-toxic, with cell viability higher than 70%. Bulk-fill composites exhibited volumetric shrinkage similar to or lower (1.4 to 0.4%) than that of conventional composites (1.7-2.1%). However, only four of the bulk-fill composites were able to sustain a homogeneous conversion at the 4-mm depth. Despite their non-toxicity and shrinkage similar to that of conventional materials, not all commercial bulk-fill materials were able to maintain a conversion as high as 80% of the superficial layer, at the 4-mm depth, indicating some failure in the bulk-fill design of some commercial brands. Therefore, the use of bulk-fill materials in dental practice is advantageous, but special attention should be given to the selection and correct use of the materials.
65 citations
TL;DR: The latest research studies on the physical, chemical, and biological properties of tricalcium silicate-based cements are discussed in this critical review.
Abstract: Mineral trioxide aggregate (MTA) has been widely used for different reparative procedures in endodontics. The extensive use of this cement for pulp capping, apexifications, apical surgeries, and revascularization is related to its ability to induce tissue repair and to stimulate mineralization. Several research studies have tested modifications in the composition of MTA-based cements in order to enhance their clinical performance. Novel formulations have been introduced in the market with the aim of increasing flowability. Important properties such as appropriate radiopacity and setting time, color stability, alkaline pH, release of calcium ions, and biocompatibility have to be considered in these new formulations. The latest research studies on the physical, chemical, and biological properties of tricalcium silicate-based cements are discussed in this critical review.
57 citations
TL;DR: The essential aspects for repairing this deleterious tissue injury will be addressed, including its diagnosis, prognosis, and a discussion about the materials actually suggested to seal root canal perforation.
Abstract: Root perforation results in the communication between root canal walls and periodontal space (external tooth surface). It is commonly caused by an operative procedural accident or pathological alteration (such as extensive dental caries, and external or internal inflammatory root resorption). Different factors may predispose to this communication, such as the presence of pulp stones, calcification, resorptions, tooth malposition (unusual inclination in the arch, tipping or rotation), an extra-coronal restoration or intracanal posts. The diagnosis of dental pulp and/or periapical tissue previous to root perforation is an important predictor of prognosis (including such issues as clinically healthy pulp, inflamed or infected pulp, primary or secondary infection, and presence or absence of intracanal post). Clinical and imaging exams are necessary to identify root perforation. Cone-beam computed tomography constitutes an important resource for the diagnosis and prognosis of this clinical condition. Clinical factors influencing the prognosis and healing of root perforations include its treatment timeline, extent and location. A small root perforation, sealed immediately and apical to the crest bone and epithelial attachment, presents with a better prognosis. The three most widely recommended materials to seal root perforations have been calcium hydroxide, mineral trioxide aggregate and calcium silicate cements. This review aimed to discuss contemporary therapeutic alternatives to treat root canal perforations. Accordingly, the essential aspects for repairing this deleterious tissue injury will be addressed, including its diagnosis, prognosis, and a discussion about the materials actually suggested to seal root canal perforation.
56 citations
TL;DR: The anatomy, the type of design and kinematics of instruments, and the experimental design are factors that directly influence the quality of biomechanical preparation of root canals analyzed in a qualitative and quantitative manner by micro-CT.
Abstract: This literature review has critically analyzed the published research related to the biomechanical preparation of root canals with three-dimensional analysis using micro-computed tomography (micro-CT). In December 2017, six databases (PubMed, Cochrane, Web of Science, Embase, Scopus, and Science Direct) were accessed using keywords to find articles including the use of the micro-CT analysis in biomechanical root canal preparation. There were 60 full articles that were selected, which were screened and read by two authors. The research that was reviewed and analyzed included root canal anatomy and sample selection, changes in canal shape and untouched canal areas, canal transportation and centering ability, and kinematics (motion). Of the studies selected, 49.18% discussed anatomical characteristics, with 54.1% of these studies describing mesial roots of mandibular molars with moderate curvature. Only 35% used a stratified distribution based on root canal system morphology and quantitative data obtained by micro-CT. The analysis of canal transportation and centering ability showed that transport values in the apical third exceeded the critical limit of 0.3 mm in mesial roots of mandibular molars with moderate curvature, especially in the groups in which a reciprocating system was used. In relation to kinematics, 91.70% of the reviewed studies evaluated continuous rotating instruments, followed by reciprocating rotation (38.33%), vibratory (15%), and the adaptive kinematics, which was in only 8.33%. The reciprocating kinematics was associated with higher canal decentralization and transportation indexes, as well as a greater capacity for dentin removal and debris accumulation. This literature review showed that the anatomy, the type of design and kinematics of instruments, and the experimental design are factors that directly influence the quality of biomechanical preparation of root canals analyzed in a qualitative and quantitative manner by micro-CT.
