Journal ArticleDOI
SiC foams produced by gel casting: Synthesis and characterization
TLDR
In this article, the preparation and characterization of the powder suspension using silicon carbide powders has been discussed, which has been recognized as a high performance material and has been shown to be mechanically stronger than polyurethane replica methods.Abstract:
SiC foams were fabricated by gelcasting with a commercially available powder and agar as gelling agent. Ceramic foams processed by gel casting have dense struts and are therefore mechanically stronger than foams produced by the conventional poly-urethane replica method. First, special attention was given to the preparation and characterization of the powder suspension using silicon carbide powders which has been recognized as a high performance material.read more
Citations
More filters
Journal ArticleDOI
Processing Routes to Macroporous Ceramics: A Review
TL;DR: In this paper, the main processing routes that can be used for the fabrication of macroporous ceramics with tailored microstructure and chemical composition are reviewed and compared in terms of microstructures and mechanical properties.
Journal ArticleDOI
Processing and properties of macroporous silicon carbide ceramics: A review
TL;DR: Macroporous silicon carbide is widely used in various industrial applications including filtration for gas and water, absorption, catalyst supports, concentrated solar power, thermoelectric....
Journal ArticleDOI
Gelcasting of alumina foams using agarose solutions
TL;DR: In this paper, the procedure for preparing concentrated agarose solutions by dissolving under overpressure conditions was evaluated for the gelcasting of alumina foams, and the rheological behavior of the alumina suspensions containing agaroses was studied.
Journal ArticleDOI
Numerical investigation on the flow characteristics and permeability of three-dimensional reticulated foam materials
TL;DR: In this article, a 3D model was proposed for predicting the flow characteristics and permeability of three-dimensional reticulated foam materials, which were prepared by replication process, and parameters, such as permeability, inertia coefficient, and friction factor, were obtained in order to describe the fluid flow characteristics of porous media.
Journal ArticleDOI
Gas permeability and adsorbability of the glass-bonded porous silicon carbide ceramics with controlled pore size
TL;DR: In this article, the influence of microstructure on the gas permeability and the adsorption force between chucking work-pieces and porous SiC ceramic vacuum chuck was investigated.
Related Papers (5)
Processing of cellular ceramics by foaming and in situ polymerisation of organic monomers
P Sepulveda,Jon Binner +1 more