Journal ArticleDOI
A study on mechanical and tribological properties of silicone rubber reinforced with white carbon black
TLDR
In this paper, the effect of white carbon black (fumed silica and precipitated silica) on the mechanics and friction properties of silicone rubber was analyzed and the tensile strength, tearing strength, and friction property was analyzed.Abstract:
This paper analysed the effect of different white carbon black (fumed silica and precipitated silica) on the mechanics and friction property of silicone rubber. The tensile strength, tearing streng...read more
Citations
More filters
Journal ArticleDOI
Macro- and mesoscopic mechanical properties of complex fabric rubber composite under different temperatures
TL;DR: In this article, the mechanical properties of complex fabric rubber composite under different temperatures are studied based on the macro-and mesoscopic structural characterization, which has important guiding significance for the design of advanced fabric rubber rubber composite.
Journal ArticleDOI
The reuse of red brick powder as a filler in styrene-butadiene rubber
TL;DR: In this article, red brick fragments were broken into powder and filled in styrene-butadiene rubber (SBR) to strengthen its mechanical property, and the rubber filled with modified brick powder showed better mechanical property than the unmodified.
Journal ArticleDOI
Carbon fiber @ silicone rubber core-sheath elastomer for enhancing wear-resisting performance of phenolic resin composites
TL;DR: In this paper, an efficient strategy was developed to prepare the linear cylinder-like carbon fiber @ room temperature vulcanized silicone rubber (Cf@RTVSR) core-sheath elastomer as the high-performance additive of PRC with the purpose of improving the wear-resisting performance of phenolic resin composites.
Journal ArticleDOI
Fabrication of exfoliated graphite reinforced silicone rubber composites - Mechanical, tribological and dielectric properties
P. S. Sarath,Sohil Varghese Samson,Rakesh Reghunath,Mrituanjay Kumar Pandey,Józef Haponiuk,Sabu Thomas,Soney C. George +6 more
TL;DR: The effect of exfoliated graphite (EG) on the mechanical, tribological and dielectric properties of the silicone rubber (QM) composites has been systematically investigated and analysed as discussed by the authors.
References
More filters
Journal ArticleDOI
Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes
TL;DR: In this paper, the effect of Al2O3 or ZnO fillers on the thermal conductivity and coefficient of thermal expansion (CTE) of the silicone rubber was investigated.
Journal ArticleDOI
Peripheral nerve regeneration using silicone rubber chambers filled with collagen, laminin and fibronectin.
Yueh-Sheng Chen,Ching Liang Hsieh,Chin Chuan Tsai,Ter Hsin Chen,Wen Chiang Cheng,Cheng Li Hu,Chun-Hsu Yao +6 more
TL;DR: Results showed that the gel mixture of collagen, laminin and fibronectin could offer a suitable growth medium for the regeneration of axons.
Journal ArticleDOI
High Performance Graphene Oxide Based Rubber Composites
Yingyan Mao,Shipeng Wen,Yulong Chen,Fazhong Zhang,Pierre Panine,Tung W. Chan,Liqun Zhang,Yongri Liang,Li Liu +8 more
TL;DR: The results demonstrated that the mechanical properties of the GO/SBR composite with 2.0 vol.% GO is comparable with those of the SBR composite reinforced with 13.1vol.% of carbon black (CB), with a low mass density and a good gas barrier ability to boot.
Journal ArticleDOI
Single-walled carbon nanotube/silicone rubber composites for compliant electrodes
TL;DR: In this paper, single-walled carbon nanotube (SWCNT)/silicone rubber composites that can be used in fabricating compliant electrodes are prepared by spraying a mixed solution of ionic-liquid-based SWCNT gel and silicone rubber onto an elastic substrate.
Journal ArticleDOI
Effect of expanded graphite and modified graphite flakes on the physical and thermo-mechanical properties of styrene butadiene rubber/polybutadiene rubber (SBR/BR) blends
TL;DR: In this paper, expanded graphite (EG) and isocyanate modified graphite nanoplatelets (i-MG) filled polybutadiene rubber (BR), styrene butadiene (SBR) and SBR/BR blends in the presence of carbon black (CB).