55 citations
TL;DR: The aim of this study was to evaluate stress distribution in an occlusal veneer according to the restorative material, restoration thickness, and cement layer thickness and it was found that the thicker the restoration, the higher the tensile stress concentration in the restoration.
Abstract: The aim of this study was to evaluate stress distribution in an occlusal veneer according to the restorative material, restoration thickness, and cement layer thickness. A tridimensional model of a human maxillary first molar with an occlusal veneer preparation was constructed using a modeling software of finite element analysis. The model was replicated 9 times to evaluate the factors: restoration thickness (0.6, 1.2, and 1.8 mm) and cement layer thickness (100, 200, and 300 μm). Then, each model received different restorative materials (High Translucency Zirconia - [YZHT], Lithium Disilicate - [LD], Zirconia Reinforced Lithium Silicate - [ZLS], Feldspathic - [F], and Hybrid Ceramic - [HC]), totaling forty-five groups. An axial load (600 N) was applied on the occlusal face for static structural analysis. Solids were considered isotropic, homogeneous, and linearly elastic. Contacts were considered perfectly bonded. Fixation occurred in the dental root and a mechanical static structural analysis was performed. Descriptive statistical analysis and one-way ANOVA (α =10%) were performed for tensile stress peak values in the restoration and cement layer. The difference between groups was compared using the Tukey's test with 10% significance to match the percentage of the mesh convergence test. According to the results, the cement layer thickness did not influence stress distribution in the restoration (p ≥ 0.10). The thicker the restoration, the higher the tensile stress concentration in the restoration. The graphs showed higher stress concentration in the YZHT, followed by LD, F, ZLS, and HC. Also, the restorative material influenced stress concentration on the cement layer, which decreased according to the sequence HC>YZHT>ZLS>LD>F. HC stood out for causing the least stress concentration in the restoration. Cement layer thickness did not interfere in the mechanical performance of the restorations.
51 citations
TL;DR: It is indicated that lithium disilicate crowns fabricated with the press technique have measurably smaller marginal gaps compared with those fabricated with CAD/CAM technique within in vitro environments.
Abstract: This study aimed to compare the vertical marginal gap of teeth restored with lithium disilicate crowns fabricated using CAD/CAM or by pressed ceramic approach. Twenty mandibular third molar teeth were collected after surgical extractions and prepared to receive full veneer crowns. Teeth were optically scanned and lithium disilicate blocks were used to fabricate crowns using CAD/CAM technique. Polyvinyl siloxane impressions of the prepared teeth were made and monolithic pressed lithium disilicate crowns were fabricated. The marginal gap was measured using optical microscope at 200× magnification (Keyence VHX-5000, Japan). Statistical analysis was performed using Wilcoxon test. The lithium disilicate pressed crowns had significantly smaller (p = 0.006) marginal gaps (38 ± 12 μm) than the lithium disilicate CAD/CAM crowns (45 ± 12 μm). This research indicates that lithium disilicate crowns fabricated with the press technique have measurably smaller marginal gaps compared with those fabricated with CAD/CAM technique within in vitro environments. The marginal gaps achieved by the crowns across all groups were within a clinically acceptable range.
TL;DR: The present study showed that tooth loss in posterior maxilla favors sinus pneumatization and the identification of LSP at molar roots seems to indicate a greater necessity for sinus lift surgeries.
Abstract: This is a cross-sectional study that aimed to estimate maxillary sinus floor (MSF) pneumatization in single missing tooth of posterior maxilla, by using cone-beam computed tomography (CBCT). CBCT images were analyzed bilaterally and divided into 2 groups: edentulous site (EdS) - edentulous single region of upper second premolar, first or second molars; Tooth site (TS) - contralateral region homologous to the EdS region, with tooth present. Variables evaluated were: sinus height (SH), estimated sinus pneumatization (eSP: ∆ EdS - TS), healed ridge height (HR) and presence of localized sinus pneumatization (LSP) in molars teeth at TS. HR were categorized according to therapeutic option for posterior maxilla. 183 CBCT scans were included and it was observed that EdS presented a higher SH than the TS (p < 0.001) showing an eSP of 0.9 ± 2.93 mm. First molars presented the highest SH for both sides, although significant differences were detected when compared to second molars. First molars were mostly affected by LSP at TS (36 out of 43). Individuals with LSP at TS presented lower HR than the ones without LSP (p < 0.05). 54% of the cases presenting LSP obtained HR < 5 mm, which indicates sinus lift surgery. The present study showed that tooth loss in posterior maxilla favors sinus pneumatization and the identification of LSP at molar roots seems to indicate a greater necessity for sinus lift surgeries.
