Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications

Titanium and titanium alloys are widely used in biomedical devices and components, especially as hard tissue replacements as well as in cardiac and cardiovascular applications, because of their desirable properties, such as relatively low modulus, good fatigue strength, formability, machinability, corrosion resistance, and biocompatibility. However, titanium and its alloys cannot meet all of the clinical requirements. Therefore, in order to improve the biological, chemical, and mechanical properties, surface modification is often performed. This article reviews the various surface modification technologies pertaining to titanium and titanium alloys including mechanical treatment, thermal spraying, sol–gel, chemical and electrochemical treatment, and ion implantation from the perspective of biomedical engineering. Recent work has shown that the wear resistance, corrosion resistance, and biological properties of titanium and titanium alloys can be improved selectively using the appropriate surface treatment techniques while the desirable bulk attributes of the materials are retained. The proper surface treatment expands the use of titanium and titanium alloys in the biomedical fields. Some of the recent applications are also discussed in this paper.

/pdf/surface-modification-of-titanium-titanium-alloys-and-related-176rvxu9wp.pdf

Surface modification of titanium, titanium alloys, and related materials for biomedical applications

TiO 2 photocatalysis is widely used in a variety of applications and products in the environmental and energy fields, including self-cleaning surfaces, air and water purification systems, sterilization, hydrogen evolution, and photoelectrochemical conversion. The development of new materials, however, is strongly required to provide enhanced performances with respect to the photocatalytic properties and to find new uses for TiO 2 photocatalysis. In this review, recent developments in the area of TiO 2 photocatalysis research, in terms of new materials from a structural design perspective, have been summarized. The dimensionality associated with the structure of a TiO 2 material can affect its properties and functions, including its photocatalytic performance, and also more specifically its surface area, adsorption, reflectance, adhesion, and carrier transportation properties. We provide a brief introduction to the current situation in TiO 2 photocatalysis, and describe structurally controlled TiO 2 photocatalysts which can be classified into zero-, one-, two-, and three-dimensional structures. Furthermore, novel applications of TiO 2 surfaces for the fabrication of wettability patterns and for printing are discussed.

TiO2 photocatalysis: Design and applications

Surface treatments of titanium dental implants for rapid osseointegration

Degeneration and regeneration of the nervous system

According to the 'Adhesion-Decalcification' concept, specific functional monomers within dental adhesives can ionically interact with hydroxyapatite (HAp). Such ionic bonding has been demonstrated for 10-methacryloyloxydecyl dihydrogen phosphate (MDP) to manifest in the form of self-assembled 'nano-layering'. However, it remained to be explored if such nano-layering also occurs on tooth tissue when commercial MDP-containing adhesives (Clearfil SE Bond, Kuraray; Scotchbond Universal, 3M ESPE) were applied following common clinical application protocols. We therefore characterized adhesive-dentin interfaces chemically, using x-ray diffraction (XRD) and energy-dispersive x-ray spectroscopy (EDS), and ultrastructurally, using (scanning) transmission electron microscopy (TEM/STEM). Both adhesives revealed nano-layering at the adhesive interface, not only within the hybrid layer but also, particularly for Clearfil SE Bond (Kuraray), extending into the adhesive layer. Since such self-assembled nano-layering of two 10-MDP molecules, joined by stable MDP-Ca salt formation, must make the adhesive interface more resistant to biodegradation, it may well explain the documented favorable clinical longevity of bonds produced by 10-MDP-based adhesives.

Self-assembled Nano-layering at the Adhesive Interface

Among functional monomers used in contemporary dental adhesives, 10-methacryloyloxydecyl dihydrogen phosphate (MDP) has been found to interact chemically with hydroxyapatite (HAp) most intensively and stably. This effect was thought to be the basis of the superior bonding effectiveness of MDP-based self-etch adhesives to enamel/dentin. To elucidate fully the chemical interaction and reactivity of MDP with HAp, we used (31)P CP-MAS NMR spectroscopy and powder x-ray diffraction. In an aqueous ethanol solution, Ca ions were leached from HAp to form, at short term, a MDP-calcium salt (CaMHP(2)) layered structure on the HAp surface. When MDP was allowed to interact for longer time (< 24 hrs), CaHPO(4).2H(2)O precipitated on top of this MDP-calcium salt layered structure. In conclusion, the intense chemical interaction of MDP with HAp must be ascribed to superficial dissolution of HAp induced by the MDP adsorption and subsequent deposition of MDP-calcium salt with a solubility lower than that of CaHPO(4).2H(2)O.

Chemical interaction of phosphoric acid ester with hydroxyapatite

Bioactive titania-gel layers formed by chemical treatment of Ti substrate with a H2O2/HCl solution.

Commercially available pure metallic titanium was chemically treated at 60 degrees C for 24 h with H2O2 solutions containing various metal chlorides to provide titanium with bioactivity, that is, to give it the ability to form a biologically active bone-like apatite layer on the surface. After the chemical treatment the titanium specimens were soaked in a simulated body fluid (the Kokubo solution). Apatite was found to deposit on the specimens treated with the H2O2/TaCl5 and H2O2/SnCl2 solutions. X-ray photoelectron spectroscopic (XPS) study of the specimens treated with those H2O2 solutions indicated that basic Ti-OH groups in titania hydrogel layers on their surfaces were responsible for apatite nucleation and growth.

Satoshi Hayakawa

Papers

Self-assembled Nano-layering at the Adhesive Interface

Chemical interaction of phosphoric acid ester with hydroxyapatite

Bioactive titania-gel layers formed by chemical treatment of Ti substrate with a H2O2/HCl solution.

Bioactivity of titanium treated with hydrogen peroxide solutions containing metal chlorides

Novel approach to fabricate porous gelatin-siloxane hybrids for bone tissue engineering.