scispace - formally typeset
Open AccessJournal ArticleDOI

Briquettes from maize cobs and Ceiba pentandra at room temperature and low compacting pressure without a binder

TLDR
In this article, the authors reported the findings of densifying ground maize cobs and Ceiba pentandra sawdust at room temperature using low compacting pressure without a binder.
Abstract
This paper reports the findings of densifying ground maize cobs and Ceiba pentandra sawdust at room temperature using low compacting pressure without a binder. The maize cobs were crushed using a hammer mill. Particle sizes of maize cobs and C. pentandra used for the study were ≤1 mm. The two materials were combined at mixing percentages of 90:10, 70:30 and 50:50 (C. pentandra/maize cobs). Briquettes were produced using a laboratory hydraulic press. Compacting pressure was varied from 20 to 50 MPa at an interval of 10 MPa. The results indicated that the relaxed density of briquettes produced from particles of maize cobs only ranged from 541 to 659 kg/m 3 whilst that made from a mixture of maize cobs and C. pentandra ranged from 565 to 774 kg/m 3 . Compressive strength in cleft of briquettes produced from maize cobs only ranged from 0.12 to 0.54 N/mm whilst that produced from a combination of maize cobs and C. pentandra ranged from 7.72 to 59.22 N/mm. Additionally, at all compacting pressure levels, briquettes made from maize cobs only had an impact resistance index of 0%. Whilst those made from a combination of maize cobs and C. pentandra ranged from 115% to 500%. Thus, briquettes with adequate physical and mechanical characteristics could be produced from maize cobs at room temperature using low compacting pressure when maize cobs are combined with sawdust of C. pentandra. These findings could enhance the existing technology for densifying agricultural residues, for example, maize cobs, especially in rural communities.

read more

Citations
More filters
Journal ArticleDOI

Quality parameters relevant for densification of bio-materials: Measuring methods and affecting factors - A review

TL;DR: This paper investigates the state-of-the-art methods and devices used in the quality assessment of densified bio-materials, including a comparison between non-standard and standard methods, and discusses the effect of different factors on the properties of density using an integrated approach.
Journal ArticleDOI

Combustion characteristics of fuel briquettes made from charcoal particles and sawdust agglomerates

TL;DR: The combustion characteristics of fuel briquettes made from Idigbo charcoal particles, pine sawdust and their agglomerates using gelatinized cassava peels were investigated in this article.
Journal ArticleDOI

Physical and combustion properties of agricultural residue bio-char bio-composite briquettes as sustainable domestic energy sources

TL;DR: In this article, the authors developed bio-composite carbonized briquettes from rice husks, coffee husks and groundnut shells, in varying proportions, after carbonization and application of starch binder.
Journal ArticleDOI

Evaluation of Fuel Properties of Six Tropical Hardwood Timber Species for Briquettes

TL;DR: The fuel potential of six tropical hardwood species namely: Triplochiton scleroxylon, Ceiba pentandra, Aningeria robusta, Terminalia superba, Celtis mildbreadii and Piptadenia africana were studied as mentioned in this paper.
Journal ArticleDOI

Characterization of fuel briquettes made from a blend of rice husk and palm oil mill sludge

TL;DR: In this article, the physical and combustion properties of briquettes produced from a blend of palm oil mill sludge (POMS) and rice husk were investigated, and the results showed that increased addition of POMS sludge in rice hulls significantly influenced (p < 0.05) the physical, combustion, and durability properties of the briquette produced.
References
More filters
Journal ArticleDOI

Bio-oil and bio-char production from corn cobs and stover by fast pyrolysis

TL;DR: In this paper, a pilot scale fluidized bed reactor was used to produce bio-oil and bio-char from corn cobs and corn stover (stalks, leaves and husks) by fast pyrolysis.
Report SeriesDOI

Sustainable Production of Second-Generation Biofuels: Potential and Perspectives in Major Economies and Developing Countries

TL;DR: The sustainability of many first-generation bio-fuels has been increasingly questioned over concerns such as reported displacement of food-crops, effects on the environment and climate change.
Journal ArticleDOI

Production of fuel briquettes from olive refuse and paper mill waste

TL;DR: In this article, a steel die was used to produce fuel briquettes with high mechanical strength from paper mill waste and olive refuse, and the results showed that the mechanical strength of the resulting fuel was not high enough.
Journal ArticleDOI

Process conditions affecting the physical quality of alfalfa pellets

TL;DR: In this paper, the physical quality of alfalfa pellets can be optimized by control of the manufacturing process Process conditions were conditioning and pellet temperature, die geometry (length-to-diameter or l/d ratio), hammer mill screen size used in grinding the dehydrated hay chops, and die speed.
Journal ArticleDOI

Densification characteristics of corn cobs

TL;DR: In this article, the effects of particle size (0.85 and 2.81mm), moisture content (10 and 20% w.b.), and preheating temperature (25 and 85°C) on the density and durability of the corn cob briquettes (with diameter of about 19.0mm) were studied.
Related Papers (5)