Under the Connected Vehicles (CV) environment, it is possible to create a Cooperative Vehicle Intersection Control (CVIC) system that enables cooperation between vehicles and infrastructure for effective intersection operations and management when all vehicles are fully automated. Assuming such a CVIC environment, this paper proposed a CVIC algorithm that does not require a traffic signal. The CVIC algorithm was designed to manipulate individual vehicles' maneuvers so that vehicles can safely cross the intersection without colliding with other vehicles. By eliminating the potential overlaps of vehicular trajectories coming from all conflicting approaches at the intersection, the CVIC algorithm seeks a safe maneuver for every vehicle approaching the intersection and manipulates each of them. An additional algorithm was designed to deal with the system failure cases resulting from inevitable trajectory overlaps at the intersection and infeasible solutions. A simulation-based case study implemented on a hypothetical four-way single-lane approach intersection under varying congestion conditions showed that the CVIC algorithm significantly improved intersection performance compared with conventional actuated intersection control: 99% and 33% of stop delay and total travel time reductions, respectively, were achieved. In addition, the CVIC algorithm significantly improved air quality and energy savings: 44% reductions of CO2 and 44% savings of fuel consumption.

Development and Evaluation of a Cooperative Vehicle Intersection Control Algorithm Under the Connected Vehicles Environment

Connected and automated vehicles (CAVs) have the potential to improve safety by reducing and mitigating traffic accidents. They can also provide opportunities to reduce transportation energy consumption and emissions by improving traffic flow. Vehicle communication with traffic structures and traffic lights can allow individual vehicles to optimize their operation and account for unpredictable changes. This paper summarizes the developments and the research trends in coordination with the CAVs that have been reported in the literature to date. Remaining challenges and potential future research directions are also discussed.

A Survey on the Coordination of Connected and Automated Vehicles at Intersections and Merging at Highway On-Ramps

Currently autonomous or self-driving vehicles are at the heart of academia and industry research because of its multi-faceted advantages that includes improved safety, reduced congestion, lower emissions and greater mobility. Software is the key driving factor underpinning autonomy within which planning algorithms that are responsible for mission-critical decision making hold a significant position. While transporting passengers or goods from a given origin to a given destination, motion planning methods incorporate searching for a path to follow, avoiding obstacles and generating the best trajectory that ensures safety, comfort and efficiency. A range of different planning approaches have been proposed in the literature. The purpose of this paper is to review existing approaches and then compare and contrast different methods employed for the motion planning of autonomous on-road driving that consists of (1) finding a path, (2) searching for the safest manoeuvre and (3) determining the most feasible trajectory. Methods developed by researchers in each of these three levels exhibit varying levels of complexity and performance accuracy. This paper presents a critical evaluation of each of these methods, in terms of their advantages/disadvantages, inherent limitations, feasibility, optimality, handling of obstacles and testing operational environments. Based on a critical review of existing methods, research challenges to address current limitations are identified and future research directions are suggested so as to enhance the performance of planning algorithms at all three levels. Some promising areas of future focus have been identified as the use of vehicular communications (V2V and V2I) and the incorporation of transport engineering aspects in order to improve the look-ahead horizon of current sensing technologies that are essential for planning with the aim of reducing the total cost of driverless vehicles. This critical review on planning techniques presented in this paper, along with the associated discussions on their constraints and limitations, seek to assist researchers in accelerating development in the emerging field of autonomous vehicle research.

Real-time motion planning methods for autonomous on-road driving: State-of-the-art and future research directions

Computer Aided Civil and Infrastructure Engineering

Intersection management is one of the most challenging problems within the transport system. Traffic light-based methods have been efficient but are not able to deal with the growing mobility and social challenges. On the other hand, the advancements of automation and communications have enabled cooperative intersection management, where road users, infrastructure, and traffic control centers are able to communicate and coordinate the traffic safely and efficiently. Major techniques and solutions for cooperative intersections are surveyed in this paper for both signalized and nonsignalized intersections, whereas focuses are put on the latter. Cooperative methods, including time slots and space reservation, trajectory planning, and virtual traffic lights, are discussed in detail. Vehicle collision warning and avoidance methods are discussed to deal with uncertainties. Concerning vulnerable road users, pedestrian collision avoidance methods are discussed. In addition, an introduction to major projects related to cooperative intersection management is presented. A further discussion of the presented works is given with highlights of future research topics. This paper serves as a comprehensive survey of the field, aiming at stimulating new methods and accelerating the advancement of automated and cooperative intersections.

