Showing papers in "Journal of Environmental Science and Health Part A-toxic\/hazardous Substances & Environmental Engineering in 2016"

Human health risks of formaldehyde indoor levels: An issue of concern

Abstract: Formaldehyde is a carcinogenic substance for humans. Exposure to formaldehyde may also cause eye and respiratory tract irritation, as well as skin sensitization. The main indoor sources of formaldehyde are wood-pressed products, insulation materials, paints, varnishes, household cleaning products and cigarettes, among others. Although this chemical is a well-known indoor pollutant, data on indoor concentrations of formaldehyde are still scarce in some countries. In February 2014, 10 homes in Catalonia, Spain, were randomly selected to collect indoor (bedroom and living room) and outdoor air samples. Ten additional samples were also collected at different workplaces (e.g., offices, shops, classrooms, etc.). Formaldehyde air levels found in homes ranged from 10.7 to 47.7 μg m(-3), from 9.65 to 37.2 μg m(-3), and from 0.96 to 3.37 μg m(-3) in bedrooms, living rooms, and outdoors, respectively. Meanwhile, at workplaces, indoor air levels ranged from 5.86 to 40.4 μg m(-3). These levels are in agreement with data found in the scientific literature. Non-carcinogenic risks were above the threshold limit (HQ > 1), and carcinogenic risks were not acceptable either (>10(-4)). Despite the current study limitations, the results confirm that formaldehyde indoor levels are a matter of health concern, which must be taken into account by policymakers and regulatory bodies.

The cytotoxicity of organophosphate flame retardants on HepG2, A549 and Caco-2 cells.

Abstract: In order to elucidate the cytotoxicity of organophosphate flame retardants (OPFRs), three human in vitro models, namely the HepG2 hepatoma cells, the A549 lung cancer cells and the Caco-2 colon cancer cells, were chosen to investigate the toxicity of triphenyl phosphate (TPP), tributylphosphate (TBP), tris(2-butoxyexthyl) phosphate (TBEP) and tris (2-chloroisopropyl) phosphate (TCPP). Cytotoxicity was assayed in terms of cell viability, DNA damage status, reactive oxygen species (ROS) level and lactate dehydrogenase (LDH) leakage. The results showed that all these four OPFRs could inhibit cell viability, overproduce ROS level, induce DNA lesions and increase the LDH leakage. In addition, the toxic effects of OPFRs in Caco-2 cells were relatively severer than those in HepG2 and A549 cells, which might result from some possible mechanisms apart from oxidative stress pathway. In conclusion, TBP, TPP, TBEP and TCPP could induce cell toxicity in various cell lines at relatively high concentrations as evidenced by suppression of cell viability, overproduction of ROS, induction of DNA lesions and increase of LDH leakage. Different cell types seemed to have different sensitivities and responses to OPFRs exposure, as well as the underlying potential molecular mechanisms.

Electrokinetic treatment of an agricultural soil contaminated with heavy metals.

Abstract: The high organic matter content in agricultural soils tends to complex and retain contaminants such as heavy metals. Electrokinetic remediation was tested in an agricultural soil contaminated with Co(+2), Zn(+2), Cd(+2), Cu(+2), Cr(VI), Pb(+2) and Hg(+2). The unenhanced electrokinetic treatment was not able to remove heavy metals from the soil due to the formation of precipitates in the alkaline environment in the soil section close to the cathode. Moreover, the interaction between metals and organic matter probably limited metal transportation under the effect of the electric field. Citric acid and ethylenediaminetetraacetic acid (EDTA) were used in the catholyte as complexing agents in order to enhance the extractability and removal of heavy metals from soil. These complexing agents formed negatively charged complexes that migrated towards the anode. The acid front electrogenerated at the anode favored the dissolution of heavy metals that were transported towards the cathode. The combined effect of the soil pH and the complexing agents resulted in the accumulation of heavy metals in the center of the soil specimen.

Batch anaerobic co-digestion of waste activated sludge and microalgae (Chlorella sorokiniana) at mesophilic temperature

Abstract: The microalgae Chlorella sorokiniana are used as co-substrate for waste activated sludge (WAS) anaerobic digestion. The specific objective of this research was to evaluate the feasibility of improving methane production from anaerobic digestion of WAS in co-digestion with this microalga, based on an optimized mixture percentage. Thus, the anaerobic co-digestion of both substrates aims to overcome the drawbacks of the anaerobic digestion of single WAS, simultaneously improving its management. Different co-digestion mixtures (0% WAS-100% microalgae; 25% WAS-75% microalgae; 50% WAS-50% microalgae; 75% WAS-25% microalgae; 100% WAS-0% microalgae) were studied. The highest methane yield (442 mL CH4/g VS) was obtained for the mixture with 75% WAS and 25% microalgae. This value was 22% and 39% higher than that obtained in the anaerobic digestion of the sole substrates WAS and microalgae, respectively, as well as 16% and 25% higher than those obtained for the co-digestion mixtures with 25% WAS and 75% micr...