TL;DR: There is scant evidence to determine the duration of the effectiveness of toxin type A on a gummy smile; the effect tends to be stable until at least 8 weeks of follow-up, and the gingival exposure may not return to baseline within 12 weeks of following-up.
Abstract: Botulinum toxin type A is effective in reducing excessive gingival display caused by hyperfunctional upper lip elevator muscles; however, this effect is transient. This study aimed to determine the duration of the effectiveness of botulinum toxin type A on a gummy smile. A systematic search was conducted using Medline (PubMed), Scopus, and Web of Science electronic databases, from 1970 to March 2017 with no language restriction; the search included studies evaluating adult patients with excessive gingival display who were treated with botulinum toxin and were followed-up for at least 3 months. OpenGrey and Clinical Trial Registry were also consulted. Quality assessment was applied to determine the level of evidence and bias, and a meta-analysis was performed. Of 2181 full texts, 71 were obtained, with 3 prospective studies meeting the selection criteria. The gingival display was significantly reduced to baseline with 2, 4, and 8 weeks of treatment. The gingival display considerably reduced at the baseline-2-week comparison (-4.44 mm using raw data and-4.05 mm using the standard difference) and increased throughout the weeks of follow-up. There is scant evidence to determine the duration of the effectiveness of toxin type A on a gummy smile. The effect tends to be stable until at least 8 weeks of follow-up, and the gingival exposure may not return to baseline within 12 weeks of follow-up. Well-designed randomized clinical trials with a minimum of 6 months of follow-up are necessary to strengthen the evidence.
TL;DR: Short implant placement is an effective alternative because of fewer biological complications and similar survival and marginal bone loss than long implant placement with maxillary sinus augmentation, however, the risk of mechanical complications associated with the prostheses fitted on short implants should be considered.
Abstract: This study compared the survival rate of dental implants, amount of marginal bone loss, and rates of complications (biological and prosthetic) between short implants and long implants placed after maxillary sinus augmentation This systematic review has been registered at PROSPERO under the number (CRD42017073929) Two reviewers searched the PubMed/MEDLINE, Embase, LILACS, and Cochrane Library databases Eligibility criteria included randomized controlled trials, comparisons between short implants and long implants placed after maxillary sinus augmentation in the same study, and follow-up for >6 months The Cochrane Collaboration's tool for assessing the risk of bias in randomized trials was used to assess the quality and risk of bias of the included studies The search identified 1366 references After applying the inclusion criteria, 11 trials including 420 patients who received 911 dental implants were considered eligible No significant difference was observed in the survival rate [p = 086; risk ratio (RR): 108; 95% confidence interval (CI): 046-252] or in the amount of marginal bone loss (p = 008; RR: -005; 95%CI: -010 to 001) However, higher rates of biological complications for long implants associated with maxillary sinus augmentation were observed (p < 000001; RR: 021; 95%CI: 010-041), whereas a higher prosthetic complication rate for short implants was noted (p = 0010; RR: 315; 95%CI: 132-751) Short implant placement is an effective alternative because of fewer biological complications and similar survival and marginal bone loss than long implant placement with maxillary sinus augmentation However, the risk of mechanical complications associated with the prostheses fitted on short implants should be considered
TL;DR: All protocols tested were able to promote pain relief, improve mandibular function, and reduce the negative psychosocial aspects and levels of anxiety in TMD patients, however, the combination of PBM and MT did not promote an increase in the effectiveness of both therapies alone.
