Diffraction efficiency enhancement and optimization in full-color HOE using the inhibition characteristics of the photopolymer
Reads0
Chats0
TLDR
In this article, a novel and effective simultaneous recording method was proposed for improving the diffraction efficiency and uniformity of full-color holographic optical elements (HOE) using the Bayfol HX102 photopolymer.Abstract:
A novel and effective simultaneous recording method, to the best of our knowledge, is proposed for improving the diffraction efficiency and uniformity of full-color holographic optical elements (HOE) using the Bayfol HX102 photopolymer. To improve the diffraction efficiency of a full-color HOE, it is important to find the optimal recording beam intensity taking into account the initial and late responses of the medium. The range of optimal beam intensity for recording full-color HOE can be found experimentally by analyzing the inhibition period and response characteristics of the recording medium for three wavelengths. Through this method, a full-color HOE with an average diffraction efficiency of about 56.81% and a standard deviation of about 1.7% was implemented in a single layer photopolymer.read more
Citations
More filters
Journal ArticleDOI
Three-dimensional see-through augmented-reality display system using a holographic micromirror array
Nyamsuren Darkhanbaatar,Munkh-Uchral Erdenebat,Chang-Won Shin,Ki-Chul Kwon,Kwon-Yeon Lee,Ganbat Baasantseren,Nam Kim +6 more
TL;DR: This work proposes a novel, to their knowledge, three-dimensional see-through augmented-reality display system using the holographic micromirror array, which reconstructs a three- dimensional image from a displayed elemental image set without using any additional device.
Journal ArticleDOI
Uniformity improvement of a reconstructed-holographic image in a near-eye display system using off-axis HOE.
TL;DR: In this paper , a method for implementing an optimal uniform image by analyzing the diffraction efficiency and the reconstructed image was analyzed using angular selectivity generated while reproducing the source point of the diffused image as an intermediate element by holographic optical element (HOE).
Journal ArticleDOI
Challenges and Advancements for AR Optical See-Through Near-Eye Displays: A Review
TL;DR: This review presents a brief overview of leading AR NED technologies and focuses on the state-of-the-art research works to counter the respective key challenges with each of the leading ARNED technologies.
Proceedings ArticleDOI
Color optimization of a full-color holographic stereogram printing system using a single SLM based on iterative exposure control
Anar Khuderchuluun,Erkhembaatar Dashdavaa,Ki-Chul Kwon,Hoonjong Kang,Kwonmoo Lee,Nam Jae Kim +5 more
TL;DR: In this article , a color optimization of a full-color holographic stereogram printing system using a single SLM based on iterative exposure is proposed, where an array of sub-holograms (hogels) is generated effectively within fast computergenerated integral imaging, and fully analyzed phase-modulation for red, green, and blue (RGB) channels of hogel.
Journal ArticleDOI
Time-scheduled exposure method for full-color high diffraction efficiency and uniformity of a photopolymer
TL;DR: In this paper , a full-color reflection holographic optical element (HOE) with uniform diffraction efficiency, achieved via time-scheduled exposure, is proposed in which 660, 532, and 473 nm wavelengths are used for recording.
References
More filters
Journal ArticleDOI
Coupled wave theory for thick hologram gratings
TL;DR: In this paper, a coupled wave analysis of the Bragg diffraction of light by thick hologram gratings is given, analogous to Phariseau's treatment of acoustic gratings and to the dynamical theory of X-ray diffraction.
Journal ArticleDOI
Matching Real Fabrics with Micro-Appearance Models
TL;DR: A new appearance matching framework is introduced to determine their parameters and it is found that using a fiber-specific scattering model is crucial to good results as it achieves considerably higher accuracy than prior work.
Journal ArticleDOI
Holographic near-eye displays for virtual and augmented reality
TL;DR: A unified focus, aberration correction, and vision correction model, along with a user calibration process, accounts for any optical defects between the light source and retina to enable truly compact, eyeglasses-like displays with wide fields of view that would be inaccessible through conventional means.
Journal ArticleDOI
A full-color eyewear display using planar waveguides with reflection volume holograms
Hiroshi Mukawa,Katsuyuki Akutsu,Ikuo Matsumura,Satoshi Nakano,Takuji Yoshida,Mieko Kuwahara,Kazuma Aiki +6 more
TL;DR: In this paper, a full-color eyewear display with over 85% see-through transmittance with a 16° horizontal field of view was developed, where two in-and out-coupling reflection volume hologram elements enabled a simple configuration that has an optical engine beside the user's temples.
Journal ArticleDOI
Position-based tensegrity design
TL;DR: An algorithm is introduced to automatically create free-form stable tensegrity designs that satisfy both fabrication and geometric constraints, and faithfully approximate input geometric shapes, and validate the method with simulations and real-world constructions.