Treatment of laundrette wastewater using Starbon and Fenton's reagent

Abstract: The use of grey water for a variety of purposes is gaining increased popularity as a means of preserving scarce freshwater resources. In this work, catalytic oxidation over Fenton's reagent and adsorption techniques using Starbon (mesoporous material derived from polysaccharides) has been applied. These novel techniques are used as an alternative to already studied treatments of grey water such as filtration and/or biological processes. In this study, grey water, collected from a commercial laundrette, has been used. Treatment efficiency was determined by changes in the chemical oxygen demand (COD) of the grey water. Experiments using Fenton's reagent at optimum conditions of Fe(3+) = 40 mg L(-1); H2O2 = 400 mg L(-1) and pH 3 were very successful, resulting in a 95% COD removal after 15 min. Treatment with Starbon adsorption was also effective, reaching up to 81% COD removal at pH 3 within 1 h. The combined treatment with Fenton's reagent and Starbon resulted in a 93% COD removal at a significantly reduced concentration of Fenton's reagent compared to the treatment with solo Fenton's reagent. This lower chemical dose has the advantage of reducing costs and lowering sludge generation.

Removal of Acid Black 194 dye from water by electrocoagulation with aluminum anode

Abstract: Application of an electrocoagulation process (EC) for the elimination of AB194 textile dye from synthetic and textile wastewater (effluent) contaminated with AB194 dye, was carried out using aluminum anodes at two different initial pH values. Tafel studies in the presence and absence of the dye were performed. The aluminum species formed during the electrolysis were quantified by atomic absorption, and the flocs formed in the process were analyzed by HPLC-MS. Complete removal of AB194 from 1.0 L of solution was achieved applying low densities current at initial pH values of 4.0 and 8.0. The removal of AB194 by EC was possible with a short electrolysis time, removing practically 100% of the total organic carbon content and chemical oxygen demand. The final result was completely discolored water lacking dye and organic matter. An effluent contaminated with 126 mg L(-1) AB194 dye from a Chilean textile industry was also treated by EC under optimized experimental conditions, yielding discolored water and considerably decreasing the presence of organic compounds (dye + dyeing additives), with very low concentrations of dissolved Al(3+). Analysis of flocs showed the presence of the original dye without changes in its chemical structure.

Hexavalent chromium removal and bioelectricity generation by Ochrobactrum sp. YC211 under different oxygen conditions

Abstract: Bioremediation is an environmentally friendly method of reducing heavy metal concentration and toxicity. A chromium-reducing bacterial strain, isolated from the vicinity of an electroplate factory, was identified as Ochrobactrum sp. YC211. The efficiency and capacity per time of Ochrobactrum sp. YC211 for hexavalent chromium (Cr(VI)) removal under anaerobic conditions were superior to those under aerobic conditions. An acceptable removal efficiency (96.5 ± 0.6%) corresponding to 30.2 ± 0.8 mg-Cr (g-dry cell weight-h)(-1) was achieved by Ochrobactrum sp. YC211 at 300 mg L(-1) Cr(VI). A temperature of 30°C and pH 7 were the optimal parameters for Cr(VI) removal. By examining reactivated cells, permeabilized cells, and cell-free extract, we determined that Cr(VI) removal by Ochrobactrum sp. YC211 under anaerobic conditions mainly occurred in the soluble fraction of the cell and can be regarded as an enzymatic reaction. The results also indicated that an Ochrobactrum sp. YC211 microbial fuel cell (MFC) with an anaerobic anode was considerably superior to that with an aerobic anode in bioelectricity generation and Cr(VI) removal. The maximum power density and Cr(VI) removal efficiency of the MFC were 445 ± 3.2 mW m(-2) and 97.2 ± 0.3%, respectively. Additionally, the effects of coexisting ions (Cu(2+), Zn(2+), Ni(2+), SO4(2-), and Cl(-)) in the anolyte on the MFC performance and Cr(VI) removal were nonsignificant (P > 0.05). To our knowledge, this is the first report to compare Cr(VI) removal by different cells and MFC types under aerobic and anaerobic conditions.

