Showing papers by "Sabina Passamonti published in 2021"

Safety assessment of titanium dioxide (E171) as a food additive

Abstract: The present opinion deals with an updated safety assessment of the food additive titanium dioxide (E 171) based on new relevant scientific evidence considered by the Panel to be reliable, including data obtained with TiO2 nanoparticles (NPs) and data from an extended one-generation reproductive toxicity (EOGRT) study. Less than 50% of constituent particles by number in E 171 have a minimum external dimension 30 nm) up to the highest dose tested of 100 mg/kg bw per day. No effects on reproductive and developmental toxicity were observed up to a dose of 1,000 mg E 171/kg bw per day, the highest dose tested in the EOGRT study. However, observations of potential immunotoxicity and inflammation with E 171 and potential neurotoxicity with TiO2 NPs, together with the potential induction of aberrant crypt foci with E 171, may indicate adverse effects. With respect to genotoxicity, the Panel concluded that TiO2 particles have the potential to induce DNA strand breaks and chromosomal damage, but not gene mutations. No clear correlation was observed between the physico-chemical properties of TiO2 particles and the outcome of either in vitro or in vivo genotoxicity assays. A concern for genotoxicity of TiO2 particles that may be present in E 171 could therefore not be ruled out. Several modes of action for the genotoxicity may operate in parallel and the relative contributions of different molecular mechanisms elicited by TiO2 particles are not known. There was uncertainty as to whether a threshold mode of action could be assumed. In addition, a cut-off value for TiO2 particle size with respect to genotoxicity could not be identified. No appropriately designed study was available to investigate the potential carcinogenic effects of TiO2 NPs. Based on all the evidence available, a concern for genotoxicity could not be ruled out, and given the many uncertainties, the Panel concluded that E 171 can no longer be considered as safe when used as a food additive.

Re-evaluation of polydextrose (E 1200) as a food additive

Abstract: This opinion deals with the re-evaluation of polydextrose (E 1200) when used as a food additive. The Panel followed the conceptual framework for the risk assessment of certain additives and considered that: adequate exposure estimates were available; the margin of safety (MOS)/margin of exposure (MOE) for arsenic was between 0.5-14 and 8.5 for lead; the exhaustions of the tolerable weekly intake (TWI) for cadmium would be 165%, 10% for mercury, whereas the exhaustion of the tolerable daily intake (TDI) for nickel would be 9%; the absorption is limited and part of polydextrose is fermented in the large intestine into short-chain fatty acids (SCFA); adequate toxicity data were available; there is no concern with respect to genotoxicity; no adverse effects were reported in subchronic studies in rats, dogs or monkeys nor in chronic or carcinogenicity studies in mice and rats at the highest doses tested of up 12,500 mg/kg body weight (bw) per day and 15,000 mg/kg bw per day, respectively; the nephrocalcinosis in dogs given high doses of polydextrose was considered to be a treatment-related but a secondary effect related to diarrhoea, and hence not relevant for the risk assessment; no adverse effects were reported in reproductive or developmental toxicity studies in rats administered up to 10,000 mg polydextrose/kg bw per day, or in a developmental toxicity study in rabbits up to 1,818 mg/kg bw per day (the highest dose tested). Therefore, the Panel concluded that there is no need for numerical acceptable daily intake (ADI) for polydextrose (E 1200), and that there is no safety concern for the reported uses and use levels of polydextrose as a food additive. The Panel recommended that European Commission considers to lower the maximum limit for lead and to introduce limits for arsenic, cadmium and mercury in the EU specifications for polydextrose (E 1200), and to verify that polydextrose-N as a food additive (E 1200) is no longer marketed in the EU.

Scientific Guidance for the preparation of applications on smoke flavouring primary products.

Abstract: Following a request from the European Commission, EFSA developed updated scientific guidance to assist applicants in the preparation of applications on smoke flavouring primary products. This guidance describes the scientific data to be included in the applications for the authorisation of new smoke flavouring primary products, as well as for the renewal or for the modification of existing authorisations, submitted respectively under Articles 7, 12 and 11 of Regulation (EC) No 2065/2003. Information to be provided in all applications relates to: the characterisation of the primary product, including the description of the source materials, manufacturing process, chemical composition, specifications and stability; the proposed uses and use levels and the assessment of the dietary exposure; the safety data, including information on the genotoxic potential of the identified components and of the unidentified fraction of the primary product, toxicological data other than genotoxicity and information on the safety for the environment. For the toxicological studies a tiered approach is applied, for which the testing requirements, key issues and triggers are described. A description of the standard uncertainties relevant for the evaluation of primary products and how these are considered in the standardised risk assessment procedure is also included. The applicant should generate the data requested in each section to support the safety assessment of the smoke flavouring primary product. On the basis of the submitted data, EFSA will assess the safety of the primary product and conclude whether or not it presents risks to human health and to the environment under the proposed conditions of use.

