Journal ArticleDOI
Tuning of final performances of unsaturated polyester composites with inorganic microsphere/platelet hybrid reinforcers
Sinan Şen,Nihan Nugay +1 more
Reads0
Chats0
TLDR
Physical properties of fly ash/mica hybrid reinforced unsaturated polyester composites in both uncured and cured state have been studied with special reference to the effect of loading composition, nature of filler surfaces and surface treatment of fillers as discussed by the authors.About:
This article is published in European Polymer Journal.The article was published on 2001-10-01. It has received 26 citations till now. The article focuses on the topics: Silanization.read more
Citations
More filters
Journal ArticleDOI
Mechanical and morphological properties of fly ash/epoxy composites using conventional thermal and microwave curing methods
TL;DR: In this article, the authors evaluated the properties of fly ash/epoxy composites and found that the tensile and flexural moduli of the composites increased with increasing fly ash content while the effect became opposite for tensile, flexural and impact strengths, and tensile strain at break.
Journal ArticleDOI
Fillers for polysiloxane (“silicone”) elastomers
Donald R Paul,James E. Mark +1 more
TL;DR: A review of alternative fillers for polysiloxane elastomers can be found in this paper, with some comments on their possible advantages and disadvantages, as well as a comparison of different fillers.
Book ChapterDOI
Unsaturated Polyester Resins: Chemistry and Technology
TL;DR: Results of investigations on novel formulations, structure-property relationships, curing, and compositions with fillers and reinforcing fibers (1997--2004) are reviewed with about 200 references to articles and several references to patents as mentioned in this paper.
Journal ArticleDOI
Curing characteristics, tensile properties and morphology of palm ash/halloysite nanotubes/ethylene-propylene-diene monomer (EPDM) hybrid composites
H. Ismail,S.M. Shaari +1 more
TL;DR: In this article, the effects of palm ash/halloysite nanotube weight ratio on the curing characteristics, tensile properties and morphology of the hybrid composites were studied, which indicated that HNTs has better adhesion to the EPDM matrix as compared to palm ash.
Journal ArticleDOI
Mechanical behavior of GRP pressure pipes with addition of quartz sand filler
José Daniel Diniz Melo,Flaminio Levy Neto,Gustavo de Araujo Barros,Fausto Nogueira de Almeida Mesquita +3 more
TL;DR: In this article, an alternative to reduce the final price of glass-reinforced plastic (GRP) pipes is the addition of quartz sand filler, which can reduce the cost of fabrication.
References
More filters
Book
Encyclopedia of polymer science and engineering
TL;DR: In this paper, the authors describe a chain transfer characterisation of polymers charge-transfer complexes, charge transfer complexes and charge transfer complexes of charge transfer and charge-Transfer complexes.
Journal ArticleDOI
Mechanical properties of particulate filled polymers
TL;DR: In this article, the mechanical properties of several types of inorganic fillers were investigated in a number of different thermoplastic polymers, including General Electric's Noryl, acrylonitrile-butadiene-styrene terpolymer, polypropylene, and modified polyethylene.
Journal ArticleDOI
An investigation of the coupling agent/matrix interface of fiberglass reinforced plastics by fourier transform infrared spectroscopy
Hatsuo Ishida,Jack L. Koenig +1 more
TL;DR: In this paper, a high surface area silica powder is used to study the coupling agent/matrix interface and the structural basis for the mechanical performances of fiberglass reinforced plastics (FRP) is studied on the molecular level using Fourier transform infrared spectroscopy (FT-IR).
Journal ArticleDOI
Property optimization in nitrile rubber composites via hybrid filler systems
Nihan Nugay,Burak Erman +1 more
TL;DR: In this paper, the effect of the silane treatment of mica, the degree of replacement, and the molecular architecture of nitrile rubbers on static-dynamic mechanical, swelling, and curing behavior of the resultant composites are discussed.
Related Papers (5)
Strength Characterization of E-glass Fiber Reinforced Epoxy Composites with Filler Materials
K. Devendra,T. Rangaswamy +1 more