Proceedings ArticleDOI
Modelling and simulation of solar photovoltaic fed induction motor for water pumping application using perturb and observer MPPT algorithm
Geet Jain,V. K. Arun Shankar,Subramaniam Umashankar +2 more
- pp 250-254
TLDR
In this article, a photovoltaic array fed water pumping system utilizing induction motor with the model developed in Matlab/Simulink is presented, where MPPT technique plays an important role that is developed in MATLAB and the outputs are observed.Abstract:
This work focuses on the photovoltaic array fed water pumping system utilizing induction motor with the model developed in Matlab/Simulink. PV system is designed to avail the solar energy by means of Photovoltaic cells. It consists of an arrangement of several components, including solar panels to absorb and convert sunlight into electricity. Maximum Power Point Tracking is a technique used to maximize power output from the Photovoltaic module and finally a 3 phase induction motor is driven through it. In this paper a Photovoltaic array is used to run a induction motor that drives the centrifugal pump. The simulink model of the PV array connected to induction motor where MPPT technique (perturb and observable) plays an important role that is developed in MATLAB and the outputs are observed.read more
Citations
More filters
Journal ArticleDOI
A Global Stability of Linearizing Control of Induction Motor for PV Water Pumping Application
TL;DR: A global stability and robust nonlinear controller is proposed, applied to induction motor (IM), in order to achieve an exact decoupling between speed and flux for all motor operating conditions.
Journal ArticleDOI
Modeling and simulation of solar irrigation system with IM drive using PWM controller
TL;DR: In this article , a solar-powered irrigation pumping system is described, in which the functioning of a three-phase induction motor coupled pump system is powered by solar energy, and the boost converter is used to regulate the voltage of the PV system.
Journal ArticleDOI
Standalone photovoltaic array fed induction motor driven water pumping system
TL;DR: In this paper, the output power of a PV solar cell is fully used by proposing the P&O algorithm, where it is used to follow a maximum power point tracking (MPPT) technique.
Proceedings ArticleDOI
An Efficient Solar Energized Water Pump Using High Gain Boost Converter
Anjanee Kumar Mishra,Bhim Singh +1 more
TL;DR: This paper presents a HGBC (High Gain Boost Converter) integrated with solar PV (Photovoltaic) array for water pumping system utilizing SRM (Switched Reluctance Motor) drive that has approximately double the voltage gain with better conversion performance and power density as compared to classical boost converter.
Proceedings ArticleDOI
Investigations on performance evaluation of VFD fed PMSM using DTC control strategies for pumping applications
TL;DR: This paper presents a comprehensive study of various control strategies on PMSM fed with the centrifugal pump like conventional DTC, DTC with Space Vector Modulation, and various performance parameters of both motor as well as pump are evaluated and compared through matlab simulation.
References
More filters
Journal ArticleDOI
Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques
Trishan Esram,Patrick L. Chapman +1 more
TL;DR: The many different techniques for maximum power point tracking of photovoltaic (PV) arrays are discussed in this paper, and at least 19 distinct methods have been introduced in the literature, with many variations on implementation.
Journal ArticleDOI
Optimization of perturb and observe maximum power point tracking method
TL;DR: In this article, the perturb and observe (PO) algorithm is used in photovoltaic (PV) systems to maximize the PV array output power by tracking continuously the maximum power point (MPP) which depends on panels temperature and on irradiance conditions.
Journal ArticleDOI
Direct self-control (DSC) of inverter-fed induction machine
TL;DR: Direct self-control (DSC) as discussed by the authors is a simple method of signal processing that gives converter-fed three-phase machines an excellent dynamic performance, and it is sufficient to process the measured signals of the stator currents and the total flux linkages only.
Journal ArticleDOI
A Comparative Study on Maximum Power Point Tracking Techniques for Photovoltaic Power Systems
TL;DR: In this paper, a comprehensive review of the MPPT techniques applied to photovoltaic (PV) power system available until January, 2012 is provided, which is intended to serve as a convenient reference for future MPPT users in PV systems. But, confusion lies while selecting a MPPT as every technique has its own merits and demerits.
Journal ArticleDOI
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
TL;DR: In this paper, a buck-type DC/DC converter is used to maximize the photovoltaic array output power, irrespective of the temperature and irradiation conditions and of the load electrical characteristics.