Characterization of the COD removal, electricity generation, and bacterial communities in microbial fuel cells treating molasses wastewater.

Abstract: The chemical oxygen demand (COD) removal, electricity generation, and microbial communities were compared in 3 types of microbial fuel cells (MFCs) treating molasses wastewater. Single-chamber MFCs without and with a proton exchange membrane (PEM), and double-chamber MFC were constructed. A total of 10,000 mg L−1 COD of molasses wastewater was continuously fed. The COD removal, electricity generation, and microbial communities in the two types of single-chamber MFCs were similar, indicating that the PEM did not enhance the reactor performance. The COD removal in the single-chamber MFCs (89–90%) was higher than that in the double-chamber MFC (50%). However, electricity generation in the double-chamber MFC was higher than that in the single-chamber MFCs. The current density (80 mA m−2) and power density (17 mW m−2) in the double-chamber MFC were 1.4- and 2.2-times higher than those in the single-chamber MFCs, respectively. The bacterial community structures in single- and double-chamber MFCs were al...

Oil recovery from petroleum sludge through ultrasonic assisted solvent extraction

Abstract: The effect of ultrasonic assisted extraction (UAE) process on oil recovery from refinery oily sludge was examined in this study. Two types of UAE treatment including UAE probe (UAEP) system and UAE bath (UAEB) system were investigated. Their oil recovery efficiencies were compared to that of mechanical shaking extraction (MSE). Three solvents including cyclohexane (CHX), ethyl acetate (EA), and methyl ethyl ketone (MEK) were examined as the extraction solvents. The influence of experimental factors on oil and solvent recovery was investigated using an orthogonal experimental design. Results indicated that solvent type, solvent-to-sludge (S/S) ratio, and treatment duration could have significant effects on oil recovery in UAE treatment. Under the optimum conditions, UAEP treatment can obtain an oil recovery of 68.8% within 20 s, which was higher than that (i.e., 62.0%) by MSE treatment after 60 min’ extraction. UAEB treatment can also obtain a promising oil recovery within shorter extraction durati...

Pilot aerobic membrane bioreactor and nanofiltration for municipal landfill leachate treatment

Abstract: The purpose of this article is to evaluate the integration of the air stripping, membrane bioreactor (MBR) and nanofiltration (NF) processes for the treatment of landfill leachate (LFL). Pretreatment by air stripping, without adjustment of pH, removed 65% of N-NH3 present in LFL. After pretreatment, the effluent was treated in MBR obtaining 44% of COD removal, and part of the N-NH3 was converted to nitrite and nitrate, which was later removed in the post-treatment. Nanofiltration was shown to be an effective process to improve the removal of organic compounds, the high toxicity present in LFL and nitrite and nitrate generated in the MBR. The system (air stripping + MBR + nanofiltration) obtained great efficiency of removal in most parameters analyzed, with overall removal of COD, ammonia, color and toxicity approximately 88, 95, 100 and 100%, respectively. By this route, treated landfill leachate may be reused at the landfill as water for dust arrestment and also as earth work on construction sites.

Detection of azo dyes and aromatic amines in women undergarment

Abstract: Women are exposed to several chemical additives including azo dyes that exist in textile materials, which are a potential health hazard for consumers Our objective was to analyze suspected carcinogenic azo dyes and their degradation aromatic amines in women underwear panties using a fast and simple method for quantification Here, we evaluated 120 different samples of women underwear for their potential release of aromatic amines to the skin Seventy-four samples yielded low level mixtures of aromatic amines; however eighteen samples were found to produce greater than 200 mg/kg (ppm) of aromatic amines Azo dyes in these 18 samples were extracted from the fabrics and analyzed by reverse phase thin layer chromatography in tandem with atmospheric pressure chemical ionization mass spectrometry Eleven azo dyes were identified based on their mass spectral data and the chemical structure of the aromatic amine produced from these samples We demonstrate that planar chromatography and mass spectrometry can be really helpful in confirming the identity of the azo dyes, offering highly relevant molecular information of the responsible compounds in the fabrics With the growing concern about the consumer goods, analysis of aromatic amines in garments has become a highly important issue

Fungal biodegradation of anthracene-polluted cork: A comparative study.

