Journal ArticleDOI
Experimental investigation of angled injection in a compressible flow
Roy Hartfield,Douglas Bayley +1 more
About:
This article is published in Journal of Propulsion and Power.The article was published on 1996-03-01. It has received 17 citations till now. The article focuses on the topics: Boundary layer thickness & Compressible flow.read more
Citations
More filters
Journal ArticleDOI
Ignition, flame structure and near-wall burning in transverse hydrogen jets in supersonic crossflow
Mirko Gamba,M. Godfrey Mungal +1 more
TL;DR: In this article, the authors investigated the properties of transverse sonic hydrogen jets in high-temperature supersonic crossflow at jet-to-crossflow momentum flux ratios between 0.3 and 5.0.
Journal ArticleDOI
Numerical Investigation of Supersonic Injection Using a Reynolds-Stress Turbulence Model
TL;DR: Zhang et al. as mentioned in this paper used Reynolds-stress turbulence and K-≤ models to numerically simulate a 25-deg, Mach 1.8 injection into a Mach 3.0 crosse flow.
Journal Article
Ignition, Flame Structure and Near-Wall Burning in Transverse Hydrogen Jets in Supersonic Crossflow
TL;DR: Schlieren et al. as mentioned in this paper investigated the properties of transverse sonic hydrogen jets in high-temperature supersonic crossflow at jet-to-crossflow momentum flux ratios between 0.3 and 5.0.
Journal ArticleDOI
Investigation of transpiration cooling for sintered metal porous struts in supersonic flow
TL;DR: In this article, the transpiration cooling of a sintered porous strut was investigated to protect the strut from ablation, and the results showed that the surface average cooling effectiveness increasing extent decreases with the increasing coolant blowing ratio.
Journal ArticleDOI
Numerical study on supersonic mixing and combustion with hydrogen injection upstream of a cavity flameholder
TL;DR: In this article, the authors investigated the characteristics of supersonic mixing and combustion with hydrogen injection upstream of a cavity flameholder using hybrid RANS/LES (Reynolds-Averaged Navier-Stokes/Large-Eddy Simulation) method.
References
More filters
Journal ArticleDOI
Vortical and turbulent structure of a lobed mixer free shear layer
D. C. McCormick,John C. Bennett +1 more
TL;DR: In this article, an experimental investigation of the vortical and turbulent structure in a free shear lager downstream of a lobed mixer has been conducted, and a new vortex structure was confirmed to exist for the lobed mixers in addition to the well-known streamwise vortex array, consistent with the work of Manning.
Journal ArticleDOI
Experimental investigation of a supersonic swept ramp injector using laser-induced iodine fluorescence
TL;DR: In this article, measurements of injectant mole fraction and temperature have been conducted in a nonreacting supersonic combustor configured with underexpanded injection in the base of a swept ramp.
Journal ArticleDOI
Experimental Measurement of the Vortex Development Downstream of a Lobed Forced Mixer
TL;DR: In this article, an experimental study was conducted to investigate the mixing processes downstream of a forced mixer and the results indicated that both the mean secondary motion and the turbulent mixing occurring after vortex breakdown need to be considered for prediction of forced mixer performance.
Book ChapterDOI
Mixing of Transverse Jets and Wall Jets in Supersonic Flow
TL;DR: A critical review of the available high speed mixing experimental database is presented in this paper, where several classes of injection are considered including transverse jets, wall slots, and some hybrid cases.