Journal ArticleDOI
Effect of nanoclay on mechanical, thermal and morphological properties of silicone rubber and EPDM/silicone rubber hybrid composites
TLDR
The effect of nanoclay on tensile properties was studied by dispersing the different weight percentages of montmorillonite (MMT) clay in the silicone rubber and hybri....Abstract:
The effect of nanoclay on tensile properties is studied by dispersing the different weight percentages (0 wt%, 2 wt%, 4 wt% and 6 wt%) of montmorillonite (MMT) clay in the silicone rubber and hybri...read more
Citations
More filters
Journal ArticleDOI
Review of the Performance of High-Voltage Composite Insulators
M. Saleem,Mohammad Shawkat Akbar +1 more
TL;DR: In this article , the authors focused on the effect of fillers on the improvement of the thermal conductivity, dielectric strength, mechanical strength, corona discharge resistance, and tracking and erosion resistance performance of polymeric materials for use as highvoltage transmission line insulators.
Journal ArticleDOI
Review of advanced techniques for manufacturing biocomposites: non-destructive evaluation and artificial intelligence-assisted modeling
Effect of polyethylene terephthalate char on impact and erosion properties of polyester matrix composites
TL;DR: In this paper , a filler is prepared from the waste polyethylene terephthalate (PET) bottle, which is modified into char form by undergoing pyrolysis process.
Journal ArticleDOI
Split-Hopkinson Pressure Bar Test of Silicone Rubber: Considering Effects of Strain Rate and Temperature
TL;DR: In this article , a split-Hopkinson pressure bar test instrument with a temperature control device was used to test silicone rubber at different temperatures (−40 °C −200 °C) and different strain rates.
References
More filters
Journal ArticleDOI
Influence of maleic anhydride grafted ethylene propylene diene monomer (MAH-g-EPDM) on the properties of EPDM nanocomposites reinforced by halloysite nanotubes
TL;DR: In this article, the effect of a maleic ahydride (MAH-g-EPDM) compatibilizer on the tensile and morphological properties of EPDM nanocomposites was investigated.
Journal ArticleDOI
Fabrication and physical properties of EPDM–organoclay nanocomposites
TL;DR: In this article, the properties of EPDM-clay nanocomposites were improved with the addition of organoclay and the change of intercalation behavior during the vulcanization process was discussed.
Journal ArticleDOI
Electrical Insulation Characteristics of Silicone and EPDM Polymeric Blends. I
TL;DR: In this paper, a two-roll mixing mill was used for the preparation of EPDM and silicone rubber in a two roll mixing mill, where Dicumyl peroxide was used as vulcanizing agent.
Journal ArticleDOI
Correlation between viscoelastic behavior and morphology of nanocomposites based on SR/EPDM blends compatibilized by maleic anhydride
TL;DR: In this article, the effect of adding the nanoclay and MAH-g-EPDM on the oscillatory shear rheological properties, dynamic mechanical performance, relaxation behavior and morphology of the nanocomposites were studied.
Journal ArticleDOI
Experimental and analytical investigation of thermo-mechanical responses of pure epoxy and carbon/Kevlar/S-glass/E-glass/epoxy interply hybrid laminated composites for aerospace applications
TL;DR: Most of the aircraft and ship structural components are exposed to different environmental conditions (different temperatures) in various places as mentioned in this paper, and helicopter main and tail rotor blades are also exposed to varying environmental conditions.