Abstract: The efficiency of cork waste in adsorbing aqueous polycyclic aromatic hydrocarbons (PAHs) has been previously reported. Biodegradation of contaminated cork using filamentous fungi could be a good alternative for detoxifying cork to facilitate its final processing. For this purpose, the degradation efficiency of anthracene by three ligninolytic white-rot fungi (Phanerochaete chrysosporium, Irpex lacteus and Pleurotus ostreatus) and three non-ligninolytic fungi which are found in the cork itself (Aspergillus niger, Penicillium simplicissimum and Mucor racemosus) are compared. Anthracene degradation by all fungi was examined in solid-phase cultures after 0, 16, 30 and 61 days. The degradation products of anthracene by P. simplicissimum and I. lacteus were also identified by GC-MS and a metabolic pathway was proposed for P. simplicissimum. Results show that all the fungi tested degraded anthracene. After 61 days of incubation, approximately 86%, 40%, and 38% of the initial concentration of anthracene (i.e., 100 µM) was degraded by P. simplicissimum, P. chrysosporium and I. lacteus, respectively. The rest of the fungi degraded anthracene to a lesser extent (<30%). As a final remark, the results obtained in this study indicate that P. simplicissimum, a non-ligninolytic fungi characteristic of cork itself, could be used as an efficient degrader of PAH-contaminated cork.

Synthesis and performance evaluation of Al/Fe oxide coated diatomaceous earth in groundwater defluoridation: Towards fluorosis mitigation.

Abstract: The quest to reduce fluoride in groundwater to WHO acceptable limit of 1.5 mg/L to prevent diseases such as teeth mottling and skeletal fluorosis was the motivation for this study. Al/Fe oxide-modified diatomaceous earth was prepared and its defluoridation potential evaluated by batch method. The sorbent with pHpzc 6.0 ± 0.2 is very reactive. The maximum 82.3% fluoride removal attained in 50 min using a dosage of 0.3 g/100 mL in 10 mg/L fluoride was almost attained within 5 min contact time; 81.3% being the percent fluoride removal at 5 min contact time. The sorbent has a usage advantage of not requiring solution pH adjustment before it can exhibit its fluoride removal potential. A substantial amount of fluoride (93.1%) was removed from solution when a sorbent dosage of 0.6 g/100 mL was contacted with 10 mg/L fluoride solution for 50 min at a mixing rate of 200 rpm. The optimum adsorption capacity of the adsorbent was 7.633 mg/g using a solution containing initially 100 mg/L fluoride. The equilibr...

Prenatal exposure to endocrine disrupting chemicals and birth weight—A prospective cohort study

Abstract: Prenatal exposure to endocrine disrupting chemicals may affect fetal development through disruption of hormonal actions and epigenetic modifications, potentially predisposing individuals to later on-set health risks, such as obesity. The objective of this study was to determine associations between biological exposure markers of various endocrine disrupting chemicals and birth weight in a newly established, prospective mother-child cohort in the Netherlands. Birth weight (n = 91) was obtained from birth records, and exposure to dichlorodiphenyldichloroethylene (DDE), three di-2-ethylhexyl phthalate (DEHP) metabolites, polychlorinated biphenyl-153, perfluorooctanesulfonic acid (PFOS), and perfluorooctanoic acid (PFOA) was determined in cord plasma. For DDE, exposure was also measured in breast milk. Linear regression analysis was used to determine associations between compounds and birth weight, which were stratified for gender and adjusted for a priori defined covariates. Increased exposure to DDE...

Environmental analysis of the life cycle emissions of 2-methyl tetrahydrofuran solvent manufactured from renewable resources

Abstract: An environmental analysis has been conducted to determine the cradle to gate life cycle emissions to manufacture the green solvent, 2-methyl tetrahydrofuran. The solvent is considered a greener chemical since it can be manufactured from renewable resources with a lower life cycle footprint. Analyses have been performed using different methods to show greenness in both its production and industrial use. This solvent can potentially be substituted for other ether and chlorinated solvents commonly used in organometallic and biphasic reactions steps in pharmaceutical and fine chemical syntheses. The 2-methyl tetrahydrofuran made from renewable agricultural by-products is marketed by Penn A Kem under the name ecoMeTHF™. The starting material, 2-furfuraldehyde (furfural), is produced from corn cob waste by converting the available pentosans by acid hydrolysis. An evaluation of each step in the process was necessary to determine the overall life cycle and specific CO2 emissions for each raw material/intermediate produced. Allocation of credits for CO2 from the incineration of solvents made from renewable feedstocks significantly reduced the overall carbon footprint. Using this approach, the overall life cycle emissions for production of 1 kg of ecoMeTHF™ were determined to be 0.191 kg, including 0.150 kg of CO2. Life cycle emissions generated from raw material manufacture represents the majority of the overall environmental impact. Our evaluation shows that using 2-methyl tetrahydrofuran in an industrial scenario results in a 97% reduction in emissions, when compared to typically used solvents such as tetrahydrofuran, made through a conventional chemical route.