Scientific Opinion on Flavouring Group Evaluation 67, Revision 3 (FGE.67Rev3): consideration of 23 furan‐substituted compounds evaluated by JECFA at the 55th, 65th, 69th and 86th meetings

Abstract: The Panel on Food Additives and Flavourings (FAF) was requested to consider the JECFA evaluations of 25 flavouring substances assigned to the Flavouring Group Evaluation 67 (FGE67Rev3), using the Procedure as outlined in the Commission Regulation (EC) No 1565/2000 Eleven substances have already been considered in FGE67 and its revisions (FGE67Rev1 and FGE67Rev2) During the current assessment, two substances were no longer supported by industry, therefore 12 candidate substances are evaluated in FGE67Rev3 New genotoxicity and toxicity data are available for 2-pentylfuran [FL-no: 13059] and 2-acetylfuran [FL-no: 13054], which are representative substances of subgroup IV [FL-no: 13069, 13106, 13148] and VI-B [FL-no: 13045, 13070, 13083, 13101, 13105, 13138, 13163], respectively Based on these data, the Panel concluded that the concern for genotoxicity is ruled out for both [FL-no: 13054] and [FL-no: 13059] and consequently for the substances that they represent Since the candidate substances cannot be anticipated to be metabolised to innocuous products only, they were evaluated along the B-side of the Procedure The Panel derived a NOAEL of 226 mg/kg bw per day and a BMDL of 851 mg/kg bw per day, for 2-acetylfuran and 2-pentylfuran, respectively For all 12 substances sufficient margins of safety were calculated when based on the MSDI approach Adequate specifications for the materials of commerce are available for all 23 flavouring substances The Panel agrees with JECFA conclusions, for all 23 substances, 'No safety concern at estimated levels of intake as flavouring substances' based on the MSDI approach For 18 substances [FL-no: 13021, 13022, 13023, 13024, 13031, 13045, 13047, 13054, 13059, 13074, 13083, 13101, 13105, 13106, 13138, 13148, 13163 and 13190], the mTAMDI intake estimates are above the threshold of toxicological concern (TTC) for their structural classes and more reliable data on uses and use levels are required to finalise their evaluation

Four selected commercial seaweeds: biologically active compounds, antioxidant and cytotoxic properties

Abstract: The aim of this research work was to study the chemical characterisation, antioxidant and cytotoxic activity of ethanolic extracts of four commercial algae species Arame, Kombu, Hijiki and Wakame. ...

Safety evaluation of crosslinked polyacrylic acid polymers (carbomer) as a new food additive.

Abstract: The EFSA Panel on Food Additives and Flavourings (FAF) provides a scientific opinion on the safety of crosslinked polyacrylic acid polymers (carbomer) proposed for use as food additive in solid and liquid food supplements. Carbomer is formed from the monomer, acrylic acid, which is polymerised and crosslinked with allyl pentaerythritol (APE). The polymers are synthesised in ethyl acetate using ■■■■■ as free-radical polymerisation initiator. In vivo data showed no evidence for systemic availability or biotransformation of carbomer. Carbomer does not raise a concern regarding genotoxicity. Considering the available data set, the Panel derived an acceptable daily intake (ADI) of 190 mg/kg body weight (bw) per day based on a no observed adverse effect level (NOAEL) of 1,500 mg/kg bw per day from a sub-chronic 13-week study in rat, applying a compound specific uncertainty factor (UF) of 8. At the proposed maximum use levels, the exposure estimates ranged at the mean from 1.1 to 90.2 mg/kg bw per day and at the p95 from 12.5 to 237.4 mg/kg bw per day. At the proposed typical use level, the exposure estimates ranged at the mean from 0.7 to 60.2 mg/kg bw per day and at the p95 from 10.3 to 159.5 mg/kg bw per day. The Panel noted that the maximum proposed use levels would result in exposure estimates close to or above the ADI. The Panel also noted that level of exposure to carbomer from its proposed use is likely to be an overestimation. Taking a conservative approach, the Panel considered that exposure to carbomer would not give rise to a safety concern if the proposed maximum use level for solid food supplements is lowered to the typical use level reported by the applicant.

