Products made from nonmetallic materials reclaimed from waste printed circuit boards
TLDR
In this paper, a study of the reclaimation and reuse of non-metallic materials recovered from waste printed circuit boards (PCBs) was presented, and the recovered nonmetals were used to make models, construction materials, composite boards, sewer grates, and amusement park boats.About:
This article is published in Tsinghua Science & Technology.The article was published on 2007-06-01 and is currently open access. It has received 64 citations till now.read more
Citations
More filters
Journal ArticleDOI
Mechanical and chemical recycling of solid plastic waste.
TL;DR: This review presents a comprehensive description of the current pathways for recycling of polymers, via both mechanical and chemical recycling, and discusses the main challenges and some potential remedies to these recycling strategies, thus providing an academic angle as well as an applied one.
Journal ArticleDOI
Waste Printed Circuit Boards recycling: an extensive assessment of current status
Biplab Ghosh,Biplab Ghosh,Malay K. Ghosh,Malay K. Ghosh,Pankaj Kumar Parhi,Priyanka Mukherjee,Priyanka Mukherjee,Brahmeshwar Mishra,Brahmeshwar Mishra +8 more
TL;DR: More than 150 related articles mostly published in the last 15 years and covering the broad areas like characterization of waste printed circuit boards, health hazards associated with the processing and the different routes of recycling have been analyzed to provide a comprehensive overview on this topic as discussed by the authors.
Journal ArticleDOI
Recycling of non-metallic fractions from waste printed circuit boards: a review.
Jiuyong Guo,Jie Guo,Zhenming Xu +2 more
TL;DR: The major economic driving force for recycling of waste printed circuit boards (PCBs) is the value of the metallic fractions (MFs) of PCBs, and chemical recycling methods have the advantages in eliminating hazardous substances in the NMFs.
Journal ArticleDOI
Disposing and recycling waste printed circuit boards: disconnecting, resource recovery, and pollution control.
Jianbo Wang,Zhenming Xu +1 more
TL;DR: Waste printed circuit boards (WPCBs), which are the most complex, hazardous, and valuable components of e-waste, are selected as one typical example in this article that reviews the status of related regulations and technologies of WPCBs recycling, then optimizes, and integrates the proper approaches in existence, while the bottlenecks in the WPCB recycling system are analyzed.
Journal ArticleDOI
Response to waste electrical and electronic equipments in China: legislation, recycling system, and advanced integrated process.
Lei Zhou,Zhenming Xu +1 more
TL;DR: In order to achieve high disposal rates of WEEE, high-quantify separation of different materials in WEEE and high added value final products produced by separated materials from WEEE), an idea of integrated WEEE recycling system is proposed to point future development of WEE recycling industry.
References
More filters
Journal ArticleDOI
Printed circuit board recycling: a state-of-the-art survey
TL;DR: In this article, the authors present a review of current practices and recent developments in the area of printed circuit board (PCB) recycling and provide a reference for research and implementation for the PCB recycling process.
Journal ArticleDOI
Chemical recycling of glass fiber reinforced epoxy resin cured with amine using nitric acid
TL;DR: Dang et al. as discussed by the authors investigated the applicability of the proposed approach to glass fiber reinforced bisphenol F type epoxy resin cured with diamino diphenyl methane (DDM).
Journal ArticleDOI
An approach to chemical recycling of epoxy resin cured with amine using nitric acid
TL;DR: An approach to chemical recycling of epoxy resins was pursued in this article, where the results obtained from differential scanning calorimeter (DSC) showed that the glass transition temperature (T g ) of recycled resins is higher than that of virgin resins.
Journal ArticleDOI
Characterization of thermally reworkable thermosets: materials for environmentally friendly processing and reuse
TL;DR: In this article, a cycloaliphatic epoxy monomer that contains a tertiary ester linkage was studied and the degradation process of the monomer and resulting polymer networks as a function of their rework conditions.
Proceedings ArticleDOI
Recycling of printed wiring boards with mounted electronic parts
S. Yokoyama,M. Iji +1 more
TL;DR: In this paper, a practical technology has been developed for the recycling of printed wiring boards (PWBs) with electronic parts mounted on them, where the electronic parts on the PWBs were effectively removed by combination of heating to above the melting point of solder and applying such external forces as impact, shear and vibration.
Related Papers (5)
Recycling of waste printed circuit boards: a review of current technologies and treatment status in China.
Kui Huang,Jie Guo,Zhenming Xu +2 more
Separation and recovery of materials from scrap printed circuit boards
William J. Hall,Paul T. Williams +1 more