The Environmental Protection Agency (EPA) provides access to information on a variety of topics related to the environment and strives to inform citizens of health risks. The EPA also has an extensive library network that consists of 26 libraries throughout the United States, which provide access to a plethora of information to EPA employees, scientists, and researchers. The EPA implemented a reorganization project to digitize their materials so they would be more accessible to a wider range of users, but this plan was drastically accelerated when the EPA was threatened with a budget cut. It chose to close and reduce the hours and services of some of their libraries. As a result, the agency was accused of denying users the “right to know” by making information unavailable, not providing an adequate strategic plan, and discarding vital materials. This case study explores the background of the digitization project, the practices implemented, and the critiques of the project.

/pdf/the-environmental-protection-agency-3gx4opzrjm.pdf

The Environmental Protection Agency

An overview of the composition and application of biomass ash. Part 1. Phase-mineral and chemical composition and classification

Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures

The burning of our diminishing fossil fuel reserves is accompanied by a large anthropogenic CO2 release, which is outpacing nature's CO2 recycling capability, causing significant environmental harm. Much is being done to avert this crisis including more efficient technology for usage, savings and replacing carbon fuels with alternatives whenever feasible. The capture of CO2 followed by sequestration (CCS) into geologic formation or under the seas has also been proposed and in some cases implemented. Carbon capture and recycling (CCR) to fuels and materials is another promising approach. At first, capturing carbon dioxide from concentrated sources such as fossil fuel burning power plants, industrial plants and natural sources might be the most practical. However, the capture of CO2 from the atmosphere is also technically feasible despite its low concentration (∼390 ppm) and presents even some benefits compared to point source CO2 capture. The present article reviews methods developed for the capture of CO2 directly from the air as well as their advantages and drawbacks. While strong bases such as sodium hydroxide and potassium hydroxide could be used, their regeneration is energy intensive, requiring high temperatures. Amines either physically or chemically immobilized on solid supports require much lower temperatures for their regeneration and are therefore promising candidates.

Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere

An overview of the composition and application of biomass ash.

Towards a comprehensive thermodynamic database for ash-forming elements in biomass and waste combustion — Current situation and future developments

Thermal treatment of solid residues from WtE units: A review

Improving urban mining practices for optimal recovery of resources from e-waste

Forest residue is the remaining fraction after the outtake of timber, which comprises the tree tops and branches. It may as fuel cause damage to the combustion device through ash slagging and fouling. The objective of this work was to model the ash composition from well-specified samples of a spruce tree: wood, bark, twigs, needles, and shoots. Their ash at 1000 °C was modelled using global chemical equilibrium calculations, and laboratory-made ash of the five samples was analyzed by XRD and SEM-EDXA. According to the results, the risk of slagging arises from the spruce foliage: molten alkali silicates from spruce needles and probably molten alkali phosphates from spruce shoots may cause problems in the furnace. Fouling caused by condensing alkali vapours can be produced by all five samples. The amount of alkali vapours in the flue gas was in the same order of magnitude for all five samples, in spite of large differences in their original alkali contents.

Daniel Lindberg

Papers

Towards a comprehensive thermodynamic database for ash-forming elements in biomass and waste combustion — Current situation and future developments

Thermal treatment of solid residues from WtE units: A review

Improving urban mining practices for optimal recovery of resources from e-waste

Ash-forming elements in four Scandinavian wood species part 3: Combustion of five spruce samples

Effect of temperature gradient on composition and morphology of synthetic chlorine-containing biomass boiler deposits