Safety evaluation of steviol glycoside preparations, including rebaudioside AM, obtained by enzymatic bioconversion of highly purified stevioside and/or rebaudioside A stevia leaf extracts.

Abstract: The EFSA Panel on Food Additives and Flavourings (FAF) provides a scientific opinion on the safety of steviol glycoside preparations, including rebaudioside AM, obtained by enzymatic bioconversion of highly purified stevioside and/or rebaudioside A stevia leaf extracts. These steviol glycoside preparations are produced via enzymatic bioconversion of highly purified stevioside and/or rebaudioside A extracts obtained from stevia plant using two UDP-glucosyltransferases and one sucrose synthase enzymes produced by the genetically modified strains of E. coli K-12 that facilitate the transfer of glucose to purified stevia leaf extracts via glycosidic bonds. The Panel considered that the parental strain is a derivative of E. coli K-12 which is well characterised and its safety has been documented; therefore, it is considered to be safe for production purposes. The Panel concluded that there is no safety concern for steviol glycoside preparations, including rebaudioside AM, obtained by enzymatic bioconversion of highly purified stevioside and/or rebaudioside A stevia leaf extracts using UDP-glucosyltransferases and sucrose synthase enzymes produced by the genetically modified strains of E. coli K-12, to be used as a food additive. The Panel recommends the European Commission to consider the proposal of establishing separate specifications for steviol glycoside preparations, including rebaudioside AM, obtained by enzymatic bioconversion of highly purified stevioside and/or rebaudioside A stevia leaf extracts in Commission Regulation (EU) No 231/2012.

Scientific opinion on flavouring group evaluation 414 (FGE.414): 2-hydroxy-4-methoxybenzaldehyde

Abstract: The EFSA Panel on Food Additives and Flavourings (FAF) was requested to evaluate the safety of the substance 2-hydroxy-4-methoxybenzaldehyde [FL-no: 05.229] as a new flavouring substance, in accordance with Regulation (EC) No 1331/2008. 2-Hydroxy-4-methoxybenzaldehyde belongs to chemical group 23 (Commission Regulation (EC) No 1565/2000) and is structurally related to the hydroxy- and alkoxy-ring substituted benzyl derivatives evaluated in FGE.52 and in FGE.20Rev4. The Panel considered the structural/metabolic similarity sufficient to evaluate the candidate substance following a group-based approach according to the EFSA Guidance on the data required for the risk assessment of flavourings to be used in or on foods. The information provided on the manufacturing process, the composition and the stability of [FL-no: 05.229] was considered sufficient. From studies carried out with this substance, the Panel concluded that there is no concern with respect to genotoxicity. Based on QSAR evaluation of possible metabolism, and based on information from structurally related substances, various metabolic routes can be anticipated, which only result in the formation of innocuous metabolites. The exposure estimates for [FL-no: 05.229] (24 and 60 μg/person per day for children and adults, respectively) were below the Threshold of Toxicological Concern (TTC) for its structural class (I). Accordingly, toxicity studies are not required and the Panel concluded at step A3 of the Procedure that 2-hydroxy-4-methoxybenzaldehyde is not of safety concern when used as a flavouring substance at the intended uses and use levels. Cumulative exposure estimates for 2-hydroxy-4-methoxybenzaldehyde and three structurally related substances (2.4 and 6.2 mg/kg body weight (bw) per day for adults and children, respectively) are above the TTC for structural class I, but below the ADI (acceptable daily intake) of 0-10 mg/kg bw per day for vanillin, which is one of these structurally related substances. Therefore, the cumulative exposure to these four substances [FL-no: 05.015, 05.018, 05.229 and 09.749] also does not raise a safety concern.

Opinion on the re-evaluation of mono- and diglycerides of fatty acids (E 471) as food additive in foods for infants below 16 weeks of age and follow-up of their re-evaluation as food additives for uses in foods for all population groups.

