Journal ArticleDOI
Effect of sintering parameters on densification, corrosion and wear behaviour of Ni-50Fe alloy prepared by spark plasma sintering
TLDR
In this paper, the effect of various sintering parameters on the densification, electrochemical properties in 1-M H2SO4 solution, coefficient of friction (CoF) and dry sliding wear resistance was investigated.About:
This article is published in Journal of Alloys and Compounds.The article was published on 2017-03-30. It has received 37 citations till now. The article focuses on the topics: Spark plasma sintering & Sintering.read more
Citations
More filters
Journal ArticleDOI
Effects of temperature on microstructure and mechanical properties of IN718 reinforced by reduced graphene oxide through spark plasma sintering
TL;DR: In this paper, the effect of sintering temperature of 850, 900, and 950°C with the heating rate of 100°C/min via Spark Plasmin Sintering (SPS) on Inconel 718 (IN718) superalloy reinforced with 0.25 % reduced oxide graphene (RGO) was investigated by scanning electron microscopy (SEM) and hydraulic testing machine, respectively.
Journal ArticleDOI
Processing metal powders via field assisted sintering technology (FAST): a critical review
TL;DR: In this paper, the current status of field assisted sintering technology (FAST) of structural metals from powder is critically reviewed, and there have been significant increases in the uptake of FA...
Journal ArticleDOI
Spark plasma sintering of nickel and nickel based alloys: A Review
TL;DR: In this article, the use of spark plasma sintering technique has been identified as a means of enhancing materials properties, especially nickel-based alloys, especially for processing nickel alloys.
Journal ArticleDOI
Densification, microstructure and mechanical properties of spark plasma sintered Ni-17%Cr binary alloys
Bukola Joseph Babalola,Mxolisi Brendon Shongwe,Babatunde Abiodun Obadele,Peter Apata Olubambi +3 more
TL;DR: In this article, the effect of sintering temperature on Ni-17%Cr alloys using nickel and chromium as the raw elemental materials was investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD), Vickers microhardness tester and Archimedes method.
Journal ArticleDOI
Synthesis, microstructural and phase evolution in Ti–2Ni and Ti–10Ni binary alloys consolidated by spark plasma sintering technique
Azeez Lawan Rominiyi,Mxolisi Brendon Shongwe,Nthabiseng Maledi,Bukola Joseph Babalola,Peter Apata Olubambi +4 more
TL;DR: In this paper, the authors synthesized and consolidated Ti-2Ni and Ti-10Ni binary alloys using spark plasma sintering technique, at a TF2 Turbula mixer, at the speed of 101-rpm for 8-h.
References
More filters
Journal ArticleDOI
Field-Assisted Sintering Technology/Spark Plasma Sintering: Mechanisms, Materials, and Technology Developments
Olivier Guillon,Jesus Gonzalez-Julian,Benjamin Dargatz,Tobias Kessel,Gabi Schierning,Jan Räthel,Mathias Herrmann +6 more
TL;DR: Field-assisted sintering is a low voltage, direct current (DC) pulsed current activated, pressure-assisted, and synthesis technique, which has been widely applied for materials processing in the recent years as mentioned in this paper.
Journal ArticleDOI
Spark plasma sintering of metals and metal matrix nanocomposites: a review
Nouari Saheb,Zafar Iqbal,Abdullah Khalil,Abbas Saeed Hakeem,Nasser Al Aqeeli,Tahar Laoui,Amro M. Al-Qutub,René Kirchner +7 more
TL;DR: In this paper, the authors present the spark plasma sintering process and review published work on spark-plasma-sintered metals and metal matrix nanocomposites.
Journal ArticleDOI
Densification mechanisms in spark plasma sintering: Effect of particle size and pressure
S. Diouf,A. Molinari +1 more
TL;DR: In this paper, the effect of particle size, pressure and temperature at which pressure is applied on the SPS mechanism of particle rearrangement, localized deformation, bulk deformation and neck growth was investigated.
Journal ArticleDOI
Dry sliding friction and wear properties of zinc-based alloys
TL;DR: In this article, the friction and wear of two near-eutectoid and two monotectoid permanent-moulded zinc-based alloys and an SAE 660 bronze for comparison were investigated under dry sliding conditions.
Journal ArticleDOI
Corrosion behaviour of 304 stainless steel in sulphuric acid solutions and its inhibition by some substituted pyrazolones
TL;DR: In this paper, the corrosion behavior of 304 stainless steel (SS) in 05m H2SO4 solution was studied using potentiodynamic and galvanostatic polarization techniques Three anodic peaks were observed in the potentiodynamics anodic polarization curves before oxygen evolution.
Related Papers (5)
Influence of spark plasma sintering (SPS) processing parameters on microstructure and mechanical properties of nickel
Tushar Borkar,Rajarshi Banerjee +1 more