Open AccessBook
Phase Diagrams and Thermodynamic Properties of Ternary Copper-Sulfur-Metal Systems
Reads0
Chats0
TLDR
In this paper, phase diagram and thermodynamic data for twenty ternary copper-silver-X alloy systems were compiled and evaluated, where X represents Al,Au,Cd,Fe,Ge,In,Mg,Mn,Ni,P,Pb,Pd,Re,S,Sb,Se,Sn,Te,Ti or Zn.Abstract:
Phase diagram and thermodynamic data for twenty ternary copper‐silver‐X alloy systems—where X represents Al,Au,Cd,Fe,Ge,In,Mg,Mn,Ni,P,Pb,Pd,Re,S,Sb,Se,Sn,Te,Ti or Zn—were compiled and critically evaluated. Of the twenty ternary systems, thermodynamic data are available for only the seven systems containing Au,Pb,Pd,S,Sn,Te and Zn. The high‐temperature phase relationships in the iron‐rich region of the Cu‐Fe binary system were also evaluated and a recommended phase diagram is presented.read more
Citations
More filters
Journal ArticleDOI
Some observations on the wetting and bonding of nitride ceramics
TL;DR: In this article, it was found that bonds formed by brazing with aluminium at 1000 °C could have shear strengths as great as 60MPa, which suggested that good brazings systems could be developed.
Journal ArticleDOI
Thermodynamic analysis of the iron-copper system I: The stable and metastable phase equilibria
TL;DR: In this paper, the stable and metastable equilibria of the Fe-Cu system were derived using the thermodynamic equations derived from equilibrium data, and the calculated metastable miscibility gap of the liquid phase also agrees with the experimental data.
Journal ArticleDOI
Phase diagrams for lead-free solder alloys
TL;DR: The need for new, improved solder alloys and a better understanding of reactions during the soldering process grows steadily as the need for smaller and more reliable electronic products increases as mentioned in this paper.
Journal ArticleDOI
The Al-Cu-Fe phase diagram: 0 to 25 At. pct Fe and 50
TL;DR: In this paper, isothermal sections of the Al-Cu-Fe equilibrium phase diagram at temperatures from 680 °C to 800 °C were determined in the region with 50 to 75 at.pct Al and 0 to 25 at. pct Fe using scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS) techniques.
Journal ArticleDOI
Thermodynamic modeling of the Nb–Hf–Si ternary system
H. Liang,Y. A. Chang +1 more
TL;DR: In this paper, a thermodynamic description of the Nb-Si-Ti ternary system is developed by modeling the Gibbs energies of the individual phases in the system, which is obtained primarily by extrapolation based on the descriptions of the constituent binary systems.