Use of amphiphilic triblock copolymers to direct the organization of polymerizing silica species has resulted in the preparation of well-ordered hexagonal mesoporous silica structures (SBA-15) with uniform pore sizes up to approximately 300 angstroms. The SBA-15 materials are synthesized in acidic media to produce highly ordered, two-dimensional hexagonal (space group p6mm) silica-block copolymer mesophases. Calcination at 500°C gives porous structures with unusually large interlattice d spacings of 74.5 to 320 angstroms between the (100) planes, pore sizes from 46 to 300 angstroms, pore volume fractions up to 0.85, and silica wall thicknesses of 31 to 64 angstroms. SBA-15 can be readily prepared over a wide range of uniform pore sizes and pore wall thicknesses at low temperature (35° to 80°C), using a variety of poly(alkylene oxide) triblock copolymers and by the addition of cosolvent organic molecules. The block copolymer species can be recovered for reuse by solvent extraction with ethanol or removed by heating at 140°C for 3 hours, in both cases, yielding a product that is thermally stable in boiling water.

Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores

One of the most pervasive problems afflicting people throughout the world is inadequate access to clean water and sanitation. Problems with water are expected to grow worse in the coming decades, with water scarcity occurring globally, even in regions currently considered water-rich. Addressing these problems calls out for a tremendous amount of research to be conducted to identify robust new methods of purifying water at lower cost and with less energy, while at the same time minimizing the use of chemicals and impact on the environment. Here we highlight some of the science and technology being developed to improve the disinfection and decontamination of water, as well as efforts to increase water supplies through the safe re-use of wastewater and efficient desalination of sea and brackish water.

Science and technology for water purification in the coming decades

A family of highly ordered mesoporous (20−300 A) silica structures have been synthesized by the use of commercially available nonionic alkyl poly(ethylene oxide) (PEO) oligomeric surfactants and poly(alkylene oxide) block copolymers in acid media. Periodic arrangements of mescoscopically ordered pores with cubic Im3m, cubic Pm3m (or others), 3-d hexagonal (P63/mmc), 2-d hexagonal (p6mm), and lamellar (Lα) symmetries have been prepared. Under acidic conditions at room temperature, the nonionic oligomeric surfactants frequently form cubic or 3-d hexagonal mesoporous silica structures, while the nonionic triblock copolymers tend to form hexagonal (p6mm) mesoporous silica structures. A cubic mesoporous silica structure (SBA-11) with Pm3m diffraction symmetry has been synthesized in the presence of C16H33(OCH2CH2)10OH (C16EO10) surfactant species, while a 3-d hexagonal (P63/mmc) mesoporous silica structure (SBA-12) results when C18EO10 is used. Surfactants with short EO segments tend to form lamellar mesost...

Nonionic Triblock and Star Diblock Copolymer and Oligomeric Surfactant Syntheses of Highly Ordered, Hydrothermally Stable, Mesoporous Silica Structures

https://www.researchgate.net/file.PostFileLoader.html?id=526892a1d4c118a61d4360bd&assetKey=AS%3A272155479085058%401441898330516

Porosity of 3D biomaterial scaffolds and osteogenesis.

3.2.3. Hydroformylation 2467 3.2.4. Dimerization 2468 3.2.5. Oxidative Cleavage and Ozonolysis 2469 3.2.6. Metathesis 2470 4. Terpenes 2472 4.1. Pinene 2472 4.1.1. Isomerization: R-Pinene 2472 4.1.2. Epoxidation of R-Pinene 2475 4.1.3. Isomerization of R-Pinene Oxide 2477 4.1.4. Hydration of R-Pinene: R-Terpineol 2478 4.1.5. Dehydroisomerization 2479 4.2. Limonene 2480 4.2.1. Isomerization 2480 4.2.2. Epoxidation: Limonene Oxide 2480 4.2.3. Isomerization of Limonene Oxide 2481 4.2.4. Dehydroisomerization of Limonene and Terpenes To Produce Cymene 2481

Chemical Routes for the Transformation of Biomass into Chemicals

Block polymers are formed by the covalent union of two or more chemically distinct homopolymers These composite macromolecules self-assemble into a variety of ordered morphologies with features on the nanometer length scale, a phenomenon that has interested researchers for roughly four decades The known ordered morphologies include numerous multiply continuous network mesostructures, the focus of this review Multiply continuous network morphologies contain two or more chemically distinct domains that continuously percolate through the specimen in all three dimensions They have captivated researchers because of their superior mechanical properties and could potentially find utility in technologies such as catalysis, photonic materials, solar cells, and separations This review summarizes experimental and theoretical investigations of the structures and properties of network morphologies in AB block copolymer and ABC block terpolymer systems and includes a discussion of some proposed technological appli

Ordered Network Mesostructures in Block Polymer Materials

The simultaneous, segregated storage of two different chromophores in a multicompartment micelle, which is formed from self-assembly of (polyethylethylene)(polyethylene oxide)(polyperfluoropropylene oxide) mikto-arm star terpolymers in water, was investigated by spectrophotometry. The multicompartment micelles, with segregated micellar cores composed of fluorocarbon and hydrocarbon compartments, can simultaneously absorb two chemically different molecules. These two molecules were confined into their preferred compartments with high selectivity.

Simultaneous, segregated storage of two agents in a multicompartment micelle.

Materials with percolating mesopores are attractive for applications such as catalysis, nanotemplating, and separations. Polymeric frameworks are particularly appealing because the chemical composition and the surface chemistry are readily tunable. We report on the preparation of robust nanoporous polymers with percolating pores in the 4- to 8-nanometer range from a microphase-separated bicontinuous precursor. We combined polymerization-induced phase separation with in situ block polymer formation from a mixture of multifunctional monomers and a chemically etchable polymer containing a terminal chain transfer agent. This marriage results in microphase separation of the mixture into continuous domains of the etchable polymer and the emergent cross-linked polymer. Precise control over pore size distribution and mechanical integrity renders these materials particularly suited for various advanced applications.

https://science.sciencemag.org/content/sci/336/6087/1422.full.pdf

Reticulated Nanoporous Polymers by Controlled Polymerization-Induced Microphase Separation

Polymers protect us from the elements, increase the fuel efficiency of cars, protect food from pathogens, help cure disease, and enable renewable-energy technologies. To promote, foster, and enable a sustainable society, we need polymers. Yet polymers can also create serious environmental challenges. Nearly all plastic packaging produced—more than 80 billion kg annually—originates from fossil resources and is disposed of after a relatively short period of use ( 1 , 2 ). An increasing fraction of plastic is recycled or incinerated to recover energy, but most ends up in landfills, littering cities or landscapes, and in the oceans ( 3 ). New recycling concepts ( 4 ), clean incineration, and the development of polymers that can rapidly degrade ( 5 ) will be key to addressing these problems. Shifting from petrochemical feedstocks to renewable resources—making plastics from plants—can also rectify some environmental challenges associated with petrochemical extraction and render plastics production sustainable (see the figure).

https://science.sciencemag.org/content/sci/358/6365/868.full.pdf

Marc A. Hillmyer

Papers

Ordered Network Mesostructures in Block Polymer Materials

Simultaneous, segregated storage of two agents in a multicompartment micelle.

Reticulated Nanoporous Polymers by Controlled Polymerization-Induced Microphase Separation

The promise of plastics from plants

Processing and properties of porous poly(L-lactide)/bioactive glass composites.