Cooperative Intersection Management: A Survey

A system including Global Positioning Systems (GPS) and digital cartography is a good solution to carry out vehicle's guidance. However, it has inconveniences like high sensibility to multipath and interference when the GPS signal is blocked by external agents. Another system is mandatory to avoid this error. This paper presents a cooperative system based on GPS and Inertial Navigation Systems (INS) for automated vehicle position. The control system includes a decision unit to choose which value is the correct. In case GPS is working at top precision, it takes the control. On the other part, GPS signal can be lost and inertial control system guides the car in this occasion. A third possibility is contemplated: we receive the signal from GPS but the accuracy is over one meter. Now, position value is obtained by means of both systems. Experimental results analyze two situations: guidance in an urban area where GPS signal can be occluded by buildings or trees during short time intervals and the possibility of loss of the signal in long time to simulate the circulation in tunnels. Good results have been observed in tests and it demonstrates how a cooperative system improves the automated vehicle guidance.

Autonomous vehicle based in cooperative gps and inertial systems

Synthesis of 3-substituted-4-phenyl-2-thioxo-1,2,3,4,5,6,7,8-octahydrobenzo[4,5]thieno[2,3-á]pyrimidines †

It is known that the techniques under the topic of Soft Computing have a strong capability of learning and cognition, as well as a good tolerance to uncertainty and imprecision. Due to these properties they can be applied successfully to Intelligent Vehicle Systems; ITS is a broad range of technologies and techniques that hold answers to many transportation problems. The unmanned control of the steering wheel of a vehicle is one of the most important challenges facing researchers in this area. This paper presents a method to adjust automatically a fuzzy controller to manage the steering wheel of a mass-produced vehicle; to reach it, information about the car state while a human driver is handling the car is taken and used to adjust, via iterative genetic algorithms an appropriated fuzzy controller. To evaluate the obtained controllers, it will be considered the performance obtained in the track following task, as well as the smoothness of the driving carried out.

/pdf/automatic-lateral-control-for-unmanned-vehicles-via-genetic-58aboe9tjb.pdf

Automatic lateral control for unmanned vehicles via genetic algorithms

This article presents a cooperative manoeuvre among three dual mode cars - vehicles equipped with sensors and actuators, and that can be driven either manually or autonomously. One vehicle is driven autonomously and the other two are driven manually. The main objective is to test two decision algorithms for priority conflict resolution at intersections so that a vehicle autonomously driven can take their own decision about crossing an intersection mingling with manually driven cars without the need for infrastructure modifications. To do this, the system needs the position, speeds, and turning intentions of the rest of the cars involved in the manoeuvre. This information is acquired via communications, but other methods are also viable, such as artificial vision. The idea of the experiments was to adjust the speed of the manually driven vehicles to force a situation where all three vehicles arrive at an intersection at the same time.

/pdf/autonomous-vehicle-control-systems-for-safe-crossroads-5bwm27z89i.pdf

Autonomous vehicle control systems for safe crossroads

This paper describes the results of vehicle-to-vehicle (V2V) and infrastructure-to-vehicle (I2V) experiments implementing cooperative maneuvering for three different vehicles driving automatically. The cars used were cybercars from the Institut National de Recherche en Informatique et Automatique (INRIA), (France), which are fully automated road vehicles, and two mass-produced cars-one a Smart Fortwo car from TNO (Netherlands) equipped with additional actuators and sensors and the other a convertible Citroen C3 from IAI (Spain) that uses sensorial information to manage the actuators. The cars communicate by a wireless mesh network over Wi-Fi using the optimized link state routing (OLSR) ad-hoc protocol. The entire communication task is embedded in a small MIPS Linux Box (4G System Cube) that is transparent for the cars. A standard framework was defined with the parameters needed to perform adaptive cruise control (ACC) and intersection maneuvers among the cars, as well as emergency stops via a signal sent by the infrastructure. The experiments were carried out in La Rochelle (France) during the final demonstration of the European Union (EU) Cybercars-2 Project.

/pdf/cooperative-maneuvering-in-close-environments-among-olxxa9641u.pdf

Javier Alonso

Papers

Autonomous vehicle based in cooperative gps and inertial systems

Synthesis of 3-substituted-4-phenyl-2-thioxo-1,2,3,4,5,6,7,8-octahydrobenzo[4,5]thieno[2,3-á]pyrimidines †

Automatic lateral control for unmanned vehicles via genetic algorithms

Autonomous vehicle control systems for safe crossroads

Cooperative Maneuvering in Close Environments Among Cybercars and Dual-Mode Cars