Showing papers on "Atmospheric-pressure chemical ionization published in 2022"

Chemical reaction monitoring by ambient mass spectrometry.

Abstract: Chemical reactions conducted in different media (liquid phase, gas phase, or surface) drive developments of versatile techniques for the detection of intermediates and prediction of reasonable reaction pathways. Without sample pretreatment, ambient mass spectrometry (AMS) has been applied to obtain structural information of reactive molecules that differ in polarity and molecular weight. Commercial ion sources (e.g., electrospray ionization, atmospheric pressure chemical ionization, and direct analysis in real-time) have been reported to monitor substrates and products by offline reaction examination. While the interception or characterization of reactive intermediates with short lifetime are still limited by the offline modes. Notably, online ionization technologies, with high tolerance to salt, buffer, and pH, can achieve direct sampling and ionization of on-going reactions conducted in different media (e.g., liquid phase, gas phase, or surface). Therefore, short-lived intermediates could be captured at unprecedented timescales, and the reaction dynamics could be studied for mechanism examinations without sample pretreatments. In this review, via various AMS methods, chemical reaction monitoring and mechanism elucidation for different classifications of reactions have been reviewed. The developments and advances of common ionization methods for offline reaction monitoring will also be highlighted.

Development of a Tube Plasma Ion Source for Gas Chromatography-Mass Spectrometry Analysis and Comparison with Other Atmospheric Pressure Ionization Techniques.

Abstract: A tube plasma ionization (TPI) open-air source for gas chromatography-mass spectrometry (GC-MS) was developed. This source is based on an inverse low temperature plasma configuration where the pin inner electrode is applying the high voltage and the grounded electrode is the housing itself. The ionization possibilities were tested by using an EPA mix of priority contaminants, showing that 68% of the analytes could undergo both proton-transfer and charge-exchange reactions. The potential of using different discharge gases (He and Ar) to ionize the analytes and auxiliary gases (He, N2, O2, and synthetic air) to transport the ions toward the MS was carefully investigated. Additionally, the addition of water was also tested to show the different ionization trends in the TPI source. Finally, the ionization by TPI under both dry and wet conditions was compared with other gas-phase atmospheric pressure ionization sources showing TPI could ionize a wider range of compounds (97%) than atmospheric pressure chemical ionization (APCI, 95%) and atmospheric pressure photoionization (APPI, 87%). Besides, the detection capability of TPI was better than APCI and APPI, achieving instrumental limits of detection down to 3 fg on column, which demonstrates the great potential of this ionization source for GC-MS determinations.

Development, validation, and estimation of measurement uncertainty for the quantitative determination of nitrosamines in Sartan drugs using Liquid Chromatography-Atmospheric Pressure Chemical Ionization-Tandem Mass Spectrometry

Abstract: • Development and validation of LC-APCI-MS/MS method for eight nitrosamines. • The method developed and validated meets FDA requirments for nitrosamines. • First time, evaluated the MU for nitrosamines analysis by LC-MS/MS. In the current study, a feasible and sensitive liquid chromatography-atmospheric pressure chemical ionization tandem mass spectrometry (LC-APCI-MS/MS) method was developed and validated for the determination of eight nitrosamines in Sartan active pharmaceutical ingredients (APIs). The proposed LC-APCI-MS/MS method was validated as per regulatory guidelines. The limit of detection and limit of quantification was found to be in the range of 0.32–1.58 ng/mL, 1.09–4.74 ng/mL, and the recovery was in the range of 86.4–109.6% for Sartan APIs, and 82.1–114.1% for Sartan final products, respectively. The calibration curves of all nitrosamines in the concentration range of 2–100 ng/mL were carried out, and the coefficient of determination ( R 2 ) was found to be in the range of 0.9990–0.9999. The robustness of the present method was within the acceptance (<15% RSD) for system suitability. The measurement uncertainty was determined for this method, and the expanded uncertainty was found to be in the range of 16.3–25.9% for Sartan APIs and 8.41–15.6% for Sartan drug products. The precision and recovery were found to be major sources which can induce the uncertainty during the measurement of nitrosamines in Sartan API and Drug products with the developed and validated method.