Abstract: The effectiveness of photobiomodulation (PBM) and manual therapy (MT), alone or combined (CT), were evaluated in pain intensity, mandibular movements, psychosocial aspects, and anxiety symptoms of temporomandibular disorder (TMD) patients. Fifty-one TMD patients were randomly assigned to three groups: the PBM group (n = 18), which received PBM with 808 nm, 100 mW, 13.3 J/cm2, and 4 J per point; the MT group (n=16) for 21 minutes each session on masticatory muscles and temporomandibular joint TMJ; and the CT group (n = 17), applied during twelve sessions. Seven evaluations were performed in different moments using visual analogue scale (VAS), Research Diagnosis Criteria for Temporomandibular Disorders (RDC/TMD) Axis I and II, and Beck anxiety inventory (BAI). All groups demonstrated reductions in pain and improvement in jaw movements during treatment and at follow-up ( 0.05). However, depression symptoms showed a reduction in PBM and CT groups (p≤0.05). All treatments promoted reduction in physical symptoms with and without pain and enhancement of jaw disabilities (p ≤ 0.05). MT promotes improvement in 5 functions, PBM in 2, and CT in 1 (p < 0.001). BAI analysis revealed that all treatments lead to a reduction in anxiety symptoms (p≤0.05). All protocols tested were able to promote pain relief, improve mandibular function, and reduce the negative psychosocial aspects and levels of anxiety in TMD patients. However, the combination of PBM and MT did not promote an increase in the effectiveness of both therapies alone.
TL;DR: It can be concluded that, in terms of fatigue, high translucent polycrystalline zirconia is the best choice for monolithic restorations as it bears the highest load before cracking/fracturing.
Abstract: This in vitro study evaluated the fatigue strength of different ceramic materials indicated for monolithic restorations. Disc-shaped specimens were made according to ISO 6872 from five different ceramic materials: feldspathic ceramic (FC), polymer-infiltrated ceramic network (PIC), lithium disilicate glass-ceramic (LD), zirconia-reinforced lithium silicate glass-ceramic (ZLS), and high translucent tetragonal zirconia polycrystals doped by yttrium (YZ-HT). After obtaining the mean of each material (n = 5) from monotonic load-to-failure tests, specimens (n = 20) were subjected to fatigue tests (staircase method) using a biaxial flexural setup (piston-on-three-balls), to determine the fatigue strength. The parameters used for fatigue tests were: 100,000 cycles at 10 Hz, initial load of ~ 60% of mean load-to-failure, and step size of 5% of the initial load (specific for each ceramic material). Kruskal-Wallis and Bonferroni's test (α = 0.05) were used to analyze the fatigue strength data. Fatigue strength (MPa) of the materials was statistically different among each other as follows: YZ-HT (370.2 ± 38.7) > LD (175.2 ± 7.5) > ZLS (152.1 ± 7.5) > PIC (81.8 ± 3.9) > FC (50.8 ± 1.9). Thus, it can be concluded that, in terms of fatigue, high translucent polycrystalline zirconia is the best choice for monolithic restorations as it bears the highest load before cracking/fracturing.
TL;DR: The meta-analysis indicated that the use of PMMA yields complication rates that are near those of autologous bone and titanium mesh.
Abstract: Polymethyl methacrylate (PMMA) has been considered a suitable material for cranioplasty. However, no consensus has been reached concerning the best material for cranioplasty with regard to minimizing complications. Thus, this systematic review and meta-analysis aimed to compare the complication rates of PMMA with those of autologous bone and titanium mesh. This review was registered with PROSPERO (CRD42016042725). Systematic searches were conducted on PubMed/MEDLINE, Scopus, and Web of Science. The focus question was, "Do PMMA prostheses used in cranioplasty have complications rates similar to those of autologous bone and titanium mesh?" A meta-analysis of complication rates was performed on the basis of dichotomous outcomes assessed by risk ratio (RR) with corresponding 95% confidence intervals (CI). From 1014 data sources, 11 articles were selected according to eligibility criteria. These articles involved 1,256 individuals and 1,278 cranioplasties using autologous bone (n = 408), PMMA (n = 379), or titanium (n = 151). The follow-up period ranged from 63 days to 54.3 months. No difference was observed between the complication rates of PMMA and autologous bone (p = 0.94; RR, 0.98; 95%CI, 0.54-1.75) or between PMMA and titanium (p = 0.38; RR, 1.59; 95%CI, 0.57-4.48). Sub-analysis of the reasons for craniotomy (trauma/non-trauma) was conducted, which revealed no significant difference (p = 0.91; RR, 0.95; 95%CI, 0.37-2.42). The meta-analysis indicated that the use of PMMA yields complication rates that are near those of autologous bone and titanium mesh.
TL;DR: The authors will address the effect of the endodontic treatment procedures on canal shape and mechanical properties of a tooth, and also discuss the parameters and the biomechanical principles of root canal treated teeth.
