Journal ArticleDOI
Electroless nickel-phosphorus coating on Ti and Al elemental powders
About:
This article is published in Scripta Materialia.The article was published on 2001-07-31. It has received 32 citations till now. The article focuses on the topics: Electroless nickel & Metal powder.read more
Citations
More filters
Journal ArticleDOI
Evaluation of microstructure and contiguity of W/Cu composites prepared by coated tungsten powders
TL;DR: In this paper, the effect of pre-coating of tungsten particles on microstructure, contiguity and density of infiltrated W/Cu compacts was evaluated by OM/SEM, EDS and Archimedes methods.
Journal ArticleDOI
Combustion of activated aluminum
TL;DR: In this article, four different methods were used to study the preignition process of activated aluminum, including microscopic imaging, digital imaging, and TGA and DSC, at pressures up to 64 bar in air, nitrogen, and carbon dioxide.
Journal ArticleDOI
Improvement of physical properties of Cu-infiltrated W compacts via electroless nickel plating of primary tungsten powder
TL;DR: In this paper, tungsten particles were coated using nickel/nickel-phosphorus electroless plating technique to achieve compact material of cylindrical shape with same porosity.
Journal ArticleDOI
Preparation of nickel-coated tungsten carbide powders by room temperature ultrasonic-assisted electroless plating
TL;DR: In this paper, Ni-coated tungsten carbide composite powders have been synthesized by ultrasonic-assisted electroless plating with a simplified pretreatment at room temperature as the conventional sensitization and activation steps have not been employed.
Journal ArticleDOI
Electrochemically promoted electroless nickel-phosphorous plating on titanium substrate
TL;DR: In this article, an electrochemically promoted electroless nickel-phosphorous plating process on titanium substrate is proposed, and the influences of the temperature and current density on the phosphorous content, coating thickness and corrosion resistance are investigated.
References
More filters
Journal ArticleDOI
Effect of Ti/Al ratio and Cr, Nb, and Hf additions on material factors and mechanical properties in TiAl
TL;DR: In this article, the effect of lattice parameters and axial ratio on mechanical properties of two-phase TiAl-base alloys has been studied, and it has been shown that the lattice parameter can affect the ductility of the alloys.
Journal ArticleDOI
TiAl-based alloys with nickel
Josef Bauer,Josef Bauer,Peter Rogl,André Perrin,Marcel Bohn,Walter Wolf,Raimund Podloucky,Yannick LeFriec,Yannick LeFriec,David Antoine,David Antoine +10 more
TL;DR: In this article, the authors investigated the alloying potential of nickel as a minor constituent in TiAl-based intermetallics with respect to its constitutional ability to provide the necessary microstructures for higher ductility and low fracture toughness.
Journal ArticleDOI
High-performance Ni3Al synthesized from composite powders
Wen-Chih Chiou,Chen-Ti Hu +1 more
TL;DR: In this paper, a tensile elongation of about 16 Pct at room temperature was achieved for Ni3Al composite powder metallurgy (CPM) specimens, and comparison with previous reports was conducted.
Journal ArticleDOI
Magnetic moment studies on nickel coated titanium powders
TL;DR: In this article, the magnetic moment test was conducted on the coated particles to confirm the increase in coating thickness with time, and the presence of nickel was confirmed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) studies.