Distribution of trace elements in sediment and soil from river Vardar Basin, Macedonia/Greece.

Abstract: A systematic study was carried out to investigate the distribution of 59 elements in the sediment and soil samples collected from the river Vardar (Republic of Macedonia and Greece) and its major tributaries. The samples were collected from 28 sampling sites. Analyses were performed by inductively coupled plasma-mass spectrometry. R-mode factor analysis (FA) was used to identify and characterise element associations. Seven associations of elements were determined by the method of multivariate statistics. Every factor (Factors 1-3 and 6 and 7 as geogenic and Factors 4 and 5 as anthropogenic associations of elements) are examined and explained separately. The distribution of various elements showed that there is a presence of anthropogenic elements (Ag, Cd, Cu, Ge, Pb, Sn and Zn) introduced in the river sediments and soils from the mining, metallurgical, industrial and agricultural activities in Vardar River Basin, which covers most of the Republic of Macedonia and Central-northern part of Greece.

Chemotherapeutic potential of quercetin on human bladder cancer cells.

Abstract: In an effort to improve local bladder cancer control, we investigated the cytotoxic and genotoxic effects of quercetin on human bladder cancer T24 cells. The cytotoxic effect of quercetin against T24 cells was examined by MTT test, clonogenic assay as well as DNA damaging effect by comet assay. In addition, the cytotoxic effect of quercetin on the primary culture of papillary urothelial carcinoma (PUC), histopathological stage T1 of low- or high-grade tumours, was investigated. Our analysis demonstrated a high correlation between reduced number of colony and cell viability and an increase in DNA damage of T24 cells incubated with quercetin at doses of 1 and 50 µM during short term incubation (2 h). At all exposure times (24, 48 and 72 h), the efficacy of quercetin, administered at a 10× higher dose compared to T24 cells, was statistically significant (P < 0.05) for the primary culture of PUC. In conclusion, our study suggests that quercetin could inhibit cell proliferation and colony formation of ...

Perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) contamination from textiles

Abstract: The goals of this study were to determine the concentrations of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) in textiles and to determine PFOS and PFOA contamination in textile washing water. Quantification analysis was performed by high performance liquid chromatography coupled with tandem mass spectrometry. Analysis of 32 textile samples by methanol extraction revealed that the average concentrations of PFOS and PFOA were 0.18 µg m(-2) (0.02 to 0.61 µg m(-2)) and 2.74 µg m(-2) (0.31 to 14.14 µg m(-2)), respectively. Although the average concentration of PFOS found in textile samples was below European Union (EU) Commission regulations (<1 µg m(-2)), the average concentration of PFOA was 2.74 µg m(-2), and 68.75% of textile samples had PFOA concentrations exceeding 1 µg m(-2). Thus, based on these results, the concentration of PFOA in products should also be regulated. Experiments on PFOS and PFOA leaching into washing water were conducted. The maximum concentrations of PFOS and PFOA were measured after the first washing; the concentrations gradually decreased with each subsequent washing. PFOS and PFOA migrated from textiles and were released into the environment, with disappearance percentages of 29.8% for PFOS and 99% for PFOA. The data presented in this study showed that textiles could be a significant direct and indirect source of PFOS and PFOA exposure for both humans and the environment.

Bioaccumulation of metallic trace elements and organic pollutants in marine sponges from the South Brittany Coast, France.

Abstract: The purpose of this study was to compare the accumulation of metallic and organic pollutants in marine sponges with the oyster Crassostrea gigas used as sentinel species. The concentrations of 12 Metallic Trace Elements (MTEs), 16 Polycyclic Aromatic Hydrocarbons (PAHs), 7 PolyChlorinated Biphenyls (PCBs), and 3 organotin derivatives were measured in 7 marine sponges collected in the Etel River (South Brittany, France). Results indicated Al, Co, Cr, Fe, Pb, and Ti particularly accumulated in marine sponges such as Hymeniacidon perlevis and Raspailia ramosa at higher levels compared to oysters. At the opposite, Cu and Zn accumulated significantly at higher concentrations in oysters. Among PAHs analyzed, benzo(a)pyrene bioaccumulated in H. perlevis at levels up to 17-fold higher than in oysters. In contrast, PCBs bioaccumulated preferentially in oysters. Significant differences exist in the abilities of marine phyla and sponge species to accumulate organic and metallic pollutants however, among the few sponge species studied, H. perlevis showed impressive bioaccumulation properties. The use of this species as bioindicator and/or bioremediator near shellfish farming areas is also discussed.

