Journal ArticleDOI
Optimization by Grey relational analysis of EDM parameters on machining Al–10%SiCP composites
TLDR
In this paper, the multi-response optimization of the process parameters viz., metal removal rate (MRR), tool wear rate (TWR), taper (T), radial overcut (ROC), and surface roughness (SR) on electric discharge machining (EDM) of Al-10%SiC P as cast metal matrix composites using orthogonal array (OA) with Grey relational analysis is reported.About:
This article is published in Journal of Materials Processing Technology.The article was published on 2004-11-30. It has received 287 citations till now. The article focuses on the topics: Grey relational analysis & Taguchi methods.read more
Citations
More filters
Journal ArticleDOI
Review of research work in sinking EDM and WEDM on metal matrix composite materials
TL;DR: A review of EDM process and year wise research work done in EDM on metal matrix composites is presented in this article, which also discusses the future trend of research work in the same area.
Journal ArticleDOI
Experimental investigation and optimisation in drilling of GFRP composites
TL;DR: In this paper, an effective approach for the optimisation of drilling parameters with multiple performance characteristics based on the Tagugch's method with grey relational analysis has been presented, where the results indicate that the performance of drilling process can be improved effectively through this approach.
Journal ArticleDOI
Grey relational analysis coupled with principal component analysis for optimization design of the cutting parameters in high-speed end milling
TL;DR: In this paper, a grey relational analysis that uses grey relational grade as performance index is specially adopted to determine the optimal combination of cutting parameters for rough cutting processes in high-speed end milling on SKD61 tool steel.
Journal ArticleDOI
Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis
Jong Hyuk Jung,Won Tae Kwon +1 more
TL;DR: In this article, the optimal machining conditions under which the micro-hole can be formed to a minimum diameter and a maximum aspect ratio were determined by using the Grey relational analysis theory to resolve the complicated interrelationships among the multiple performance characteristics.
Journal ArticleDOI
Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools
TL;DR: In this article, the application of grey relational theory and Taguchi optimization methodology in order to optimize the cutting parameters for PolyEtherEtherKeytone reinforced with 30% of carbon fibers was presented.
References
More filters
Journal ArticleDOI
Introduction to Grey system theory
TL;DR: The Grey Systeni and its applications are interdisciplinary, cutting across a variety of specialized fields, and it is evident that Grey System theory stands the test of time since 1982 as mentioned in this paper.
Book
Taguchi techniques for quality engineering
TL;DR: Taguchi as discussed by the authors presented Taguchi Techniques for Quality Engineering (TQE), a technique for quality engineering in the field of high-level geometry. Technometrics: Vol. 31, No. 2, pp. 253-255.
Book
An introduction to metal matrix composites
T.W. Clyne,Philip J. Withers +1 more
TL;DR: In this article, the Eshelby approach is used to model composites and a program for calculating the S-tensors of a composite model is presented, along with a list of programs for an Eshelbys calculation.
Journal ArticleDOI
The use of the orthogonal array with grey relational analysis to optimize the electrical discharge machining process with multiple performance characteristics
TL;DR: In this article, a new approach for the optimization of the electrical discharge machining (EDM) process with multiple performance characteristics based on the orthogonal array with the grey relational analysis has been studied.
Journal ArticleDOI
Non-conventional machining of particle reinforced metal matrix composite
F Müller,J. Monaghan +1 more
TL;DR: In this article, the machinability of SiC particle reinforced aluminium matrix composites using non-conventional machining processes such as Electro Discharge Machining (EDM), laser cutting and Abrasive Water Jet (AWJ) was investigated.