Since the discovery of highly conducting polyacetylene by Shirakawa, MacDiarmid, and Heeger in 1977, π-conjugated systems have attracted much attention as futuristic materials for the development and production of the next generation of electronics, that is, organic electronics. Conceptually, organic electronics are quite different from conventional inorganic solid state electronics because the structural versatility of organic semiconductors allows for the incorporation of functionality by molecular design. This versatility leads to a new era in the design of electronic devices. To date, the great number of π-conjugated semiconducting materials that have either been discovered or synthesized generate an exciting library of π-conjugated systems for use in organic electronics. 11 However, some key challenges for further advancement remain: the low mobility and stability of organic semiconductors, the lack of knowledge regarding structure property relationships for understanding the fundamental chemical aspects behind the structural design, and realization of desired properties. Organic field-effect transistors (OFETs) are a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals (drain, source, and gate electrodes). OFETs are not only essential building blocks for the next generation of cheap and flexible organic circuits, but they also provide an important insight into the charge transport of πconjugated systems. Therefore, they act as strong tools for the exploration of the structure property relationships of πconjugated systems, such as parameters of field-effect mobility (μ, the drift velocity of carriers under unit electric field), current on/off ratio (the ratio of the maximum on-state current to the minimum off-state current), and threshold voltage (the minimum gate voltage that is required to turn on the transistor). 17 Since the discovery of OFETs in the 1980s, they have attracted much attention. Research onOFETs includes the discovery, design, and synthesis of π-conjugated systems for OFETs, device optimization, development of applications in radio frequency identification (RFID) tags, flexible displays, electronic papers, sensors, and so forth. It is beyond the scope of this review to cover all aspects of π-conjugated systems; hence, our focus will be on the performance analysis of π-conjugated systems in OFETs. This should make it possible to extract information regarding the fundamental merit of semiconducting π-conjugated materials and capture what is needed for newmaterials and what is the synthesis orientation of newπ-conjugated systems. In fact, for a new science with many practical applications, the field of organic electronics is progressing extremely rapidly. For example, using “organic field effect transistor” or “organic field effect transistors” as the query keywords to search the Web of Science citation database, it is possible to show the distribution of papers over recent years as shown in Figure 1A. It is very clear

Semiconducting π-conjugated systems in field-effect transistors: a material odyssey of organic electronics.

Functionalized acenes and heteroacenes for organic electronics.

Electron and ambipolar transport in organic field-effect transistors.

It is now widely accepted that skin sensitivity will be very important for future robots used by humans in daily life for housekeeping and entertainment purposes Despite this fact, relatively little progress has been made in the field of pressure recognition compared to the areas of sight and voice recognition, mainly because good artificial “electronic skin” with a large area and mechanical flexibility is not yet available The fabrication of a sensitive skin consisting of thousands of pressure sensors would require a flexible switching matrix that cannot be realized with present silicon-based electronics Organic field-effect transistors can substitute for such conventional electronics because organic circuits are inherently flexible and potentially ultralow in cost even for a large area Thus, integration of organic transistors and rubber pressure sensors, both of which can be produced by low-cost processing technology such as large-area printing technology, will provide an ideal solution to realize a practical artificial skin, whose feasibility has been demonstrated in this paper Pressure images have been taken by flexible active matrix drivers with organic transistors whose mobility reaches as high as 14 cm2/V·s The device is electrically functional even when it is wrapped around a cylindrical bar with a 2-mm radius

/pdf/a-large-area-flexible-pressure-sensor-matrix-with-organic-233vkpdvcr.pdf

A large-area, flexible pressure sensor matrix with organic field-effect transistors for artificial skin applications

Acenes have long been the subject of intense study because of the unique electronic properties associated with their pi-bond topology. Recent reports of impressive semiconductor properties of larger homologues have reinvigorated research in this field, leading to new methods for their synthesis, functionalization, and purification, as well as for fabricating organic electronic components. Studies performed on high-purity acene single crystals revealed their intrinsic electronic properties and provide useful benchmarks for thin film device research. New approaches to add functionality were developed to improve the processability of these materials in solution. These new functionalization strategies have recently allowed the synthesis of acenes larger than pentacene, which have hitherto been largely unavailable and poorly studied, as well as investigation of their associated structure/property relationships.

The larger acenes: versatile organic semiconductors.

Organic thin film transistors (TFTs) are of interest for a variety of large-area electronic applications, such as displays, sensors and electronic barcodes. One of the key problems with existing organic TFTs is their large operating voltage, which often exceeds 20 V. This is due to poor capacitive coupling through relatively thick gate dielectric layers: these dielectrics are usually either inorganic oxides or nitrides, or insulating polymers, and are often thicker than 100 nm to minimize gate leakage currents. Here we demonstrate a manufacturing process for TFTs with a 2.5-nm-thick molecular self-assembled monolayer (SAM) gate dielectric and a high-mobility organic semiconductor (pentacene). These TFTs operate with supply voltages of less than 2 V, yet have gate currents that are lower than those of advanced silicon field-effect transistors with SiO2 dielectrics. These results should therefore increase the prospects of using organic TFTs in low-power applications (such as portable devices). Moreover, molecular SAMs may even be of interest for advanced silicon transistors where the continued reduction in dielectric thickness leads to ever greater gate leakage and power dissipation.

Low-voltage organic transistors with an amorphous molecular gate dielectric

Relationship Between Molecular Structure and Electrical Performance of Oligothiophene Organic Thin Film Transistors

We have fabricated organic thin-film transistors (TFT's) using the small-molecule polycyclic aromatic hydrocarbon pentacene as the active material. Devices were fabricated on glass substrates using low-temperature ion-beam deposited silicon dioxide as the gate dielectric, ion-beam deposited palladium for the source and drain contacts, and vacuum-evaporated pentacene to form the active layer. Excellent electrical characteristics were obtained, including carrier mobility as large as 0.6 cm/sup 2//V-s, on/off current ratio as large as 10/sup 8/, and subthreshold slope as low as 0.7 V/dec, all record values for organic transistors fabricated on nonsingle-crystal substrates.

Pentacene organic thin-film transistors for circuit and display applications

We have fabricated and characterized analog and digital circuits using organic thin-film transistors on polyester film substrates. These are the first reported dynamic results for organic circuits fabricated on polyester substrates. The high-performance pentacene transistors yield circuits with the highest reported clock frequencies for organic circuits.

Analog and digital circuits using organic thin-film transistors on polyester substrates

We have fabricated organic thin-film transistors and integrated circuits using pentacene as the active material. Devices were fabricated on glass substrates using low-temperature ion-beam sputtered silicon dioxide as the gate dielectric and a double-layer photoresist process to isolate devices. These transistors have carrier mobility near 0.5 cm/sup 2//V-s and on/off current ratio larger than 10/sup 7/. Using a level-shifting design that allows circuits to operate over a wide range of threshold voltages, we have fabricated ring oscillators with propagation delay below 75 /spl mu/s per stage, limited by the level-shifting circuitry. When driven directly, inverters without level shifting show submicrosecond rise and fall time constants.

Hagen Klauk

Papers

Low-voltage organic transistors with an amorphous molecular gate dielectric

Relationship Between Molecular Structure and Electrical Performance of Oligothiophene Organic Thin Film Transistors

Pentacene organic thin-film transistors for circuit and display applications

Analog and digital circuits using organic thin-film transistors on polyester substrates

Fast organic thin-film transistor circuits