Optimization of methane production in anaerobic co-digestion of poultry litter and wheat straw at different percentages of total solid and volatile solid using a developed response surface model

Abstract: Poultry litter (PL) can be good feedstock for biogas production using anaerobic digestion. In this study, methane production from batch co-digestion of PL and wheat straw (WS) was investigated for two factors, i.e., total solid (2%, 5%, and 10%) and volatile solid (0, 25, and 50% of WS), constituting a 3 × 3 experimental design. The results showed that the maximum specific methane volume [197 mL (g VS)(‑1)] was achieved at 50% VS from WS at 5% TS level. It was estimated that the inhibitory threshold of free ammonia was about 289 mg L(--1), beyond which reduction of methanogenic activity by at least 54% was observed. The specific methane volume and COD removal can be expressed using two response surface models (R(2) = 0.9570 and 0.9704, respectively). Analysis of variance of the experimental results indicated that the C/N ratio was the most significant factor influencing the specific methane volume and COD removal in the co-digestion of these two materials.

Degradation of the long-resistant pharmaceutical compounds carbamazepine and diatrizoate using mixed microbial culture

Abstract: The microbial degradation of two recalcitrant pharmaceutical compounds, carbamazepine (CBZ) and diatrizoate (DTZ), was studied in laboratory batch experiments. We used a defined mixed microbial culture comprising four distinct microbial species that were previously known to have high decomposition capacity toward recalcitrant substances. Biological decomposition in liquid phase cultures for either CBZ or DTZ, or in a combination of the two, was conducted for 12 days. DTZ and CBZ were degraded by 43.2% and 60%, respectively from an initial concentration of 100 µg L(-1). When degradation was assessed using a mixture of the two compounds, the initial degradation rates of CBZ and DTZ were lower than those observed in the single-compound study. However, the final cumulative removal efficiency was very similar. The extent of dissolved organic carbon (DOC) removal was correlated with the degradation of the pharmaceuticals.

Anthropogenic pressure in a Portuguese river: Endocrine-disrupting compounds, trace elements and nutrients

Abstract: Natural organic compounds such as phytoestrogens and phytosterols found in various plants, as well as mycotoxins produced by fungi, can be found in aquatic environments. The aim of this study was to investigate the occurrence of three different classes of natural estrogenic compounds, i.e., phytoestrogens, phytosterols and mycotoxins, in estuarine water samples from the Ave River estuary. For that, water samples were collected at five sampling points distributed along the estuary at low tide, during 1 year, processed by solid-phase extraction (SPE) and analyzed by gas chromatography coupled to mass spectrometry (GC-MS). To correlate the presence of phytoestrogens and phytosterols in the estuarine water, local flora was collected on riverside. Trace elements content and physicochemical parameters such as nutrients and dissolved oxygen were also determined seasonally at each sampling point, to give insights for the evaluation of water quality and anthropogenic pressure. Both phytoestrogens and phytosterols showed a seasonal variation, with the highest values observed in spring and summer and the lowest in winter. Daidzein (DAID) was found up to 404.0 ng L(-1) in spring and coumestrol (COUM) was found up to 165.0 ng L(-1) in summer. The mycotoxin deoxynivalenol (DON) was ubiquitously determined with values ranging from 59.5 to 642.4 ng L(-1). Nutrients and metals distribution and concentration varied among sampling stations and seasons. This study revealed for the first time the presence of mycotoxins, various classes of phytoestrogens and stigmasterol (STG) in estuarine water from the Ave River (Portugal), and the evaluation of the water quality confirmed that this estuary is still highly impacted by anthropogenic activities.

Arsenate removal by layered double hydroxides embedded into spherical polymer beads: Batch and column studies.