Abstract: Endodontic treatment is a common dental procedure used for treating teeth which the pulp tissue has become irreversibly inflamed or necrotic as a result of the carious process or dental trauma. This procedure which involves mechanical and chemical preparation of root canal may affect several mechanical and physical properties of the tooth structure. The endodontic treatment can also influence the longevity of the rehabilitation of endodontically treated teeth and biomechanics during the oral function. For restoring endodontically treated teeth several factor and clinical decisions should be observed. The decision of the fiberglass post usage and the restorative materials are related to several factors such as the quantity and quality of remaining dental structure, presence of ferrule, post cementation length and final coronal restoration. In this review, the authors will address the effect of the endodontic treatment procedures on canal shape and mechanical properties of a tooth, and also discuss the parameters and the biomechanical principles of root canal treated teeth.
TL;DR: The present findings confirm that tooth bleaching has become a frequently desired dental treatment to improve dental aesthetics in the population and a considerable rate of adults has performed the treatment.
Abstract: Population-based studies estimating the prevalence of tooth bleaching desire or the percentage of individuals who had performed this treatment are rare. Thus, the aim of this study was to evaluate the desire to perform tooth bleaching and the prevalence of adult individuals who had performed the treatment and investigate the association of these outcomes. A subsample (n = 536) of the 1982 Pelotas birth cohort in southern Brazil was investigated at the ages 15, 24 and 31 by clinical examinations and interviews. The prevalence of bleaching at 31 years was 15.6% [95%CI 12.6–18.9] while 85.9% [95%CI 82.7–88.7] reported they desired the treatment. Multivariate Poisson regression analysis showed that individuals who have visited the dentist within the last year showed a treatment prevalence ratio (PR) 2.31 times [95%CI 1.40–3.83] higher compared with those who had the last dental visit more than a year before the interview. Similarly, individuals with smoking habits presented an elevated PR of 1.60 [95%CI 1.00–2.55], and the low-income trajectory group showed the largest PR of desire for tooth bleaching (1.17 [95%CI 1.07–1.28]). Moreover, individuals from the high-risk caries trajectory group presented a higher prevalence of desire for tooth bleaching than individuals from low caries trajectory group. Individuals who have declared being “dissatisfied” with their dental color presented a prevalence of desire for tooth bleaching 16% greater than “satisfied” ones. Thus, the present findings confirm that tooth bleaching has become a frequently desired dental treatment to improve dental aesthetics in the population and a considerable rate of adults has performed the treatment.
TL;DR: There was significantly less bleeding and recession in the LAP group than in the patients with the generalized forms of periodontitis, and patients with GAP and GCP had poorer OHRQoL than LAP patients.
Abstract: The purpose of this cross-sectional study was to investigate the effect of different forms of periodontal diseases on Oral Health-Related Quality of Life (OHRQoL). Fifty-two patients with Aggressive Periodontitis (AP) or Chronic Periodontitis (CP) were included: nine patients with Localized Aggressive Periodontitis (LAP), thirty-three patients with Generalized Aggressive Periodontitis (GAP) and ten patients with Generalized Chronic Periodontitis (GCP). Oral Health Impact Profile questionnaires (OHIP-14) were distributed after a clinical examination that measured the following periodontal parameters: tooth loss, bleeding on probing (BoP), probing depth (PD), gingival recession (REC) and clinical attachment level (CAL). The global OHIP-14 score means were 10.6 for LAP, 16.5 for GAP, and 17.5 for GCP. A statistically significant difference (p < 0.01) was observed between the LAP group and the other two groups. There was significantly less bleeding and recession in the LAP group than in the patients with the generalized forms of periodontitis. LAP, GAP and GCP have an impact on patient quality of life when measured using the OHIP-14. Patients with GAP and GCP had poorer OHRQoL than LAP patients.
TL;DR: Clinical and radiographic periodontal parameters were worse between prediabetes and T2DM patients compared with controls; however, these parameters were comparable betweenpredi diabetes and T1DM patients.
