IEEE Antennas and Propagation Magazine 

About: IEEE Antennas and Propagation Magazine is an academic journal published by Institute of Electrical and Electronics Engineers. The journal publishes majorly in the area(s): Antenna (radio) & Computer science. It has an ISSN identifier of 1045-9243. Over the lifetime, 2731 publications have been published receiving 75997 citations. The journal is also known as: Antennas & propagation magazine & AP-S magazine.

An Overview of the Theory and Applications of Metasurfaces: The Two-Dimensional Equivalents of Metamaterials

Abstract: Metamaterials are typically engineered by arranging a set of small scatterers or apertures in a regular array throughout a region of space, thus obtaining some desirable bulk electromagnetic behavior. The desired property is often one that is not normally found naturally (negative refractive index, near-zero index, etc.). Over the past ten years, metamaterials have moved from being simply a theoretical concept to a field with developed and marketed applications. Three-dimensional metamaterials can be extended by arranging electrically small scatterers or holes into a two-dimensional pattern at a surface or interface. This surface version of a metamaterial has been given the name metasurface (the term metafilm has also been employed for certain structures). For many applications, metasurfaces can be used in place of metamaterials. Metasurfaces have the advantage of taking up less physical space than do full three-dimensional metamaterial structures; consequently, metasurfaces offer the possibility of less-lossy structures. In this overview paper, we discuss the theoretical basis by which metasurfaces should be characterized, and discuss their various applications. We will see how metasurfaces are distinguished from conventional frequency-selective surfaces. Metasurfaces have a wide range of potential applications in electromagnetics (ranging from low microwave to optical frequencies), including: (1) controllable “smart” surfaces, (2) miniaturized cavity resonators, (3) novel wave-guiding structures, (4) angular-independent surfaces, (5) absorbers, (6) biomedical devices, (7) terahertz switches, and (8) fluid-tunable frequency-agile materials, to name only a few. In this review, we will see that the development in recent years of such materials and/or surfaces is bringing us closer to realizing the exciting speculations made over one hundred years ago by the work of Lamb, Schuster, and Pocklington, and later by Mandel'shtam and Veselago.

The fast multipole method for the wave equation: a pedestrian prescription

Abstract: A practical and complete, but not rigorous, exposition of the fact multiple method (FMM) is provided. The FMM provides an efficient mechanism for the numerical convolution of the Green's function for the Helmholtz equation with a source distribution and can be used to radically accelerate the iterative solution of boundary-integral equations. In the simple single-stage form presented here, it reduces the computational complexity of the convolution from O(N/sup 2/) to O(N/sup 3/2/), where N is the dimensionality of the problem's discretization. >

Using the matrix pencil method to estimate the parameters of a sum of complex exponentials

Abstract: The approximation of a function by a sum of complex exponentials is a problem that is at least two centuries old. Fundamentally, all techniques discussed in this article proceed from using the same sequence of data samples and vary only, but importantly, in how those samples are used in achieving the parameter estimation. All of these techniques, in other words, seek the same quantitative parameters to represent the sampled data, but use different routes to get there. The techniques for estimating the parameters are either linear or nonlinear. The linear techniques are emphasized in this presentation. In particular, the matrix pencil method is described, which is more robust to noise in the sampled data. The matrix pencil approach has a lower variance of the estimates of the parameters of interest than a polynomial-type method (Prony's method belongs to this category), and is also computationally more efficient. A bandpass version of the matrix pencil can be implemented in hardware, utilizing an AT&T DSP32C chip operating in real time. A copy of the computer program implementing the matrix pencil technique is given in the appendix. >

An overview of fractal antenna engineering research

Abstract: Recent efforts by several researchers around the world to combine fractal geometry with electromagnetic theory have led to a plethora of new and innovative antenna designs. In this report, we provide a comprehensive overview of recent developments in the rapidly growing field of fractal antenna engineering. Fractal antenna engineering research has been primarily focused in two areas: the first deals with the analysis and design of fractal antenna elements, and the second concerns the application of fractal concepts to the design of antenna arrays. Fractals have no characteristic size, and are generally composed of many copies of themselves at different scales. These unique properties of fractals have been exploited in order to develop a new class of antenna-element designs that are multi-band and/or compact in size. On the other hand, fractal arrays are a subset of thinned arrays, and have been shown to possess several highly desirable properties, including multi-band performance, low sidelobe levels, and the ability to develop rapid beamforming algorithms based on the recursive nature of fractals. Fractal elements and arrays are also ideal candidates for use in reconfigurable systems. Finally, we provide a brief summary of recent work in the related area of fractal frequency-selective surfaces.

A survey of various propagation models for mobile communication

Abstract: In order to estimate the signal parameters accurately for mobile systems, it is necessary to estimate a system's propagation characteristics through a medium. Propagation analysis provides a good initial estimate of the signal characteristics. The ability to accurately predict radio-propagation behavior for wireless personal communication systems, such as cellular mobile radio, is becoming crucial to system design. Since site measurements are costly, propagation models have been developed as a suitable, low-cost, and convenient alternative. Channel modeling is required to predict path, loss and to characterize the impulse response of the propagating channel. The path loss is associated with the design of base stations, as this tells us how much a transmitter needs to radiate to service a given region. Channel characterization, on the other hand, deals with the fidelity of the received signals, and has to do with the nature of the waveform received at a receiver. The objective here is to design a suitable receiver that will receive the transmitted signal, distorted due to the multipath and dispersion effects of the channel, and that will decode the transmitted signal. An understanding of the various propagation models can actually address both problems. This paper begins with a review of the information available on the various propagation models for both indoor and outdoor environments. The existing models can be classified into two major classes: statistical models and site-specific models. The main characteristics of the radio channel - such as path loss, fading, and time-delay spread - are discussed. Currently, a third alternative, which includes many new numerical methods, is being introduced to propagation prediction. The advantages and disadvantages of some of these methods are summarized. In addition, an impulse-response characterization for the propagation path is also presented, including models for small-scale fading, Finally, it is shown that when two-way communication ports can be defined for a mobile system, it is possible to use reciprocity to focus the energy along the direction of an intended user without any explicit knowledge of the electromagnetic environment in which the system is operating, or knowledge of the spatial locations of the transmitter and the receiver.