Journal ArticleDOI
Effect of heat treatment on filiform corrosion of aluminium alloy AA3005
TLDR
In this paper, the effect of heat treatment on the filiform corrosion susceptibility of rolled aluminium alloy AA3005 at temperatures in the range 150-500°C was investigated and it was shown that a drastic loss of corrosion resistance takes place as a result of annealing at temperatures exceeding 350°C.About:
This article is published in Corrosion Science.The article was published on 2001-11-01. It has received 69 citations till now. The article focuses on the topics: Aluminium alloy & Intermetallic.read more
Citations
More filters
Journal ArticleDOI
Stable pit formation on AA2024-T3 in a NaCl environment
A. Boag,Russell James Taylor,Tim H. Muster,Nigel Goodman,Dougal G. McCulloch,Chris Ryan,Bibhudutta Rout,David N. Jamieson,Anthony E. Hughes +8 more
TL;DR: In this paper, particle induced X-ray emission spectroscopy (PIXE) and standard electrochemical measurements were used to study the establishment of stable pits on AA2024-T3 in neutral sodium chloride solution (0.1 M NaCl).
Journal ArticleDOI
On the first breakdown in AA7075-T6
Zhijun Zhao,Gerald S. Frankel +1 more
TL;DR: In this article, the first breakdown in AA7075-T6 was studied by an in situ observation system in which a combination of a magnified image of the surface and the instantaneous polarization curve allowed determination of the corrosion process as a function of potential.
Journal ArticleDOI
Effect of thermo-mechanical processing on filiform corrosion of aluminium alloy AA3005.
TL;DR: In this paper, the effect of laboratory scale thermo-mechanical processing of aluminium alloy AA3005, supplied as 2.9 mm sheet at the hot roll transfer gauge, on filiform corrosion susceptibility, electrochemical properties and near surface microstructure was investigated.
Journal ArticleDOI
Influence of heat treatment and surface conditioning on filiform corrosion of aluminium alloys AA3005 and AA5754
TL;DR: In this article, the effect of high-temperature heat treatment combined with different cleaning and pre-treatment practices on filiform corrosion resistance has been investigated for aluminium alloys AA3005 and AA5754.
Book ChapterDOI
High strength Al-alloys: Microstructure, corrosion and principles of protection
Anthony E. Hughes,Nick Birbilis,Johannes M. C. Mol,Santiago J. Garcia,Xiaorong Zhou,George Thompson +5 more
TL;DR: In this paper, Hughes et al. proposed a method to solve the problem of high computational complexity in the context of materials science and engineering, and showed that it is possible to solve it by using a simulation model.
References
More filters
Book
Atlas of Electrochemical Equilibria in Aqueous Solutions
TL;DR: The Atlas of Electrochemical Equilibria in Aqueous solutions as discussed by the authors is the most complete and complete work on aqueous solvents, which includes a detailed description of the properties of the solvers.
Journal ArticleDOI
Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain size
TL;DR: In this paper, an Al-3% Mg solid solution alloy was subjected to intense plastic deformation, using either equal-channel angular (ECA) pressing or torsion straining, to produce grain sizes in the submicrometer range.
Journal ArticleDOI
A Compilation of Corrosion Potentials Reported for Intermetallic Phases in Aluminum Alloys
TL;DR: In this article, a compilation of corrosion potentials reported for Al-based intermetallic compounds is presented, which is intended to serve as an aid in establishing galvanic relationships among discrete microstructural elements in aluminum alloys.
Journal ArticleDOI
Wear processes in sliding systems
TL;DR: In this paper, a sequence of events involved in sliding wear is outlined, where the plastic deformation changes the near-surface microstructure in ways which make the material unstable to local shear.
Journal ArticleDOI
The application of ultramicrotomy to the electronoptical examination of surface films on aluminium
TL;DR: In this article, the application of ultramicrotomy enables observation of the thickness and morphology of both very thin and friable surface films on aluminium, and it is useful in the study of certain phenomena concerning thicker porous-type anodic films.