Abstract: The aim of the present study was to compare the clinical and radiographic periodontal parameters in prediabetes, type 2 diabetes mellitus (T2DM), and non-diabetic patients. Forty-one patients with prediabetes (Group 1), 43 patients with T2DM (Group 2), and 41 controls (Group 3) were included. Demographic data were recorded using a questionnaire. Full-mouth clinical (plaque index [PI], bleeding on probing [BOP], probing depth [PD], clinical attachment loss [CAL], missing teeth [MT]) and radiographic (marginal bone loss [MBL]) parameters were measured on digital radiographs. In all groups, hemoglobin A1c (HbA1c) levels were also measured. P values less than 0.05 were considered statistically significant. The mean age and HbA1c levels of participants in Groups 1, 2, and 3 were 53.4±3.5, 60.1 ± 0.6, and 56.6 ± 2.5 years and 6.1%, 8.4%, and 4.8%, respectively. The mean duration of prediabetes and T2DM in patients from Groups 1 and 2 were 1.9 ± 0.3 and 3.1 ± 0.5 years, respectively. PI, BOP, PD, MT, CAL, and MBL were significantly higher in Groups 1 (p < 0.05) and 2 (p < 0.05) than in Group 3. There was no statistically significant difference in these parameters in Groups 1 and 2. Periodontal parameters were worse between prediabetes and T2DM patients compared with controls; however, these parameters were comparable between prediabetes and T2DM patients.
TL;DR: It is suggested that OLP patients have an increased inflammatory response, as indicated by the proinflammatory profile of salivary cytokines and NO, and it is concluded that salivARY cytokine and NO measurements may have significant diagnostic and prognostic potential for monitoring disease activity and therapeutic responses in OLP.
Abstract: The etiopathogenesis of oral lichen planus (OLP) is still not fully elucidated, and it is believed that its development could involve a neuro-immune-endocrine profile. This systematic review investigated the relationship between cytokines, cortisol, and nitric oxide (NO) in the saliva of OLP patients. An electronic search was conducted in Pubmed/Medline, Scopus, LIVIVO, and Web of Science databases with no restriction of language to identify studies published up to December 2017. Data extraction was performed using the Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA) guidelines. A total of 140 articles were retrieved, and 32 articles fulfilled the inclusion criteria (cytokines = 17; cortisol = 9; NO = 6). The most studied cytokines in the saliva of OLP patients were interleukins IL-4, IL-6, IL-8, IFN-ү, and TNF-α, which were higher in OLP patients than in healthy controls (HC). Salivary cortisol was found to be higher in OLP than in HC in most (55.5%) of the selected studies, and all studies related to NO found higher levels of this marker in OLP than in HC. Despite controversial results, our review suggests that OLP patients have an increased inflammatory response, as indicated by the proinflammatory profile of salivary cytokines. In addition, we conclude that salivary cytokine and NO measurements may have significant diagnostic and prognostic potential for monitoring disease activity and therapeutic responses in OLP.
TL;DR: This literature review was conducted to discuss currently available information concerning PCO after traumatic dental injuries (TDI), and was gathered according to three topics: I) physiopathology ofPCO after TDI; II) frequency and predictors of pulpal healing induced by PCO; and III) clinical findings related to PCO.
Abstract: Pulp canal obliteration (PCO) is a frequent finding associated with pulpal revascularization after luxation injuries of young permanent teeth. The underlying mechanisms of PCO are still unclear, and no experimental scientific evidence is available, except the results of a single histopathological study. The lack of sound knowledge concerning this process gives rise to controversies, including the most suitable denomination. More than a mere semantic question, the denomination is an important issue, because it reflects the nature of this process, and directly impacts the treatment plan decision. The hypothesis that accelerated dentin deposition is related to the loss of neural control over odontoblastic secretory activity is well accepted, but demands further supportive studies. PCO is seen radiographically as a rapid narrowing of pulp canal space, whereas common clinical features are yellow crown discoloration and a lower or non-response to sensibility tests. Late development of pulp necrosis and periapical disease are rare complications after PCO, rendering prophylactic endodontic intervention useless. Indeed, yellowish or gray crown discoloration may pose a challenge to clinicians, and may demand endodontic intervention to help restore aesthetics. This literature review was conducted to discuss currently available information concerning PCO after traumatic dental injuries (TDI), and was gathered according to three topics: I) physiopathology of PCO after TDI; II) frequency and predictors of pulpal healing induced by PCO; and III) clinical findings related to PCO. Review articles, original studies and case reports were included aiming to support clinical decisions during the follow-up of teeth with PCO, and highlight future research strategies.
TL;DR: Use of 1% HA gel after tooth extraction accelerates bone repair in human dental sockets, and no significant difference was found between groups regarding the alveolar dimensions.
