scispace - formally typeset
Journal ArticleDOI

Improvement in concrete behavior with fly ash, silica-fume and coconut fibres

TLDR
In this article, the mechanical properties of fly ash silica-fume plain concrete (FA-SPC) and fly ash-silicafume coconut fibre reinforced concrete (SCFRC) are investigated.
About
This article is published in Construction and Building Materials.The article was published on 2019-04-10. It has received 164 citations till now. The article focuses on the topics: Fly ash & Cement.

read more

Citations
More filters
Journal ArticleDOI

Efficiency of silica-fume content in plain and natural fiber reinforced concrete for concrete road

TL;DR: In this article, the authors compared the properties of S-PC and S-CFRC with different silica-fume contents, i.e., 5, 10, 15% and 20% by cement mass.
Journal ArticleDOI

Effect of Coconut Fiber Length and Content on Properties of High Strength Concrete.

TL;DR: The experimental results revealed that CFR-HSC has improved compressive, splitting-tensile, and flexural strengths, and energy absorption and toughness indices compared to HSC.
Journal ArticleDOI

A step towards durable, ductile and sustainable concrete: Simultaneous incorporation of recycled aggregates, glass fiber and fly ash

TL;DR: In this paper, a method is proposed to enhance the mechanical and durability performance of RAC by combined incorporation of glass fiber (GF) and fly ash (FA), which can help in manufacturing more durable, ductile and sustainable RAC.
Journal ArticleDOI

Reviewing the behaviour of high volume fly ash based self compacting concrete

TL;DR: In this article, the performance of High Volume Fly Ash (HVFA) based Self Compacting Concrete (SCC) prepared with Natural Coarse Aggregates (NCA) and Recycled Concrete Aggregate (RCA) has been investigated in terms of fresh, mechanical and durability properties.
Journal ArticleDOI

Concrete Containing Waste Glass as an Environmentally Friendly Aggregate: A Review on Fresh and Mechanical Characteristics

TL;DR: In this article , the authors reviewed the literature discussing the use of recycled glass waste in concrete as a partial or complete replacement for aggregates, focusing on the effect of recycling glass waste on the fresh and mechanical properties of concrete.
References
More filters
Book

Properties of concrete

TL;DR: In this article, the authors present the following properties of concrete: Elasticity, Shrinkage and Creep, Durabilty of Concrete, Freezing and Thawing, and Chlorides.
Journal ArticleDOI

Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers

TL;DR: In this article, the effect of the addition of steel and polypropylene fibers on the mechanical and some durability properties of high-strength concrete (HSC) was investigated, and the results showed that the incorporation of 1% steel fiber significantly enhanced the splitting tensile strength and flexural strength of concrete.
Journal ArticleDOI

A study on high strength concrete prepared with large volumes of low calcium fly ash

TL;DR: In this article, the authors presented the results of a laboratory study on high strength concrete prepared with large volumes of low calcium fly ash, and the results demonstrated the dual effects of fly ash in concrete: (i) act as a microaggregate and (ii) being a pozzolana.
Journal ArticleDOI

The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete

TL;DR: In this paper, the effect of silica fume (SF) and class C fly ash (FA) on the thermal conductivity of lightweight aggregate concrete (LWAC) was measured.
Journal ArticleDOI

Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete

TL;DR: In this paper, the normal consistency, setting time, workability and compressive strength results of Portland cement-fly ash-silica fume systems were reported, and the results showed that water requirement for normal consistency was found to increase with increasing SF content while a decrease in initial setting time was found.
Related Papers (5)