F
Fengshun Wu
Researcher at Huazhong University of Science and Technology
Publications - 108
Citations - 973
Fengshun Wu is an academic researcher from Huazhong University of Science and Technology. The author has contributed to research in topics: Soldering & Microstructure. The author has an hindex of 15, co-authored 108 publications receiving 743 citations.
Papers
More filters
Journal ArticleDOI
Microstructures and properties of new Sn-Ag-Cu lead-free solder reinforced with Ni-coated graphene nanosheets
TL;DR: In this article, the microstructures and properties of SAC305 lead-free solder reinforced with graphene nanosheets (GNS) decorated with Ni nanoparticles (Ni-GNS).
Journal ArticleDOI
Performance of Sn–3.0Ag–0.5Cu composite solder with TiC reinforcement: Physical properties, solderability and microstructural evolution under isothermal ageing
TL;DR: In this paper, the effect of nano-reinforcement that was successfully introduced into a SAC305 lead-free solder alloy with different weight fractions through a powder-metallurgy route was quantitatively analyzed.
Journal ArticleDOI
Effect of the size of carbon nanotubes (CNTs) on the microstructure and mechanical strength of CNTs-doped composite Sn0.3Ag0.7Cu-CNTs solder
TL;DR: Carbon nanotubes (CNTs) with three different diameter ranges (10-20, 40-60, and 60-100) were doped into tin-silver-copper (SAC) solder, to study the performance of the composite SAC-CNT materials.
Journal ArticleDOI
Microstructural and mechanical analysis on Cu-Sn intermetallic micro-joints under isothermal condition
TL;DR: In this paper, the authors focus on phase transformation from Cu6Sn5 into Cu3Sn and the homogenization process in full intermetallics (IMCs) micro-joints, which were prepared by soldering the initial Cu/Sn/Cu structure through high temperature storage in vacuum environment as the Transient Liquid Phase (TLP) process.
Journal ArticleDOI
Hydrogen generation from the reaction of Al-based composites activated by low-melting-point metals/oxides/salts with water
TL;DR: In this article, a high-energy ball milling-based Al-based composites was used to obtain a hydrogen yield of 1172.3% and a maximum hydrogen generation rate of 1030.5% at 25°C and atmospheric pressure.