Journal ArticleDOI
Microstructural, tribological and compression behaviour of Copper matrix reinforced with Graphite-SiC hybrid composites
Anbesh Jamwal,Prem Prakash Seth,Devendra Kumar,Rajeev Agrawal,Kishor Kumar Sadasivuni,Pallav Gupta +5 more
TLDR
In this article, a study on preparation of copper-Graphite-Silicon-Carbide hybrid metal matrix composite by stir casting technique is presented. And it is spontaneously expected that present composite will be highly beneficial in structural and mechanical applications.About:
This article is published in Materials Chemistry and Physics.The article was published on 2020-09-01. It has received 56 citations till now. The article focuses on the topics: Metal matrix composite & Vickers hardness test.read more
Citations
More filters
Journal ArticleDOI
Wear, optimization and surface analysis of Al-Al2O3-TiO2 hybrid metal matrix composites:
TL;DR: In this paper, the authors investigate vickers hardness, wear behavior as well as perform optimization of wear data for pure Al and Al-Al2O3-TiO2 hybrid metal matrix composites.
Journal ArticleDOI
Structure and mechanical behavior of in situ developed Mg2Si phase in magnesium and aluminum alloys – a review
TL;DR: In this article, a brief review of Mg2Si binary alloys and Mg-Si alloys is presented, and the morphology and size of an in situ developed Mg 2Si phase depend on the synthesis route and base metal or matrix.
Journal ArticleDOI
Investigation on microstructure, mechanical, and tribological performance of Cu base hybrid composite materials
Journal ArticleDOI
Fabrication and mechanical properties of α-Al2O3 whisker reinforced cu-graphite matrix composites
Tan Wenyue,Tan Wenyue,Xiaosong Jiang,Xiaosong Jiang,Zhenyi Shao,Zhenyi Shao,Hongliang Sun,Hongliang Sun,Tingfeng Song,Zhiping Luo +9 more
TL;DR: In this article, the α-Al2O3 whisker reinforced Cu-graphite matrix composites were prepared by spark plasma sintering, and the results showed that surface modification with sodium dodecyl sulfate solution can improve its dispersibility and the composites obtained are basically completely dense.
Journal ArticleDOI
Investigation of microstructure and mechanical properties of Cu/Ti–B–SiCp hybrid composites
TL;DR: In this article, a powder metallurgy method was used to produce hybrid composite materials using three different sintering temperatures (950, 1000, 1050 −°C), and their microstructure and mechanical properties were investigated, it was determined that reinforcement elements have a homogeneous interface in the main matrix.
References
More filters
Journal ArticleDOI
The production and application of metal matrix composite materials
TL;DR: The most widely applied methods for the production of composite materials and composite parts are based on casting techniques such as the squeeze casting of porous ceramic preforms with liquid metal alloys and powder metallurgy methods.
Journal ArticleDOI
Advance research progresses in aluminium matrix composites: manufacturing & applications
P. Garg,Anbesh Jamwal,Devendra Kumar,Kishor Kumar Sadasivuni,Chaudhery Mustansar Hussain,Pallav Gupta +5 more
TL;DR: In this article, an overview on synthesis routes, mechanical behavior and applications of aluminium matrix composites is presented, where a special focus is given to primary processing techniques for manufacturing of aluminium matrices.
Journal ArticleDOI
Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications
Th. Schubert,Łukasz Ciupiński,W. Zielinski,Andrzej Michalski,Thomas Weißgärber,Bernd Kieback +5 more
TL;DR: In this article, the authors used atomized copper alloy with minor additions of chromium to increase the interfacial bonding in Cu/diamond composites by a thin nano-sized Cr 3 C 2 layer.
Journal ArticleDOI
Enhancement of the mechanical properties of graphene–copper composites with graphene–nickel hybrids
TL;DR: In this article, the authors reported the mechanical improvement in Cu matrix composites reinforced with graphene nanosheets decorated with Ni nanoparticles (GNS-Ni) hybrids, leading to a 61% increase in Young γs modulus (132 GPa) and a 94% improvement in yield strength (268 MPa) by adding only 1.0% GNSs.
Journal ArticleDOI
Copper matrix SiC and Al2O3 particulate composites by powder metallurgy technique
TL;DR: In this article, a copper matrix reinforced with either Ni-coated or uncoated SiC and Al 2 O 3 particulate composites was made by means of the powder metallurgy route.