3D printing for clothing production
Reads0
Chats0
TLDR
In this paper, a fashion industry has adapted 3D printing technology for fashion applications by laying down successive layers of various materials, which is a well-known technology for creating 3D objects.Abstract:
3D printing is a well-known technology for creating 3D objects by laying down successive layers of various materials. Among the wide range of applications, fashion industry has adapted these techno...read more
Citations
More filters
Journal ArticleDOI
4D Textiles Made by Additive Manufacturing on Pre-Stressed Textiles—An Overview
TL;DR: In this paper, an overview of materials, production technologies and testing methods for additive manufacturing on pre-stressed textiles is given. But, only limited research has been conducted on simulating the material behavior.
Journal ArticleDOI
Review on Development and Application of 3D-Printing Technology in Textile and Fashion Design
Yang Xiao,Chi Wai Kan +1 more
TL;DR: In this paper , the authors provide a timely and comprehensive review of 3D printing for the textile and fashion industries according to recent advances in research, and summarize three routes to use 3D technology in textile manufacturing, including printing fibers, printing flexible structures and printing on textiles.
Journal ArticleDOI
The effect of 3d printing on a textile fabric
TL;DR: In this article, the effect of 3D printing parameters on textile materials was studied by applying successive layers of materials, and the best adhesion and stability parameters for a particular type of fabric were determined by analyzing the type of the fabric.
Journal ArticleDOI
Novel photoinitiators based on difluoroborate complexes of squaraine dyes for radical polymerization of acrylates upon visible light
TL;DR: In this paper , the efficiency of two-component photoinitiators based on a typical squaraine dye and its difluoroborate analogues for the radical polymerization of acrylate monomers is described.
Journal ArticleDOI
3D printing technology for textiles and fashion
Tanvir Mahady Dip,Ayesha Siddika Emu,Nafiul Hassan Nafiz,Puja Kundu,Hasnatur Rahman Rakhi,Abdullah Sayam,Akhtarujjman,Mohammad Shoaib,Shakil Ahmed,Swimi Tabassum Ushno,Abdullah Ibn Asheque,Enamul Hasnat,Mohammad Abbas Uddin,Abu Sadat Muhammad Sayem +13 more
TL;DR: The 3D printing process has been known for a fair amount of time, but only the more recent developments have revealed its recent developments as discussed by the authors, which is one of the modern approaches in the field of manufacturing.
References
More filters
Journal ArticleDOI
Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio
TL;DR: In this article, a numerical topology optimization method is used to design and fabricate compliant micromechanisms and material structures with negative Poisson's ratio (NPR) using a laser micromachining setup.
Journal ArticleDOI
3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials
TL;DR: The Fused Deposition Modelling (FDM) technique as mentioned in this paper uses a plastic filament which is pushed through a heated extrusion nozzle melting the material, and different challenges occur in the production process, and the produced part shows different mechanical properties.
Journal ArticleDOI
Auxetic materials and their potential applications in textiles
Zhengyue Wang,Hong Hu +1 more
TL;DR: Auxetic materials are a kind of non-conventional materials having negative Poisson's ratio as discussed by the authors, which can laterally expand when stretched or laterally shrink when compressed.
Journal ArticleDOI
Direct 3D printing of polymers onto textiles: experimental studies and applications
TL;DR: In this article, a series of shapes and structures were designed as 3D computer-aided design (CAD) solids to determine whether complex parts could be printed directly onto the surface of fabrics.
Journal ArticleDOI
3D Printing of Textiles: Potential Roadmap to Printing with Fibers.
Kony Chatterjee,Tushar K. Ghosh +1 more
TL;DR: The current 3DP technologies are reviewed with emphasis on soft and anisotropic structures, as well as the efforts toward 3DP of textiles, and a potential pathway to 3D of textile, dubbed as printing with fibers to create textile structures is proposed for further exploration.