Carbon nanotube devices offer intrinsic advantages for high-performance logic device applications. The ultrasmall body of a carbon nanotube-the tube diameter-is the key feature that should allow aggressive channel length scaling, while the intrinsic transport properties of the nanotube ensure at the same time high on-currents. In addition, the narrowness of the tube is critical to implementation of novel device concepts like the tunneling transistor. By understanding the unique capabilities of carbon nanotubes and using them in unconventional designs, novel nanoelectronic applications may become feasible. However, much better control of materials quality must be obtained, and new fabrication processes must be developed before such applications can be realized.

/pdf/carbon-nanotubes-for-high-performance-electronics-progress-1bj21dxqtf.pdf

Carbon Nanotubes for High-Performance Electronics—Progress and Prospect

Bandstructure effects in the electronic transport of strongly quantized silicon nanowire field-effect-transistors (FET) in various transport orientations are examined. A 10-band sp3d5s* semiempirical atomistic tight-binding model coupled to a self-consistent Poisson solver is used for the dispersion calculation. A semi-classical, ballistic FET model is used to evaluate the current-voltage characteristics. It is found that the total gate capacitance is degraded from the oxide capacitance value by 30% for wires in all the considered transport orientations ([100], [110], [111]). Different wire directions primarily influence the carrier velocities, which mainly determine the relative performance differences, while the total charge difference is weakly affected. The velocities depend on the effective mass and degeneracy of the dispersions. The [110] and secondly the [100] oriented 3 nm thick nanowires examined, indicate the best ON-current performance compared to [111] wires. The dispersion features are strong functions of quantization. Effects such as valley splitting can lift the degeneracies particularly for wires with cross section sides below 3 nm. The effective masses also change significantly with quantization, and change differently for different transport orientations. For the cases of [100] and [111] wires the masses increase with quantization, however, in the [110] case, the mass decreases. The mass variations can be explained from the non-parabolicities and anisotropies that reside in the first Brillouin zone of silicon.

/pdf/bandstructure-effects-in-silicon-nanowire-electron-transport-2tn939ozc3.pdf

Bandstructure Effects in Silicon Nanowire Electron Transport

Nanowire (NW) devices, particularly the gate-all-around (GAA) CMOS architecture, have emerged as the front-runner for pushing CMOS scaling beyond the roadmap. These devices offer unique advantages over their planar counterparts which make them feasible as an option for 22 -nm and beyond technology nodes. This paper reviews the current technology status for realizing the GAA NW device structures and their applications in logic circuit and nonvolatile memories. We also take a glimpse into applications of NWs in the ldquomore-than-Moorerdquo regime and briefly discuss the application of NWs as biochemical sensors. Finally, we summarize the status and outline the challenges and opportunities of the NW technology.

Si, SiGe Nanowire Devices by Top–Down Technology and Their Applications

We introduce the concept of a silicon nanotube field effect transistor whose unique core–shell gate stacks help achieve full volume inversion by giving a surge in minority carrier concentration in the near vicinity of the ultrathin channel and at the same time rapid roll-off at the source and drain junctions constituting velocity saturation-induced higher drive current-enhanced high performance per device with efficient real estate consumption. The core–shell gate stacks also provide superior short channel effects control than classical planar metal oxide semiconductor field effect transistor (MOSFET) and gate-all-around nanowire FET. The proposed device offers the true potential to be an ideal blend for quantum ballistic transport study of device property control by bottom-up approach and high-density integration compatibility using top-down state-of-the-art complementary metal oxide semiconductor flow.

Silicon nanotube field effect transistor with core-shell gate stacks for enhanced high-performance operation and area scaling benefits.

This paper considers the scaling of nanowire transistors to 10-nm gate lengths and below. The 2-D scale length theory for a cylindrical surrounding-gate MOSFET is reviewed first, yielding a general guideline between the gate length and the nanowire size for acceptable short-channel effects. Quantum confinement of electrons in the nanowire is discussed next. It gives rise to a ground-state energy and, therefore, a threshold voltage dependent on the radius of the nanowire. The scaling limit of nanowire transistors hinges on how precise the nanowire size can be controlled. The performance limit of a nanowire transistor is then assessed by applying a ballistic current model. Key issues such as the density of states of the nanowire material are discussed. Comparisons are made between the model results and the published experimental data of nanowire devices.

Scaling of Nanowire Transistors

Fully CMOS compatible silicon-nanowire (SiNW) gate-all-around (GAA) n- and p-MOS transistors are fabricated with nanowire channel in different crystal orientations and characterized at various temperatures down to 5K. SiNW width is controlled in 1 nm steps and varied from 3 to 6 nm. Devices show high drive current (2.4 mA/mum for n-FET, 1.3 mA/mum for p-FET), excellent gate control, and reduced sensitivity to temperature. Strong evidences of carrier confinement are noticed in term of Id-Vg oscillations and shift in threshold voltage with SiNW diameter. Orientation impact has been investigated as well

D. Tripathi

Papers

Ultra-Narrow Silicon Nanowire Gate-All-Around CMOS Devices: Impact of Diameter, Channel-Orientation and Low Temperature on Device Performance