Quantitative analysis of polycyclic aromatic hydrocarbons using high‐performance liquid chromatography‐photodiode array‐high‐resolution mass spectrometric detection platform coupled to electrospray and atmospheric pressure photoionization sources

Abstract: Polycyclic aromatic hydrocarbons (PAHs) are common pollutants present in atmospheric aerosols and other environmental mixtures. They are of particular air quality and human health concerns as many of them are carcinogenic toxins. They also affect absorption of solar radiation by aerosols, therefore contributing to the radiative forcing of climate. For environmental chemistry studies, it is advantageous to quantify PAH components using the same analytical technics that are commonly applied to characterize a broad range of polar analytes present in the same environmental mixtures. Liquid chromatography coupled with photodiode array and high-resolution mass spectrometric detection (LC-PDA-HRMS) is a method of choice for comprehensive characterization of chemical composition and quantification of light absorption properties of individual organic compounds present in the environmental samples. However, quantification of non-polar PAHs by this method is poorly established because of their imperfect ionization in electrospray ionization (ESI) technique. This tutorial article provides a comprehensive evaluation of the quantitative analysis of 16 priority pollutant PAHs in a standard reference material using the LC-MS platform coupled with the ESI source. Results are further corroborated by the quantitation experiments using an atmospheric pressure photoionization (APPI) method, which is more sensitive for the PAH detection. The basic concepts and step-by-step practical guidance for the PAHs quantitative characterization are offered based on the systematic experiments, which include (1) Evaluation effects of different acidification levels by formic acid on the (+)ESI-MS detection of PAHs. (2) Comparison of detection limits in ESI+ versus APPI+ experiments. (3) Investigation of the PAH fragmentation patterns in MS2 experiments at different collision energies. (4) Calculation of wavelength dependent mass absorption coefficient (MACλ ) of the standard mixture and its individual PAHs using LC-PDA data. (5) Assessment of the minimal injected mass required for accurate quantification of MACλ of the standard mixture and of a multi-component environmental sample.

First Novel Workflow for Semiquantification of Emerging Contaminants in Environmental Samples Analyzed by Gas Chromatography–Atmospheric Pressure Chemical Ionization–Quadrupole Time of Flight–Mass Spectrometry

Abstract: The ionization efficiency of emerging contaminants was modeled for the first time in gas chromatography-high-resolution mass spectrometry (GC-HRMS) which is coupled to an atmospheric pressure chemical ionization source (APCI). The recent chemical space has been expanded in environmental samples such as soil, indoor dust, and sediments thanks to recent use of high-resolution mass spectrometric techniques; however, many of these chemicals have remained unquantified. Chemical exposure in dust can pose potential risk to human health, and semiquantitative analysis is potentially of need to semiquantify these newly identified substances and assist with their risk assessment and environmental fate. In this study, a rigorously tested semiquantification workflow was proposed based on GC-APCI-HRMS ionization efficiency measurements of 78 emerging contaminants. The mechanism of ionization of compounds in the APCI source was discussed via a simple connectivity index and topological structure. The quantitative structure–property relationship (QSPR)-based model was also built to predict the APCI ionization efficiencies of unknowns and later use it for their quantification analyses. The proposed semiquantification method could be transferred into the household indoor dust sample matrix, and it could include the effect of recovery and matrix in the predictions of actual concentrations of analytes. A suspect compound, which falls inside the application domain of the tool, can be semiquantified by an online web application, free of access at http://trams.chem.uoa.gr/semiquantification/.

Simultaneous Determination of Vitamin D and Its Hydroxylated and Esterified Metabolites by Ultrahigh-Performance Supercritical Fluid Chromatography–Tandem Mass Spectrometry

Abstract: In this study, an analytical method has been developed that, for the first time, allows simultaneous determination of vitamin D2 and vitamin D3 along with their hydroxylated and esterified forms. A group of 12 vitamin D analogues including vitamin D2 and vitamin D3, seven hydroxylated metabolites, and three ester forms were separated in a single 8.0 min run using ultrahigh-performance supercritical fluid chromatography coupled with triple quadrupole tandem mass spectrometry. Electrospray ionization and atmospheric pressure chemical ionization were investigated as ion sources, of which the latter showed a higher ionization efficiency. Chromatographic conditions were thoroughly evaluated by a step-by-step method, whereas an experimental design was applied for the optimization of the ionization parameters. Calibration and repeatability studies were carried out to validate the instrumental methodology showing determination coefficients higher than 0.9992 and good intra- and interday precision with relative standard deviations for areas and retention times lower than 10 and 2.1%, respectively, for all target analytes. Limits of quantification were below 3.03 μg/L for all compounds. The methodology was then validated and applied for the evaluation of human plasma samples in order to demonstrate its applicability to the analysis of vitamin D analogues in biological samples. Samples of five individuals were analyzed. Results show that linoleate-D3, vitamin D2, vitamin D3, 25-hydroxyvitamin D2, 24,25-dihydroxyvitamin D3, and 1,25-dihydroxyvitamin D3 could be detected in most samples, while the two latter also were quantified in all analyzed samples.

