Institution
URS Corporation
About: URS Corporation is a based out in . It is known for research contribution in the topics: Earthquake engineering & Hypocenter. The organization has 589 authors who have published 738 publications receiving 26906 citations. The organization is also known as: United Research Services.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: The concept of high entropy introduces a new path of developing advanced materials with unique properties, which cannot be achieved by the conventional micro-alloying approach based on only one dominant element as mentioned in this paper.
4,394 citations
••
TL;DR: The 26 December 2004 Sumatra-Andaman earthquake initiated slowly, with small slip and a slow rupture speed for the first 40 to 60 seconds, then the rupture expanded at a speed of about 2.5 kilometers per second toward the north northwest, extending 1200 to 1300 kilometers along the Andaman trough as discussed by the authors.
Abstract: The 26 December 2004 Sumatra-Andaman earthquake initiated slowly, with small slip and a slow rupture speed for the first 40 to 60 seconds. Then the rupture expanded at a speed of about 2.5 kilometers per second toward the north northwest, extending 1200 to 1300 kilometers along the Andaman trough. Peak displacements reached ∼15 meters along a 600-kilometer segment of the plate boundary offshore of northwestern Sumatra and the southern Nicobar islands. Slip was less in the northern 400 to 500 kilometers of the aftershock zone, and at least some slip in that region may have occurred on a time scale beyond the seismic band.
660 citations
••
TL;DR: In this paper, a spectral acceleration attenuation model for Japan is presented, which includes a very large number of strong ground-motion records up to the 2003 Off Tokach main and aftershocks.
Abstract: A spectral acceleration attenuation model for Japan is presented in the present study. The data set includes a very large number of strong ground-motion records up to the 2003 Off Tokach main and aftershocks. Site class terms, instead of individual site correction terms, are used. The site classes of recording stations are from a recent study on site classification for strong-motion recording stations in Japan according to a classification scheme that has been used in Japanese engineering design. The use of site class terms enables tectonic source-type effects to be identified and accounted for in the present model. The effects of a faulting mechanism for crustal earthquakes also are accounted for. For crustal and interface earthquakes, a simple form of an attenuation model (with respect to distance) is able to capture the main strong-motion characteristics and achieves unbiased estimates. For subduction slab events, a simple distance modification factor is employed to achieve plausible and unbiased predictions. The effects of source depth, tectonic source type, and faulting mechanism of crustal earthquakes are significant. The need for magnitude- squared terms is evaluated, and the use of magnitude-squared terms reduces the interevent error further.
650 citations
••
TL;DR: The measurements indicate that well completion emissions are lower than previously estimated; the data also show emissions from pneumatic controllers and equipment leaks are higher than Environmental Protection Agency (EPA) national emission projections.
Abstract: Engineering estimates of methane emissions from natural gas production have led to varied projections of national emissions. This work reports direct measurements of methane emissions at 190 onshore natural gas sites in the United States (150 production sites, 27 well completion flowbacks, 9 well unloadings, and 4 workovers). For well completion flowbacks, which clear fractured wells of liquid to allow gas production, methane emissions ranged from 0.01 Mg to 17 Mg (mean = 1.7 Mg; 95% confidence bounds of 0.67–3.3 Mg), compared with an average of 81 Mg per event in the 2011 EPA national emission inventory from April 2013. Emission factors for pneumatic pumps and controllers as well as equipment leaks were both comparable to and higher than estimates in the national inventory. Overall, if emission factors from this work for completion flowbacks, equipment leaks, and pneumatic pumps and controllers are assumed to be representative of national populations and are used to estimate national emissions, total annual emissions from these source categories are calculated to be 957 Gg of methane (with sampling and measurement uncertainties estimated at ±200 Gg). The estimate for comparable source categories in the EPA national inventory is ∼1,200 Gg. Additional measurements of unloadings and workovers are needed to produce national emission estimates for these source categories. The 957 Gg in emissions for completion flowbacks, pneumatics, and equipment leaks, coupled with EPA national inventory estimates for other categories, leads to an estimated 2,300 Gg of methane emissions from natural gas production (0.42% of gross gas production).
544 citations
••
TL;DR: It is shown that, even when the material undergoes elemental segregation, precipitation, chemical ordering and spinodal decomposition, a significant amount of disorder remains, due to the distributions of multiple elements in the major phases.
Abstract: The alloy-design strategy of combining multiple elements in near-equimolar ratios has shown great potential for producing exceptional engineering materials, often known as 'high-entropy alloys'. Understanding the elemental distribution, and, thus, the evolution of the configurational entropy during solidification, is undertaken in the present study using the Al₁.₃CoCrCuFeNi model alloy. Here we show that, even when the material undergoes elemental segregation, precipitation, chemical ordering and spinodal decomposition, a significant amount of disorder remains, due to the distributions of multiple elements in the major phases. The results suggest that the high-entropy alloy-design strategy may be applied to a wide range of complex materials, and should not be limited to the goal of creating single-phase solid solutions.
519 citations
Authors
Showing all 589 results
Name | H-index | Papers | Citations |
---|---|---|---|
Kara M. Kockelman | 60 | 342 | 19735 |
Sergio Fagherazzi | 51 | 169 | 8398 |
Youssef M. A. Hashash | 43 | 241 | 6812 |
Richard Sause | 42 | 226 | 6783 |
Robert W. Graves | 42 | 124 | 8595 |
Anil K. Agrawal | 38 | 155 | 4164 |
Michael C. Gao | 37 | 91 | 7667 |
Amir Mirmiran | 37 | 182 | 5914 |
David E. Daniel | 37 | 109 | 5724 |
Paul Somerville | 36 | 121 | 7074 |
David A. Feary | 34 | 82 | 4445 |
Congjun Wang | 33 | 79 | 5117 |
Cumaraswamy Vipulanandan | 32 | 320 | 3754 |
Saleem H. Ali | 30 | 166 | 5231 |
Jack A. Puleo | 29 | 111 | 2713 |