Abstract: Mono- and diglycerides of fatty acids (E 471) was re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS). As a follow-up to this assessment, the Panel on Food Additives and Flavouring was requested to assess mono- and diglycerides of fatty acids (E 471) for its use as food additive in food for infants below 16 weeks of age belonging to food categories 13.1.1 (Infant formulae) and 13.1.5.1 (Dietary foods for infants for special medical purposes and special formulae for infants). In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the food additive in 2017 when used in food for the general population. The Panel considered that there is no indication of adverse effects from the available animal studies at the highest dose tested and from the post marketing data. A comparison was made between the daily exposure to the sum of mono- and di-acylglycerols from breast milk and that resulting from the use of E 471 in the infant formula. The Panel noted that the resulting exposures are in the same order of magnitude. Overall, the Panel concluded that there is no reason for a safety concern when E 471 used as food additive in FC 13.1.1 and 13.1.5.1 and according to the Annex III to Regulation (EC) No 1333/2008. The risk assessment for toxic elements and impurities clearly indicated the need to lower the current maximum limits for arsenic, lead, cadmium and mercury and to include limits for glycidyl esters, 3-monochloropropane diol and erucic acid in the EU specifications of E 471.

Safety evaluation of long-chain glycolipids from Dacryopinax spathularia.

Abstract: The EFSA Panel on Food Additives and Flavourings (FAF) provides a scientific opinion on the safety of long-chain glycolipids from Dacryopinax spathularia (also called AM-1) as a food additive. AM-1 is a purified mixture of long-chain glycolipid congeners obtained by fermentation of the edible non-genetically modified fungus Dacryopinax spathularia. AM-1 glycolipids have very low oral bioavailability and overall available toxicology data do not demonstrate any adverse effects of the proposed food additive. Considering the available data set the Panel established an ADI of 10 mg/kg bw per day based on a range of NOAELs between 1,000 and 1,423 mg/kg bw per day (the highest doses tested), from the reproductive and a prenatal developmental toxicity studies in rats and 90-day studies in rat and dog. At the proposed maximum use levels, the exposure estimates ranged at the mean from 0.01 to 1.07 mg/kg bw per day and at the p95 from 0 to 3.1 mg/kg mg/kg bw per day. At the proposed typical use levels, the exposure estimates ranged at the mean from < 0.01 mg/kg bw per day to 0.23 mg/kg bw per day and at the p95 from 0 to 0.64 mg/kg bw per day. The Panel noted that the highest estimate of exposure of 3.1 mg/kg bw per day (in toddlers) is within the established ADI of 10 mg/kg bw per day and concluded that the exposure to long-chain glycolipids from Dacryopinax spathularia does not raise a safety concern at the uses and use levels proposed by the applicant.

Opinion on the re-evaluation of pectin (E 440i) and amidated pectin (E 440ii) as food additives in foods for infants below 16 weeks of age and follow-up of their re-evaluation as food additives for uses in foods for all population groups.

Abstract: Pectin (E 440i) and amidated pectin (E 440ii) were re-evaluated in 2017 by the former EFSA Panel on Food Additives and Nutrient sources added to Food (ANS) As a follow-up to this assessment, the Panel on Food Additives and Flavourings (FAF) was requested to assess the safety of pectins (E 440i,ii) for their uses as food additives in food for infants below 16 weeks of age In addition, the FAF Panel was requested to address the issues already identified during the re-evaluation of the same food additive The process involved the publication of a call for data to allow the interested business operators to provide the requested information to complete the risk assessment Based on the information submitted in response to the call for data, the FAF Panel considered it feasible to amend the current specifications, in particular for the toxic elements arsenic, lead, cadmium, mercury and for sulfur dioxide and to introduce new specifications for aluminium and microbiological criteria Studies on neonatal piglets, clinical studies and post-marketing data were made available during the call for data Due to the low internal validity of the clinical studies, the Panel concluded that a reference point could not be derived from them, but the results of the adequate piglet study could serve to derive a reference point When calculating the margin of safety for pectins exposure, this was below 1 for some scenarios At the maximum permitted levels (MPLs), an internal methanol dose would be produced that could lead to adverse health effects in infants below 16 weeks of age The FAF Panel recommended a reduction of the MPL of pectin (E 440i) and amidated pectin (E 440ii) in food categories 13151 and 13152, in order to reduce the exposure to both the additives themselves and to methanol