Techniques for embedding silicon germanium (e-SiGe) source and drain stressors in nanoscale channel-based field effect transistors (FETs) are provided. In one aspect, a method of fabricating a FET includes the following steps. A doped substrate having a dielectric thereon is provided. At least one silicon (Si) nanowire is placed on the dielectric. One or more portions of the nanowire are masked off leaving other portions of the nanowire exposed. Epitaxial germanium (Ge) is grown on the exposed portions of the nanowire. The epitaxial Ge is interdiffused with Si in the nanowire to form SiGe regions embedded in the nanowire that introduce compressive strain in the nanowire. The doped substrate serves as a gate of the FET, the masked off portions of the nanowire serve as channels of the FET and the embedded SiGe regions serve as source and drain regions of the FET.

A p-FET with a Strained Nanowire Channel and Embedded SiGe Source and Drain Stressors

Using a classification scheme based on carrier confinement type (electrostatic and spatial) and the degrees of freedom of the mobile carriers (3DOF, 2DOF, and 1DOF), strain effects on 3DOF to 1DOF silicon logic devices are compared from quantum confinement and device geometry perspectives. For these varied device geometries and types, the effects of strain-induced band splitting and band warping on the modification of the average conductivity effective mass and carrier scattering rates are evaluated. It is shown that the beneficial effects of strain-induced band splitting are the most effective for devices with little or no initial band splitting and become less so for devices with already large built-in band splitting. For these devices with large splitting energy, the potential for strain-induced carrier conductivity mass reduction through repopulation of lower energy bands and the suppression of optical intervalley phonon scattering are limited. On the other hand, for all devices without spatial confin...

Strain effects on three-dimensional, two-dimensional, and one-dimensional silicon logic devices: Predicting the future of strained silicon

Investigation of sub-10nm cylindrical surrounding gate germanium nanowire field effect transistor with different cross-section areas

Techniques are disclosed for improved integration of germanium (Ge)-rich p-MOS source/drain contacts to, for example, reduce contact resistance. The techniques include depositing the p-type Ge-rich layer directly on a silicon (Si) surface in the contact trench location, because Si surfaces are favorable for deposition of high quality conductive Ge-rich materials. In one example method, the Ge-rich layer is deposited on a surface of the Si substrate in the source/drain contact trench locations, after removing a sacrificial silicon germanium (SiGe) layer previously deposited in the source/drain locations. In another example method, the Ge-rich layer is deposited on a Si cladding layer in the contact trench locations, where the Si cladding layer is deposited on a functional p-type SiGe layer. In some cases, the Ge-rich layer comprises at least 50% Ge (and may contain tin (Sn) and/or Si) and is boron (B) doped at levels above 1E20 cm −3 .

Techniques for integration of ge-rich p-mos source/drain contacts

Apart from excellent electrostatic capability and immunity to short-channel effects, the performance of gate-all-around (GAA) nanowire (NW) metal-oxide-semiconductor field-effect transistors (MOSFETs) can be further enhanced by incorporating strain. Owing to the technological importance of strained GAA (S-GAA) NW MOSFETs in modern electronics, we have proposed an analytical model of the threshold voltage and drain current for S-GAA NW MOSFETs taking into account the appreciable contributions of source (S) and drain (D) series resistances in the nanometer regime, along with quantum mechanical effect. We have focused on the elliptical cross section of the device as is necessary to consider the fabrication imperfections which give rise to such cross section, rather than an ideal circular structure. Incorporating S/D series resistance in the model of drain current demands for algorithms based on multi-iterative technique, which has been proposed in this paper for analyzing the impact of strain, NW width, aspect ratio and so on, on the performance of S-GAA NW devices with emphasis on CMOS digital circuits. Based on our proposed methodology, we have also investigated the scope of using high-k dielectric materials and metal gate in S-GAA NW structures.

Modeling gate-all-around Si/SiGe MOSFETs and circuits for digital applications

We report the first demonstration of pure germanium (Ge) source/drain (S/D) stressors on the ultranarrow or ultrathin Si S/D regions of nanowire FETs with gate lengths down to 5 nm. Ge S/D compressively strains the channel to provide up to ~ 100% I Dsat enhancement. We also introduce a novel Melt-Enhanced Dopant diffusion and activation technique to form fully embedded Si0.15Ge0.85 S/D stressors in nanowire FETs, further boosting the channel strain and achieving ~ 125% I Dsat enhancement.

Ben Lian-Huat Tan

Papers

Strained Silicon Nanowire Transistors With Germanium Source and Drain Stressors