Differential Organic Contaminant Ionization Source Detection and Identification in Environmental Waters by Nontargeted Analysis

Abstract: The development of nontargeted analysis (NTA) methods to assess environmental contaminants of emerging concern, which are not commonly monitored, is paramount, especially when no previous knowledge on the identity of the pollution source is available. We compared complementary ionization techniques, namely electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI), in the detection and identification of organic contaminants in tap and surface waters from South Florida. Furthermore, the performance of a simple rationalized NTA method was assessed by analyzing 10 complex mixtures as part of the US Environmental Protection Agency's Non-targeted Analysis Collaborative Trial interlaboratory study, where limitations of the NTA approach have been identified (e.g., number of employed databases, false positives). Different water bodies displayed unique chemical features that can be used as chemical fingerprints for source tracking and discrimination. The APCI technique detected at least threefold as many chemical features as ESI in environmental water samples, corroborating the fact that APCI is more energetic and can ionize certain classes of compounds that are traditionally difficult to ionize by liquid chromatography-mass spectrometry. Kendrick mass defect plots and Van Krevelen diagrams were applied to elucidate unique patterns and theoretical chemical space regions of anthropogenic organic compounds belonging to homologous series or similar classes covered by ESI and APCI. Overall, APCI and ESI were established as complementary, expanding the detected NTA chemical space which would otherwise be underestimated by a single ionization source operated in a single polarity setting. Environ Toxicol Chem 2022;41:1154-1164. © 2021 SETAC.

Supercritical Fluid Chromatography—Tandem Mass Spectrometry for Rapid Quantification of Pentacyclic Triterpenoids in Plant Extracts

Abstract: Pentacyclic triterpenoids (PCTs) are a widely distributed class of plant secondary metabolites. These compounds have high bioactive properties, primarily antitumor and antioxidant activity. In this study, a method was developed for the quantitative analysis of pentacyclic triterpenoids in plants using supercritical fluid chromatography–tandem mass spectrometry (SFC-MS/MS). Separation of ten major PCTs (friedelin, lupeol, β-amyrin, α-amyrin, betulin, erythrodiol, uvaol, betulinic, oleanolic and ursolic acids) was studied on six silica-based reversed stationary phases. The best results (7 min analysis time in isocratic elution mode) were achieved on an HSS C18 SB stationary phase using carbon dioxide—isopropanol (8%) mobile phase providing decisive contribution of polar interactions to the retention of analytes. It was shown that the use of atmospheric pressure chemical ionization (APCI) is preferred over atmospheric pressure photoionization (APPI). The combination of SFC with APCI-MS/MS mass spectrometry made it possible to achieve the limits of quantification in plant extracts in the range of 2.3–20 μg·L−1. The developed method was validated and tested in the analyses of birch outer layer (Betula pendula) bark, and licorice (Glycyrrhiza glabra) root, as well as lingonberry (Vaccinium vitis-idaea), cranberry (Vaccinium oxycoccos), apple (Malus domestica “Golden Delicious” and Malus domestica “Red Delicious”) peels.

Development of cVSSI-APCI for the Improvement of Ion Suppression and Matrix Effects in Complex Mixtures.

Abstract: The new ionization technique termed vibrating sharp-edge spray ionization (cVSSI) has been coupled with corona discharge to investigate atmospheric pressure chemical ionization (APCI) capabilities. The optimized source was evaluated for its ability to enhance ion signal intensity, overcome matrix effects, and limit ion suppression. The results have been compared with state-of-the-art ESI source performance as well as a new APCI-like source. In methanol, the ion signal intensity increased 10-fold and >10-fold for cocaine and the suppressed analytes, respectively. The ability to overcome ion suppression was improved from 2-fold to 16-fold for theophylline and vitamin D2, respectively. For aqueous samples, ion signal levels increased by two orders of magnitude for all analytes. In both solvent systems, the signal-to-noise ratios also increased for all suppressed analytes. One example of the characterization of low-ionizing (by ESI or cVSSI alone) species in the presence of high-ionizing species by direct analysis from a cotton swab is presented. The work is discussed with respect to the advantages of cVSSI-APCI for direct, in situ, and field analyses.