Abstract: In this study, the performance of poly(layered double hydroxides) [poly(LDHs)] beads as an adsorbent for arsenate removal from aqueous solution was investigated. The poly(LDHs) beads were prepared by immobilizing LDHs into spherical alginate/polyvinyl alcohol (PVA)-glutaraldehyde beads (spherical polymer beads). Batch adsorption studies were conducted to assess the effect of contact time, solution pH, initial arsenate concentrations and co-existing anions on arsenate removal performance. The potential reuse of these poly(LDHs) beads was also investigated. Approximately 79.1 to 91.2% of arsenic was removed from an arsenate solution (50 mg As L(-1)) by poly(LDHs). The adsorption data were well described by the pseudo-second-order kinetics model and the Langmuir isotherm model, and the adsorption capacities of these poly(LDHs) beads at pH 8 were from 1.64 to 1.73 mg As g(-1), as calculated from the Langmuir adsorption isotherm. The adsorption ability of the poly(LDHs) beads decreased by approximately 5-6% after 5 adsorption-desorption cycles. Phosphates markedly decreased arsenate removal. The effect of co-existing anions on the adsorption capacity declined in the following order: HPO4 (2-) >> HCO3 (-) > SO4 (2-) > Cl(-). A fixed-bed column study was conducted with real-life arsenic-containing water. The breakthrough time was found to be from 7 to 10 h. Under optimized conditions, the poly(LDHs) removed more than 82% of total arsenic. The results obtained in this study will be useful for further extending the adsorbents to the field scale or for designing pilot plants in future studies. From the viewpoint of environmental friendliness, the poly(LDHs) beads are a potential cost-effective adsorbent for arsenate removal in water treatment.

Influence of hydraulic retention time and plant species on performance of mesocosm subsurface constructed wetlands during municipal wastewater treatment in super-arid areas

Abstract: A constructed wetland (CW) in arid areas requires special knowledge given the particular climatic conditions. Among other aspects, the Hydraulic Retention Time (HRT) and plant species may be two important design parameters in hyper- and super-arid areas. Therefore, the study aimed to evaluate the influence of both variables in the application of CW in super-arid areas. Two HRT, 3.5 d and 7 d, and plant species classified by their origin: (a) native, Festuca Orthopylla, Cortaderia atacamensis and Schoenoplectus americanus, and (b) foreign, Cyperus papyrus, were evaluated in four Mesocosm Constructed Wetlands (MCW) operated in a super-arid area. The results showed that the HRT significantly increased (α 0.05) on the EC of the effluents. These results suggest that Schoenoplectus americanus would be an ideal candidate species for use in CW with subsurface flow in super-arid areas, with HRT varying between 3.5 d and 7 d.

Properties and cellular effects of particulate matter from direct emissions and ambient sources.

Abstract: The pollution of particulate matter (PM) is of great concern in China and many other developing countries. It is generally recognized that the toxicity of PM is source and property dependent. However, the relationship between PM properties and toxicity is still not well understood. In this study, PM samples from direct emissions of wood, straw, coal, diesel combustion, cigarette smoking and ambient air were collected and characterized for their physicochemical properties. Their expression of intracellular reactive oxygen species (ROS) and levels of inflammatory cytokines (i.e., tumor necrosis factor-α (TNF-α)) was measured using a RAW264.7 cell model. Our results demonstrated that the properties of the samples from different origins exhibited remarkable differences. Significant increases in ROS were observed when the cells were exposed to PMs from biomass origins, including wood, straw and cigarettes, while increases in TNF-α were found for all the samples, particularly those from ambient air. The most important factor associated with ROS generation was the presence of water-soluble organic carbon, which was extremely abundant in the samples that directly resulted from biomass combustion. Metals, endotoxins and PM size were the most important properties associated with increases in TNF-α expression levels. The association of the origins of PM particles and physicochemical properties with cytotoxic properties is illustrated using a cluster analysis.

The effect of acidic pH and presence of metals as parameters in establishing a sulfidogenic process in anaerobic reactor.

Abstract: The successful use of anaerobic reactors for bioremediation of acid mine drainage has been shown in systems with neutral pH However, the choice of an efficient and suitable process for such wastewater must consider the capability of operating at acidic pH and in the presence of metals This work studies the performance of an anaerobic batch reactor, under conditions of varying initial pH for its efficiencies in sulfate removal and metal precipitation from synthetic acid mine drainage The chemical oxygen demand/sulfate (COD/SO42−) ratio used was 100, with ethanol chosen as the only energy and carbon source The initial pH of the synthetic drainage was progressively set from 70 to 40 to make it as close as possible to that of real acid mine drainage Metals were also added starting with iron, zinc, and finally copper The effectiveness of sulfate and COD removal from the synthetic acid mine drainage increased as the initial pH was reduced The sulfate removal increased from 385 ± 37% to 522

Health impacts due to particulate air pollution in Volos City, Greece.

