The manipulation of fluids in channels with dimensions of tens of micrometres--microfluidics--has emerged as a distinct new field. Microfluidics has the potential to influence subject areas from chemical synthesis and biological analysis to optics and information technology. But the field is still at an early stage of development. Even as the basic science and technological demonstrations develop, other problems must be addressed: choosing and focusing on initial applications, and developing strategies to complete the cycle of development, including commercialization. The solutions to these problems will require imagination and ingenuity.

The origins and the future of microfluidics

Microfabricated integrated circuits revolutionized computation by vastly reducing the space, labor, and time required for calculations. Microfluidic systems hold similar promise for the large-scale automation of chemistry and biology, suggesting the possibility of numerous experiments performed rapidly and in parallel, while consuming little reagent. While it is too early to tell whether such a vision will be realized, significant progress has been achieved, and various applications of significant scientific and practical interest have been developed. Here a review of the physics of small volumes (nanoliters) of fluids is presented, as parametrized by a series of dimensionless numbers expressing the relative importance of various physical phenomena. Specifically, this review explores the Reynolds number Re, addressing inertial effects; the Peclet number Pe, which concerns convective and diffusive transport; the capillary number Ca expressing the importance of interfacial tension; the Deborah, Weissenberg, and elasticity numbers De, Wi, and El, describing elastic effects due to deformable microstructural elements like polymers; the Grashof and Rayleigh numbers Gr and Ra, describing density-driven flows; and the Knudsen number, describing the importance of noncontinuum molecular effects. Furthermore, the long-range nature of viscous flows and the small device dimensions inherent in microfluidics mean that the influence of boundaries is typically significant. A variety of strategies have been developed to manipulate fluids by exploiting boundary effects; among these are electrokinetic effects, acoustic streaming, and fluid-structure interactions. The goal is to describe the physics behind the rich variety of fluid phenomena occurring on the nanoliter scale using simple scaling arguments, with the hopes of developing an intuitive sense for this occasionally counterintuitive world.

/pdf/microfluidics-fluid-physics-at-the-nanoliter-scale-4bpahtd8qa.pdf

Microfluidics: Fluid physics at the nanoliter scale

Microfluidic devices for manipulating fluids are widespread and finding uses in many scientific and industrial contexts. Their design often requires unusual geometries and the interplay of multiple physical effects such as pressure gradients, electrokinetics, and capillarity. These circumstances lead to interesting variants of well-studied fluid dynamical problems and some new fluid responses. We provide an overview of flows in microdevices with focus on electrokinetics, mixing and dispersion, and multiphase flows. We highlight topics important for the description of the fluid dynamics: driving forces, geometry, and the chemical characteristics of surfaces.

Engineering flows in small devices

基礎講座 電気泳動(Electrophoresis)

Microfluidics, a technology characterized by the engineered manipulation of fluids at the submillimetre scale, has shown considerable promise for improving diagnostics and biology research. Certain properties of microfluidic technologies, such as rapid sample processing and the precise control of fluids in an assay, have made them attractive candidates to replace traditional experimental approaches. Here we analyse the progress made by lab-on-a-chip microtechnologies in recent years, and discuss the clinical and research areas in which they have made the greatest impact. We also suggest directions that biologists, engineers and clinicians can take to help this technology live up to its potential.

/pdf/the-present-and-future-role-of-microfluidics-in-biomedical-21k1pnojxw.pdf

The present and future role of microfluidics in biomedical research

A flow-focusing geometry is integrated into a microfluidic device and used to study drop formation in liquid–liquid systems. A phase diagram illustrating the drop size as a function of flow rates and flow rate ratios of the two liquids includes one regime where drop size is comparable to orifice width and a second regime where drop size is dictated by the diameter of a thin “focused” thread, so drops much smaller than the orifice are formed. Both monodisperse and polydisperse emulsions can be produced.

/pdf/formation-of-dispersions-using-flow-focusing-in-2zw2hx9w2y.pdf

Formation of dispersions using “flow focusing” in microchannels

Microfluidic technology offers capabilities for the precise handling of small fluid volumes dispersed as droplets. To fully exploit this potential requires simultaneous generation of multiple size droplets. We demonstrate two methods for passively breaking larger drops into precisely controlled daughter drops using pressure-driven flow in simple microfluidic configurations: (i) a T junction and (ii) flow past isolated obstacles. We quantify conditions for breakup at a T junction and illustrate sequential breakup at T junctions for making small drops at high dispersed phase volume fractions.

/pdf/geometrically-mediated-breakup-of-drops-in-microfluidic-2lq8xwzftn.pdf

Geometrically Mediated Breakup of Drops in Microfluidic Devices

Geometrically mediated breakup of drops in microfluidic devices

Microfluidic technologies have emerged recently as a promising new route for the fabrication of uniform emulsions. In this paper, we review microfluidic methods for synthesizing uniform streams of droplets and bubbles, focusing on those that utilize pressure-driven flows. Three categories of microfluidic geometries are discussed, including co-flowing streams, cross-flowing streams, and flow focusing devices. In each category we summarize observations that have been reported to date in experiments and numerical simulations. We describe these results in the context of physical mechanisms for droplet breakup, and simple theoretical models that have been proposed. Applications of droplets in microfluidic devices are briefly reviewed.

https://iopscience.iop.org/article/10.1088/0022-3727/40/19/R01/pdf

Microfluidic methods for generating continuous droplet streams

We study the elasto-capillary self-thinning and ultimate breakup of three polystyrene-based ideal elastic fluids by measuring the evolution in the filament diameter as slender viscoelastic threads neck and eventually break. We examine the dependence of the transient diameter profile and the time to breakup on the molecular weight, and compare the observations with simple theories for breakup of slender viscoelastic filaments. The evolution of the transient diameter profile predicted by a multimode FENE-P model quantitatively matches the data provided the initial stresses in the filament are taken into account. Finally, we show how the transient uniaxial extensional viscosity of a dilute polymer solution can be estimated from the evolution in the diameter of the necking filament. The resulting “apparent extensional viscosity” profiles are compared with similar results obtained from a filament stretching rheometer. Both transient profiles approach the same value for the steady state extensional viscosity, which increases with molecular weight in agreement with the Rouse–Zimm theory. The apparent discrepancy in the growth rate of the two transient curves can be quantitatively explained by examining the effective stretch rate in each configuration. Filament thinning studies and filament stretching experiments thus form complementary experiments that lead to consistent measures of the transient extensional viscosity of a given test fluid.

/pdf/elasto-capillary-thinning-and-breakup-of-model-elastic-41qpl31rju.pdf

Shelley L. Anna

Papers

Formation of dispersions using “flow focusing” in microchannels

Geometrically Mediated Breakup of Drops in Microfluidic Devices

Geometrically mediated breakup of drops in microfluidic devices

Microfluidic methods for generating continuous droplet streams

Elasto-capillary thinning and breakup of model elastic liquids