Abstract: This study evaluated the effects of hyaluronic acid (HA) on bone repair of human dental sockets Thirty-two lower first premolars were extracted from 16 patients (2 per patient) for orthodontic reasons Following the extractions, one socket was randomly filled with 1% HA gel, while the other was allowed to naturally fill with blood clot After 30 and 90 days of surgery, patients underwent cone beam computed tomography Five central orthoradial slices were captured from each socket The gray intensity was measured in each image and results were reported as mean percentage of bone formation The buccolingual alveolar ridge width was measured and dimensional changes were compared between the postoperative intervals The pattern of alveolar trabecular bone was evaluated through the fractal dimension Treated sockets showed a higher percentage of bone formation and fractal dimension values (5817% and 1098, respectively) compared with controls (4897% and 1074, respectively) in the 30-day postoperative period (p 005) Use of 1% HA gel after tooth extraction accelerates bone repair in human dental sockets
TL;DR: Pediatric dentists should avoid conventional glass ionomer cement for restoring primary molars with increased risk of failure than compomer, resin-modified glass ionomers cement, amalgam, and composite resin, according to a systematic review.
Abstract: This study aimed to compare the longevity of different conventional restorative materials placed in posterior primary teeth. This systematic review was conducted following the PRISMA statement and registered in PROSPERO (CRD42016035775). A comprehensive electronic search without date or language restrictions was performed in PubMed/MEDLINE, Cochrane Central Register of Controlled Trials, Scopus, Turning Research Into Practice (TRIP) and Clinical Trials databases up to January 2017, selecting randomized clinical trials that assessed the longevity of at least two different conventional restorative materials performed in primary molars. Seventeen studies were included in this systematic review. Pairwise and network meta-analyses were performed and relative risks and 95% confidence intervals (CI) calculated. Two reviewers independently selected the studies, extracted the data, and assessed the risk of bias. Restorations of primary molars with conventional glass ionomer cement showed increased risk of failure than compomer, resin-modified glass ionomer cement, amalgam, and composite resin. Risk of bias was low in most studies (45.38% of all items across studies). Pediatric dentists should avoid conventional glass ionomer cement for restoring primary molars.
TL;DR: A high frequency of familial recurrence and of parental consanguinity was evidenced in the studied population, especially for the cleft lip and cleft palate type, and the need for additional research to confirm the association between environmental factors and the development of orofacial clefts is reinforced.
Abstract: Considering that environmental risk factors substantially contribute to the etiology of orofacial clefts and that knowledge about the characteristics and comorbidities associated with oral clefts is fundamental to promoting better quality of life, this study aimed to describe the risk factors, main characteristics, and comorbidities of a group of patients with cleft lip and/or cleft palate (CL/P) from Rio Grande do Norte (RN), Brazil. Data were obtained from 173 patients with CL/P using a form from the Brazilian database on Orofacial Clefts. Most patients were male with cleft lip and palate and had a normal size and weight at birth; presented few neonatal intercurrent events; and had anemia and respiratory and cardiovascular diseases as main associated comorbidities. They also required timely surgical rehabilitation and multidisciplinary care to stimulate their neuropsychomotor development. In addition, a high frequency of familial recurrence and of parental consanguinity was evidenced in the studied population, especially for the cleft lip and cleft palate type. Other relevant findings were the considerable maternal exposure to alcohol, infections, smoking, and hypertension, as well as low supplementation with vitamins and minerals and deliberate consumption of analgesics, antibiotics, and antihypertensives during pregnancy. Characterization of the CL/P patient profile is essential for the planning of health services and integration among the health professionals involved in the diagnosis and treatment of these malformations. Our results reinforce the need for additional research to confirm the association between environmental factors and the development of orofacial clefts.
TL;DR: The objective of this review was to analyze and discuss the current literature regarding the connections among these three factors-systemic diseases, endodontic infection, and endodentic dental materials-and determine how these connections may interfere in the systemic health status and the endodrontic treatment outcomes, which are represented by periapical wound healing.
Abstract: Endodontic medicine, which addresses the bidirectional relationship between endodontic infections and systemic diseases, has gained prominence in the field of endodontics. There is much evidence showing that while systemic disease may influence the pathogenesis of endodontic infection, endodontic infection can also cause systemic alterations. These alterations include more severe bone resorption and inflammation in the periapical area as well as enhanced systemic disease symptoms. Similarly, many reports have described the impact of systemic diseases on the tissue responses to dental materials. Conversely, the local use of dental materials may show systemic effects in the form of altered production of biomarkers. Thus, studies to better understand the mechanisms related to those connections are extremely important. In this context, the objective of this review was to analyze and discuss the current literature regarding the connections among these three factors-systemic diseases, endodontic infection, and endodontic dental materials-and determine how these connections may interfere in the systemic health status and the endodontic treatment outcomes, which are represented by periapical wound healing.