Abstract: There is great consensus among the scientific community that suspended particulate matter is considered as one of the most harmful pollutants, particularly the inhalable particulate matter with aerodynamic diameter less than 10 μm (PM10) causing respiratory health problems and heart disorders. Average daily concentrations exceeding established standard values appear, among other cases, to be the main cause of such episodes, especially during Saharan dust episodes, a natural phenomenon that degrades air quality in the urban area of Volos. In this study the AirQ2.2.3 model, developed by the World Health Organization (WHO) European Center for Environment and Health, was used to evaluate adverse health effects by PM10 pollution in the city of Volos during a 5-year period (2007-2011). Volos is a coastal medium size city in the Thessaly region. The city is located on the northern side of the Gulf of Pagassitikos, on the east coast of Central Greece. Air pollution data were obtained by a fully automated monitoring station, which was established by the Municipal Water Supply and Sewage Department in the Greater Area of Volos, located in the centre of the city. The results of the current study indicate that when the mean annual PM10 concentration exceeds the corresponding European Union (EU) threshold value, the number of hospital admissions for respiratory disease (HARD) is increased by 25% on average. There is also an estimated increase of about 2.5% in HARD compared to the expected annual HARD cases for Volos. Finally, a strong correlation was found between the number of days exceeding the EU daily threshold concentration ([PM10] ≥ 50 μg m(-3)) and the annual HARD cases.

Effect of loading types on performance characteristics of a trickle-bed bioreactor and biofilter during styrene/acetone vapor biofiltration

Abstract: A 2:1 (w/w) mixture of styrene (STY) and acetone (AC) was subjected to lab-scale biofiltration under varied loading in both a trickle bed reactor (TBR) and biofilter (BF) to investigate substrate interactions and determine the limits of biofiltration efficiency of typical binary air pollutant mixtures containing both hydrophobic and polar components. A comparison of the STY/AC mixture degradation in the TBR and BF revealed higher pollutant removal efficiencies and degradation rates in the TBR, with the pollutant concentrations increasing up to the overloading limit. The maximum styrene degradation rates were 12 and 8 gc m−3 h−1 for the TBR and BF, respectively. However, the order of performance switched in favor of the BF when the loading was conducted by increasing air flow rate while keeping the inlet styrene concentration (Cin) constant in contrast to loading by increasing Cin. This switch may be due to a drastic difference in the effective surface area between these two reactors, so the biofil...

Effects of porous media, macrophyte type and hydraulic retention time on the removal of organic load and micropollutants in constructed wetlands.

Abstract: The performance of horizontal subsurface flow constructed wetlands in the removal of micropollutants from a wastewater treatment plant effluent was evaluated at mesocosm level. Fifteen mesocosms were studied following a modified Latin Square experimental design with six additional points. Three variables at three levels were studied: porous media -PM- (river gravel, fine volcanic gravel and coarse volcanic gravel), macrophyte type -M- (Thypa latiffolia, Phragmites australis, and Cyperus papyrus) and hydraulic retention time -HRT- (1, 3 and 5 days). As response variables the removal percentages of the total organic load of the effluent (BOD5) and the loads of several micropollutants (caffeine, galaxolide, tonalide, alkylphenols and their monoethoxylates and diethoxylates, methyl dihydrojasmonate, sunscreen UV-15 and parsol) were used. The results showed that the systems remove between 70% and 75% of the organic load and that all the micropollutants were degraded at different extents, from 55% to 99%. The HRT was the variable that showed major effects on the treatment process, while M and PM showed no statistically significant differences in the used experimental conditions.

Treatment of petroleum drill cuttings using bioaugmentation and biostimulation supplemented with phytoremediation

Abstract: This study sought to compare the effectiveness of bioaugmentation and biostimulation, as well as the combination of both techniques, supplemented with phytoremediation, in the decontamination of petroleum drill cuttings. Drill cuttings with relatively low concentration of total petroleum hydrocarbons (TPH) and metals were mixed with soil in the ratio 5:1 and treated with three different combinations of the bioremediation options. Option A entailed bioaugmentation supplemented with phytoremediation. Option B had the combination of biostimulation and bioaugmentation supplemented with phytoremediation. While biostimulation supplemented with phytoremediation was deployed in option C. Option O containing the drill cuttings–soil mixture without treatment served as untreated control. Fertilizer application, tillage and watering were used for biostimulation treatment, while spent mushroom substrate (Pleurotus ostreatus) and elephant grass (Pennisetum purpureum) were employed for bioaugmentation and phytor...