scispace - formally typeset
Open AccessJournal ArticleDOI

High-speed optical switching of InAlGaAs/InAlAs multi-mode interference photonic switch with partial index-modulation region (MIPS-P)

Reads0
Chats0
TLDR
A semiconductor multi-mode interference photonic switch with partial index-modulation regions (MIPS-P) was fabricated and high-speed switching operation was demonstrated, for the first time, at a repetition rate of 10 MHz.
Abstract
Advanced photonic networks require high-speed switching in nano-second order switching time, low power consumption and low crosstalk, etc. For these purposes we proposed a semiconductor multi-mode interference photonic switch with partial index-modulation regions (MIPS-P) which can operate by current injection for refractive index change and is expected as a high-speed optical switch. In this letter we have experimentally confirmed small-current and low-crosstalk operation by using InAlGaAs/InAlAs, which is effective for injected carrier confinement. And also high-speed switching operation in a switching time of about 1.5ns has been demonstrated, for the first time, at a repetition rate of 10MHz.

read more

Citations
More filters
Journal ArticleDOI

Very Low Power Operation of Compact MMI Polymer Thermooptic Switch

TL;DR: In this paper, the authors demonstrate a compact, very low power consumption, and low crosstalk multimode interference coupler-based polymer thermooptic photonic switch.
Journal ArticleDOI

Multimode interference photonic switches

TL;DR: In this paper, the structure and operation principle of various types of multimode interference switches are introduced, and the recent progresses of MMI switches are also discussed, as well as the recent progress of the MMI switch.
Journal Article

Multimode interference photonic switches

TL;DR: In this article, the structure and operation principle of various types of multimode interference switches are introduced, and the recent progresses of MMI switches are also discussed, as well as the recent progress of the MMI switch.
Journal ArticleDOI

Design and Performance of Low-Power, High-Speed, Polarization-Independent and Wideband Polymer Buried-Channel Waveguide Thermo-Optic Switches

TL;DR: In this paper, the authors compared the characteristics of two kinds of polymer buried-channel waveguide thermo-optic switches such as a multimode interference (MMI) switch using a single MMI coupler and a Mach-Zehnder interferometer (MZI) switch.
Journal ArticleDOI

Compact InGaAsP/InP 3 × 3 multimode-interference coupler-based electro-optic switch

TL;DR: A compact 3×3 MMI coupler electro-optic switch based on the carrier injection effect on InGaAsP/InP substrates is demonstrated and one of the switching states is experimentally validated on a fabricated device with maximum current injections of ∼25 mA under combined bias voltages.
References
More filters
Journal ArticleDOI

Optical multi-mode interference devices based on self-imaging: principles and applications

TL;DR: The underlying self-imaging principle in multimode waveguides is described using a guided mode propagation analysis and it is shown that multimode interference couplers offer superior performance, excellent tolerance to polarization and wavelength variations, and relaxed fabrication requirements when compared to alternatives such as directional coupling.
Journal ArticleDOI

Multimode interference photonic switches (MIPS)

TL;DR: In this paper, the authors analyzed the switching characteristics of multimode interference photonic switches (MIPS) by wide-angle finite difference beam propagation method (FD-BPM) and found that MIPS with a length of 599 /spl mu/m can switch the output light polarization insensitively with a crosstalk of less than -20 dB for a wavelength range of 70 nm.
Journal ArticleDOI

Versatile multimode interference photonic switches with partial index-modulation regions

TL;DR: In this paper, a new structure is proposed for multimode interference photonic switches which have partial index-modulation regions to obtain control of the power switching between multiple output ports, and the switching characteristics for a 3 × 3 configuration are analyzed by the wide-angle finite-difference beam propagation method.
Journal ArticleDOI

InGaAsP/InP Multi-Mode Interference Photonic Switches for Monolithic Photonic Integrated Circuits

TL;DR: In this paper, a 1×2 InGaAsP/InP MIPS's with a high-mesa structure have been fabricated, and fundamental switching characteristics were measured, at the preliminary stage, switching was observed at 20 mA current injection with about 37% extinction ratio.
Related Papers (5)