TL;DR: Pediatric oral and maxillofacial lesions were frequent and showed wide diversity, with the prevalence of mucocele, and knowledge of oral lesions is important for pediatric dentists worldwide, since it provides accurate data for the diagnosis and oral health of children.
Abstract: The aim of this study was to investigate the prevalence of oral and maxillofacial lesions among children from representative regions of Brazil. A retrospective descriptive study was conducted. Biopsy records comprising the period from 2000 to 2015 were obtained from the archives of three Brazilian oral pathology referral centers. A total of 32,506 biopsy specimens were analyzed, and specimens from 1,706 children aged 0-12 years were selected. Gender, age, anatomical location and histopathological diagnosis were evaluated. Descriptive statistics was carried out. Likelihood ratio tests were used to evaluate the association between the categorical variables. The level of significance was set at 0.05. The post-hoc test was used to identify the subgroups that significantly differed from one another, and the Bonferroni correction was applied. A total of 1,706 oral and maxillofacial lesions were diagnosed in pediatric patients, including 51.9% girls. Oral mucocele was the most prevalent reactive/inflammatory lesion (64%). The most commonly affected sites were the lips (34.5%) and mandible (19.9%). A significant association was observed between age and the group of lesions of the oral cavity (p < 0.001), and between age and anatomical location (p < 0.001). Pediatric oral and maxillofacial lesions were frequent and showed wide diversity, with the prevalence of mucocele. Knowledge of oral lesions is important for pediatric dentists worldwide, since it provides accurate data for the diagnosis and oral health of children.
TL;DR: It was determined that the irrigation solutions were cytotoxic, depending on the dose and time, andNaOCl was the most toxic solution after both 4 and 24 h of exposure (p < 0.05).
Abstract: The objective of this study was to evaluate and compare the cytotoxicity and genotoxicity on human fibroblast cell lines of sodium hypochlorite (NaOCl), chitosan and propolis as root canal irrigating solutions. Human fibroblast cells were exposed to chitosan, propolis and NaOCl for 4 and 24 h. Cell viability was assessed by 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide, and oxidative DNA damage was assessed by determination of 8-hydroxydeoxyguanosine (8-OHdG) level with an ELISA kit. The data of cell cytotoxicity were analysed statistically using a test of one-way analysis of variance at a significance level of p < 0.05. In the NaOCI group, the 8-OHdG level was higher than in the chitosan group, but there was no statistical difference when compared with the other groups (p < 0.05). It was determined that the irrigation solutions were cytotoxic, depending on the dose and time. NaOCl was the most toxic solution after both 4 and 24 h of exposure (p < 0.05). Chitosan and propolis may be alternatives to NaOCl for irrigation solutions, because they are both less toxic and produce less oxidative DNA damage.
TL;DR: Comprehensive periodontal treatment during pregnancy can reduce the negative impacts in OHRQoL, and both groups showed significant reduction in OHIP-14 scores.
Abstract: The aim of the present study was to compare negative impacts of oral conditions in Oral Heath Related Quality of Life (OHRQoL) assessed by the Oral Health Impact Profile-14 (OHIP-14) scores in pregnant women receiving or not comprehensive periodontal treatment. This randomized controlled clinical trial included pregnant women aged between 18 and 35 years old. Participants were randomized in a test group with 96 and a control group with 114 women. Patients in the test group received comprehensive periodontal treatment, supra and subgingival scaling and root-planning and periodontal maintenance appointments. The OHIP-14 was applied before and after treatment. The primary outcome was changes in OHIP-14 scores after follow-up period. The impact of having received or not comprehensive periodontal treatment on the change of the OHIP-14 scores was also investigated. Both groups showed significant reduction in OHIP-14 scores and effect size for the test group was 0.60 and 0.36 for the control group. Multinomial logistic regression analysis showed that participants of the control group had 5.9-fold odds (CI 95% 1.88-18.52) of worsening in OHIP-14 scores and their perception of oral conditions in relation to test group. Comprehensive periodontal treatment during pregnancy can reduce the negative impacts in OHRQoL.