Showing papers by "R. A. Snavely published in 2006"

High-energy Kα radiography using high-intensity, short-pulse lasersa)

Abstract: The characteristics of 22–40keV Kα x-ray sources are measured. These high-energy sources are produced by 100TW and petawatt high-intensity lasers and will be used to develop and implement workable radiography solutions to probe high-Z and dense materials for the high-energy density experiments. The measurements show that the Kα source size from a simple foil target is larger than 60μm, too large for most radiography applications. The total Kα yield is independent of target thicknesses, verifying that refluxing plays a major role in photon generation. Smaller radiating volumes emit brighter Kα radiation. One-dimensional radiography experiments using small-edge-on foils resolved 10μm features with high contrast. Experiments were performed to test a variety of small volume two-dimensional point sources such as cones, wires, and embedded wires, measured photon yields, and compared the measurements with predictions from hybrid-particle-in-cell simulations. In addition to high-energy, high-resolution backlighte...

Proton radiography of a laser-driven implosion

Abstract: Protons accelerated by a picosecond laser pulse have been used to radiograph a 500 microm diameter capsule, imploded with 300 J of laser light in 6 symmetrically incident beams of wavelength 1.054 microm and pulse length 1 ns. Point projection proton backlighting was used to characterize the density gradients at discrete times through the implosion. Asymmetries were diagnosed both during the early and stagnation stages of the implosion. Comparison with analytic scattering theory and simple Monte Carlo simulations were consistent with a 3+/-1 g/cm3 core with diameter 85+/-10 microm. Scaling simulations show that protons>50 MeV are required to diagnose asymmetry in ignition scale conditions.

Hot surface ionic line emission and cold K-inner shell emission from petawatt-laser-irradiated Cu foil targets

Abstract: A hot, T{sub e} {approx} 2- to 3-keV surface plasma was observed in the interaction of a 0.7-ps petawatt laser beam with solid copper-foil targets at intensities >10{sup 20} W/cm{sup 2}. Copper K-shell spectra were measured in the range of 8 to 9 keV using a single-photon-counting x-ray CCD camera. In addition to K{sub {alpha}} and K{sub {beta}} inner-shell lines, the emission contained the Cu He{sub {alpha}} and Ly{sub {alpha}} lines, allowing the temperature to be inferred. These lines have not been observed previously with ultrafast laser pulses. For intensities less than 3 x 10{sup 18} W/cm{sup 2}, only the K{sub {alpha}} and K{sub {beta}} inner-shell emissions are detected. Measurements of the absolute K{sub {alpha}} yield as a function of the laser intensity are in agreement with a model that includes refluxing and confinement of the suprathermal electrons in the target volume.

Fast-electron transport and heating of solid targets in high-intensity laser interactions measured by K alpha fluorescence.

Abstract: We present experimental results on fast-electron energy deposition into solid targets in ultrahigh intensity laser-matter interaction. X-ray K alpha emission spectroscopy with absolute photon counting served to diagnose fast-electron propagation in multilayered targets. Target heating was measured from ionization-shifted K alpha emission. Data show a 200 microm fast-electron range in solid Al. The relative intensities of spectrally shifted Al K alpha lines imply a mean temperature of a few tens of eV up to a 100 microm depth. Experimental results suggest refluxing of the electron beam at target rear side. They were compared with the predictions of both a collisional Monte Carlo and a collisional-electromagnetic, particle-fluid transport code. The validity of the code modeling of heating in such highly transient conditions is discussed.

Application of imaging plates to x-ray imaging and spectroscopy in laser plasma experiments (invited)

Abstract: We report recent progress of x-ray diagnostic techniques in laser plasma experiment with using imaging plates. Imaging plate is a photo-stimulable phosphor screen (BaF(Br0.85,10.15):Eu{sup 2+}) deposited on flexible metal or plastic substrate. We applied the imaging plate to x-ray microscopy in laser fusion experiment experiments. Self-emission x-ray images of imploded core were obtained successfully with using imaging plate and high magnification target mounted pinhole arrays. The imaging plates were applied also in ultra-intense laser experiment at the Rutherford Appleton Laboratory. Small samarium foil was irradiated by high intensity laser pulse from the Vulcan laser system. The k shell x-rays from the foil ({approx}40keV) was used as a line x-ray source for microscopic radiography. Performance of imaging plate on high-energy x-ray backlit radiography was demonstrated by imaging sinusoidal grooves of 6um amplitude on a Au foil. Detailed spectrum of k shell x-ray from Cu embedded foil target was successfully observed by fully coupling imaging plate with a highly ordered pyrolytic graphite crystal spectrometer. The performances of the imaging plates evaluated in actual laser plasma experiments will be presented.

Measurements of electron and proton heating temperatures from extreme-ultraviolet light images at 68 eV in petawatt laser experiments

Abstract: A 68 eV extreme-ultraviolet light imaging diagnostic measures short pulse isochoric heating by electrons and protons in petawatt laser experiments. Temperatures are deduced from the absolute intensities and comparison with modeling using a radiation hydrodynamics code.

Study of electron and proton isochoric heating for fast ignition

Abstract: Isochoric heating by electrons has been measured in the two limiting cases of small area thin foils with dominant refluxing and cone-long-wire geometry with negligible refluxing in the wire. Imaging of Cu K alpha fluorescence, crystal x-ray spectroscopy of Cu K shell emission, and XUV imaging at 68eV and 256eV are discussed. Laser power on target was typically 0.5 PW in 0.7ps. Heating by focused proton beams generated at the concave inside surface of a hemi-shell and from a sub hemi-shell inside a 30 degrees cone has been studied with the same diagnostic methods plus imaging of proton induced K alpha. Conversion efficiency to protons has been measured and modeled. Conclusions from the experiments, links to theoretical understanding and relevance to fast ignition are outlined.

Overview of recent progress in US fast ignition research

Abstract: The Fast Ignition Program in the United States has enjoyed increased funding in various forms from the Office of Fusion Energy Sciences of the Department of Energy. The program encompasses experiments on large laser facilities at various world-wide locations, and benefits enormously from collaborations with many international scientists. The program includes exploratory work in cone-target design and implosion dynamics, high electron current transport measurements in normal density materials, development of diagnostics for heating measurements, generation of protons from shaped targets, theoretical work on high gain target designs, and extensive modeling development using PIC and hybrid codes.

Relativistic laser channeling into high-density plasmas

Abstract: We experimentally studied relativistic laser propagation in preplasmas at the highest powers ever attempted-0.2 to 0.4petawatt. We demonstrated a single conical-shaped plasma channel formation extending several hundred microns in length from the under dense to over dense plasmas, indicating whole-beam self-focused laser channeling into the high-density plasma. The channel cone was reproduced by a three dimensional particle-in-cell simulation. The confirmation of the relativistic laser channeling into high-density plasmas holds the promise of fast igniting a highly compressed fuel plasma core.