scispace - formally typeset
Journal ArticleDOI

Waste Newsprint Fibers For Reinforcement Of Radiation-cured Styrene Butadiene Rubber-Based Composites Part i: Mechanical and Physical Properties

Reads0
Chats0
TLDR
In this paper, waste newsprint paper fiber was treated by polystyrene emulsion and included as a filler in styrene butadiene rubber, and the composites were subjected to electron beam irradiation at different irradiation doses, and follow-up was done on the effect of irradiation dose and fiber concentration on mechanical and physical properties of prepared composites.
Abstract
In this study, waste newsprint paper fiber was treated by polystyrene emulsion and included as a filler in styrene butadiene rubber. Then, the composites were subjected to electron beam irradiation at different irradiation doses, and follow-up was done on the effect of irradiation dose and fiber concentration on mechanical and physical properties of prepared composites. The results indicated that the mechanical properties like tensile strength, elongation at break, stiffness, and toughness were enhanced by the increase of radiation and fiber content. Also, the physical properties like soluble fraction, swelling ratio, and volume fraction of rubber in swollen gel were enhanced by the increase of radiation and fiber content. On the other hand, scanning electron microscope (SEM) results confirmed that adhesion was situated between fiber and rubber matrix.

read more

Citations
More filters
Journal ArticleDOI

Study on the technical feasibility of replacing glass fibers by old newspaper recycled fibers as polypropylene reinforcement

TL;DR: In this article, a coupling agent was added to the compound to improve the interface between matrix and reinforcing fibers, and a tensile test was performed to obtain the mechanical properties of the composite materials.
Journal ArticleDOI

Mechanical and micromechanical tensile strength of eucalyptus bleached fibers reinforced polyoxymethylene composites

TL;DR: In this paper, the tensile strength of natural fiber polyoxymethylene composites has been compared with natural fiber reinforced polypropylene, and comparable to uncoupled fiberglass polypropylon composites.
Journal ArticleDOI

Tensile Properties of Polypropylene Composites Reinforced with Mechanical, Thermomechanical, and Chemi-Thermomechanical Pulps from Orange Pruning

TL;DR: In this paper, the evolution in the tensile strength and morphological properties of fiber-reinforced polypropylene composites were analyzed. And the effect of treatments on these properties were analyzed using modified rule of mixtures (mROM).
Journal ArticleDOI

Effect of gamma irradiation on some properties of reclaimed rubber/nitrile–butadiene rubber blend and its swelling in motor and brake oils

TL;DR: In this paper, the compounding of the blend factors has been elaborated using Fourier transform infra-red spectroscopy and scanning electron microscopy (SEM) to obtain different properties of the synthesized unirradiated and irradiated blends such as tensile strength, elongation at break, hardness, swelling behavior in motor and brake oils and thermal stability were investigated with respect to the RRP content.
Journal ArticleDOI

Enhancing physico-mechanical and antibacterial properties of natural rubber using synthesized Ag-SiO2 nanoparticles

TL;DR: It was found that SiO2 acted as crosslinking agent and controlling the amount of silver release as well as uniform distribution of Ag-SiO2 core-shell into rubber matrix with enhanced tensile strength.
References
More filters
Journal ArticleDOI

Statistical mechanics of cross-linked polymer networks ii. swelling

TL;DR: In this paper, the interaction of solvents with cross-linked network structures, such as occur in vulcanized rubber, is subjected to a statistical mechanical treatment based on the model and procedure presented in the preceding paper.
Journal ArticleDOI

Statistical Mechanics of Cross‐Linked Polymer Networks I. Rubberlike Elasticity

TL;DR: In this paper, a model for the structure of a cross-linked network, such as exists in a vulcanized rubber, which is amenable to statistical treatment, is proposed, and expressions for the structural entropy of the network, and for the entropy change on deformation.
BookDOI

Handbook of elastomers

TL;DR: Guayule rubber Hevea natural rubber modified natural rubber chemical modification of synthetic elastomers liquid rubber powdered rubber rubber rubber-rubber blends - part 1 rubber-Rubber blends as mentioned in this paper.
Journal ArticleDOI

Applications for radiation processing of materials

TL;DR: In this article, the physical and chemical properties of polymeric materials can be modified by treatment with ionizing radiation in the form of gamma rays, X-rays and energetic electrons.
Journal ArticleDOI

Short Jute Fiber Reinforced Carboxylated Nitrile Rubber

TL;DR: In this article, it was shown that the aging resistance of XNBR-jute fiber composites is increased with the addition of jute fiber to the bonding agent and fibers.
Related Papers (5)