In combination with a wheel for a bicycle and the like having an annular rim, a hub rotatable about its axis, and axially offset groups of circumferentially spaced spokes which centrally support the hub on the rim; a wheel decorating ornament comprising an annular, planar sheet of material decorated on opposite sides, axially disposed between the groups of spokes and radially disposed between the rim and the hub.

The Test Access Port and Boundary Scan Architecture

IEEE transactions on computer-aided design of integrated circuits and systems : a publication of the IEEE Circuits and Systems Society

VLSI Test Principles and Architectures: Design for Testability (Systems on Silicon)

High-performance parallel computer architecture and systems have been improved at a phenomenal rate. In the meantime, VLSI computer-aided design (CAD) software for multibillion-transistor IC design has become increasingly complex and requires prohibitively high computational resources. Recent studies have shown that, numerous CAD problems, with their high computational complexity, can greatly benefit from the fast-increasing parallel computation capabilities. However, parallel programming imposes big challenges for CAD applications. Fully exploiting the computational power of emerging general-purpose and domain-specific multicore/many-core processor systems, calls for fundamental research and engineering practice across every stage of parallel CAD design, from algorithm exploration, programming models, design-time and run-time environment, to CAD applications, such as verification, optimization, and simulation. This journal special section will cover recent progress on parallel CAD research, including algorithm foundations, programming models, parallel architectural-specific optimization, and verification. More specifically, papers with in-depth and extensive coverage of the following topics will be considered, as well as other topics relevant to the design of parallel CAD algorithms and software tools. 1. Parallel algorithm design and specification for CAD applications 2. Parallel programming models and languages of particular use in CAD 3. Runtime support and performance optimization for CAD applications 4. Parallel architecture-specific design and optimization for CAD applications 5. Parallel program debugging and verification techniques particularly relevant for CAD The papers should be submitted via the Manuscript Central website and should adhere to standard ACM TODAES formatting requirements (http://todaes.acm.org/). The page count limit is 25.

Parallel CAD: Algorithm Design and Programming Special Section Call for Papers TODAES: ACM Transactions on Design Automation of Electronic Systems

We propose a new scheme for built-in test (BIT) that uses multiple-polynomial linear feedback shift registers (MP-LFSR's). The same MP-LFSR that generates random patterns to cover easy to test faults is loaded with seeds to generate deterministic vectors for difficult to test faults. The seeds are obtained by solving systems of linear equations involving the seed variables for the positions where the test cubes have specified values. We demonstrate that MP-LFSR's produce sequences with significantly reduced probability of linear dependence compared to single polynomial LFSR's. We present a general method to determine the probability of encoding as a function of the number of specified bits in the test cube, the length of the LFSR and the number of polynomials. Theoretical analysis and experiments show that the probability of encoding a test cube with s specified bits in an s-stage LFSR with 16 polynomials is 1-10/sup -6/. We then present the new BIT scheme that allows for an efficient encoding of the entire test set. Here the seeds are grouped according to the polynomial they use and an implicit polynomial identification reduces the number of extra bits per seed to one bit. The paper also shows methods of processing the entire test set consisting of test cubes with varied number of specified bits. Experimental results show the tradeoffs between test data storage and test application time while maintaining complete fault coverage. >

Built-in test for circuits with scan based on reseeding of multiple-polynomial linear feedback shift registers

This book is a comprehensive guide to new DFT methods that will show the readers how to design a testable and quality product, drive down test cost, improve product quality and yield, and speed up time-to-market and time-to-volume.

· Most up-to-date coverage of design for testability. 
· Coverage of industry practices commonly found in commercial DFT tools but not discussed in other books. 
· Numerous, practical examples in each chapter illustrating basic VLSI test principles and DFT architectures.
· Lecture slides and exercise solutions for all chapters are now available.
· Instructors are also eligible for downloading PPT slide files and MSWORD solutions files from the manual website.

Table of Contents

Chapter 1 - Introduction
Chapter 2 - Design for Testability
Chapter 3 - Logic and Fault Simulation 
Chapter 4 - Test Generation 
Chapter 5 - Logic Built-In Self-Test
Chapter 6 - Test Compression
Chapter 7 - Logic Diagnosis
Chapter 8 - Memory Testing and Built-In Self-Test
Chapter 9 - Memory Diagnosis and Built-In Self-Repair
Chapter 10 - Boundary Scan and Core-Based Testing
Chapter 11 - Analog and Mixed-Signal Testing
Chapter 12 - Test Technology Trends in the Nanometer Age

VLSI Test Principles and Architectures: Design for Testability

Research on low-power scan testing has been focused on the shift mode, with little or no consideration given to the capture mode power. However, high switching activity when capturing a test response can cause excessive IR drop, resulting in significant yield loss. This paper addresses this problem with a novel low-capture-power X-filling method by assigning 0's and 1's to unspecified (X) bits in a test cube to reduce the switching activity in capture mode. This method can be easily incorporated into any test generation flow, where test cubes are obtained during ATPG or by X-bit identification. Experimental results show the effectiveness of this method in reducing capture power dissipation without any impact on area, timing, and fault coverage.

/pdf/on-low-capture-power-test-generation-for-scan-testing-wm7ivy9gwr.pdf

On low-capture-power test generation for scan testing

VLSI Test Principles and Architectures

Scan-based at-speed testing is a key technology to guarantee timing-related test quality in the deep submicron era. However, its applicability is being severely challenged since significant yield loss may occur from circuit malfunction due to excessive IR drop caused by high power dissipation when a test response is captured. This paper addresses this critical problem with a novel low-capture-power X-filling method of assigning 0's and 1's to unspecified (X) bits in a test cube obtained during ATPG. This method reduces the circuit switching activity in capture mode and can be easily incorporated into any test generation flow to achieve capture power reduction without any area, timing, or fault coverage impact. Test vectors generated with this practical method greatly improve the applicability of scan-based at-speed testing by reducing the risk of test yield loss

Low-capture-power test generation for scan-based at-speed testing

A method and system to automate scan synthesis at register-transfer level (RTL). The method and system will produce scan HDL code modeled at RTL for an integrated circuit modeled at RTL. The method and system comprise computer-implemented steps of performing RTL testability analysis, clock-domain minimization, scan selection, test point selection, scan repair and test point insertion, scan replacement and scan stitching, scan extraction, interactive scan debug, interactive scan repair, and flush/random test bench generation. In addition, the present invention further comprises a method and system for hierarchical scan synthesis by performing scan synthesis module-by-module and then stitching these scanned modules together at top-level. The present invention further comprises integrating and verifying the scan HDL code with other design-for-test (DFT) HDL code, including boundary-scan and logic BIST (built-in self-test).

Laung-Terng Wang

Papers

VLSI Test Principles and Architectures: Design for Testability

On low-capture-power test generation for scan testing

VLSI Test Principles and Architectures

Low-capture-power test generation for scan-based at-speed testing

Computer-aided design system to automate scan synthesis at register-transfer level