Ultra-high-performance liquid chromatography-atmospheric pressure ionization-tandem mass spectrometry method for the migration studies of primary aromatic amines from food contact materials

Abstract: This work describes the development of an ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for the determination of 23 primary aromatic amines (PAAs) that can potentially migrate from food contact materials. The chromatographic separation was performed in a pentafluorophenylpropyl (PFPP) column achieving the separation of all PAAs in less than 6.5 min using water to acetonitrile (0.1% acetic acid in both solvents) as mobile phase and a gradient elution. The feasibility of atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) was evaluated as alternative to electrospray ionization (ESI) for the analysis of PAAs. Results showed that for most of the compounds, better responses were obtained with APCI, which shows the advantage of being less susceptible to matrix effects. Tandem mass spectrometry (MS/MS) fragmentation studies of [M + H]+ allowed for the selection of the two most characteristic and abundant product ions of the 23 PAAs which led to the development of a selective and sensitive UHPLC-APCI-MS/MS method with limits of detection ranging from 0.2 to 2 μg kg-1. Moreover, intra-day and inter-day precisions of the method in terms of relative standard deviation (RSD%) were lower than 10% and 15%, while trueness as relative error was <15% for most of the compounds. The UHPLC-APCI-MS/MS method was applied to the analysis of twenty black Nylon kitchenware samples that were submitted to migration tests using food simulant B (3% acetic acid, w/v), and the presence of PAAs were detected in eighteen samples at concentrations above the legislated limit (2 μg kg-1 of food or food simulants).

Hands-on Inquiry-Based Qualitative Identification of Metals in Coins Utilizing Atmospheric Pressure Chemical Ionization Mass Spectrometry

Abstract: This paper describes the application of an accessible, benchtop mass spectrometer using an Atmospheric Solids Analysis Probe (ASAP) for easy sample introduction, coupled with Atmospheric Pressure Chemical Ionization (APCI) as a soft ionization technique, to the inquiry-based identification of the metal composition of alloys, including coins. Students experience the preparation of metal acetylacetonates via traditional salt metathesis and electrochemical methods. They are then encouraged to immediately apply these newly acquired skills to a novel research problem. The discovery aspect of the practical demonstrates opportunities to develop experimental design early in the undergraduate curriculum.

Potential of atmospheric pressure ionization sources for the analysis of free fatty acids in clinical and biological samples by gas chromatography-mass spectrometry

Abstract: Because of the central role of fatty acids in biological systems, their accurate quantification is still important. However, the impact of the complex matrix of biologically and clinically relevant samples such as plasma, serum, or cells makes the analysis still challenging, especially, when free non-esterified fatty acids have to be quantified. Here we developed and characterized a novel GC-MS method using pentafluorobenzyl bromide as a derivatization agent and compared different ionization techniques such as atmospheric pressure chemical ionization (APCI), atmospheric pressure chemical photoionization (APPI), and negative ion chemical ionization (NICI). The GC-APCI-MS showed the lowest limits of detection from 30 to 300 nM for a broad range of fatty acids and a similar response for various fatty acids from a chain length of 10 to 20 carbon atoms. This allows the number of internal standards necessary for accurate quantification to be reduced. Moreover, the use of pentafluorobenzyl bromide allows the direct derivatization of free fatty acids making them accessible for GC-MS analysis without labor-intense sample pretreatment.

Method for trace determination of N-nitrosamines impurities in metronidazole benzoate using high-performance liquid chromatography coupled with atmospheric-pressure chemical ionization tandem mass spectrometry.

Abstract: Genotoxic impurity control has been a great concern in the pharmaceutical industry since the recall of the large round of sartans worldwide in 2018. In these sartans, N-nitrosamines were the main contaminants in active pharmaceutical ingredients and formulations. Numerous analytical methods have been developed to detect N-nitrosamines in food, drugs, and environmental samples. In this study, a sensitive method is developed for the trace determination of N-nitrosamine impurities in metronidazole benzoate pharmaceuticals using high-performance liquid chromatography/atmospheric-pressure chemical ionization tandem mass spectrometry in the multiple reaction monitoring mode. The method was validated regarding system suitability, selectivity, linearity, accuracy, precision, sensitivity, solution stability, and robustness. The method showed good linearity with R2 ≥ 0.999 and FMandel < Ftab(95%) ranging from 0.33 to 8.00 ng/ml. The low limits of detection of N-nitrosamines were in the range of 0.22-0.80 ng/ml (0.0014-0.0050 ppm). The low limits of quantification were in the range of 0.33-1.20 ng/ml (0.0021-0.0075 ppm), which were lower than the acceptable limits in metronidazole benzoate pharmaceuticals and indicated the high sensitivity of the method. The recoveries of N-nitrosamines ranged from 84% to 97%. Thus, this method exhibits good selectivity, sensitivity, and accuracy. Moreover, it is a simple, convenient, and scientific strategy for detecting N-nitrosamine impurities in pharmaceuticals to support the development of the pharmaceutical industry.