Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

/pdf/dye-sensitized-solar-cells-50b0w2bhsr.pdf

Dye-Sensitized Solar Cells

The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

Conjugated polymer-based organic solar cells

Converting solar energy into electricity provides a much-needed solution to the energy crisis the world is facing today. Polymer solar cells have shown potential to harness solar energy in a cost-effective way. Significant efforts are underway to improve their efficiency to the level of practical applications. Here, we report highly efficient polymer solar cells based on a bulk heterojunction of polymer poly(3-hexylthiophene) and methanofullerene. Controlling the active layer growth rate results in an increased hole mobility and balanced charge transport. Together with increased absorption in the active layer, this results in much-improved device performance, particularly in external quantum efficiency. The power-conversion efficiency of 4.4% achieved here is the highest published so far for polymer-based solar cells. The solution process involved ensures that the fabrication cost remains low and the processing is simple. The high efficiency achieved in this work brings these devices one step closer to commercialization.

https://yylab.seas.ucla.edu/papers/yy-pv-7-slow growth-nm-05.pdf

High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends

Organic electronics are beginning to make significant inroads into the commercial world, and if the field continues to progress at its current, rapid pace, electronics based on organic thin-film materials will soon become a mainstay of our technological existence. Already products based on active thin-film organic devices are in the market place, most notably the displays of several mobile electronic appliances. Yet the future holds even greater promise for this technology, with an entirely new generation of ultralow-cost, lightweight and even flexible electronic devices in the offing, which will perform functions traditionally accomplished using much more expensive components based on conventional semiconductor materials such as silicon.

The path to ubiquitous and low-cost organic electronic appliances on plastic

We demonstrate that semiconductor nanorods can be used to fabricate readily processed and efficient hybrid solar cells together with polymers. By controlling nanorod length, we can change the distance on which electrons are transported directly through the thin film device. Tuning the band gap by altering the nanorod radius enabled us to optimize the overlap between the absorption spectrum of the cell and the solar emission spectrum. A photovoltaic device consisting of 7-nanometer by 60-nanometer CdSe nanorods and the conjugated polymer poly-3(hexylthiophene) was assembled from solution with an external quantum efficiency of over 54% and a monochromatic power conversion efficiency of 6.9% under 0.1 milliwatt per square centimeter illumination at 515 nanometers. Under Air Mass (A.M.) 1.5 Global solar conditions, we obtained a power conversion efficiency of 1.7%.

http://science.sciencemag.org/content/sci/295/5564/2425.full.pdf

Hybrid Nanorod-Polymer Solar Cells

In the last decade, Si based photonics has made major advances in terms of design, fabrication, and device implementation. But due to Silicon’s indirect bandgap, it still remains a challenge to create efficient Si-based light emitting devices. In order to overcome this problem, an approach is to develop hybrid systems integrating light-emitting materials into Si. A promising class of materials for this purpose is the class of semiconducting nanocrystal quantum dots (NCs) that are synthesized by colloidal chemistry. As their absorption and emission wavelength depends on the dot size, which can easily be controlled during synthesis, they are extremely attractive as building blocks for nanophotonic applications. For applications in telecom wavelength, Lead chalcogenide colloidal NCs are optimum materials due to their unique optical, electronic and nonlinear properties. In this work, we experimentally demonstrate the integration of PbS nanocrystals into Si-based photonic structures like slot waveguides and ring resonators as optically pumped emitters for room temperature applications. In order to create such hybrid structures, the NCs were dissolved into polymer resists and drop cast on top of the device. Upon optical pumping, intense photoluminescence emission from the resonating modes is recorded at the output of the waveguide with transmission quality factors up to 14000. The polymer host material was investigated with respect to its ability to stabilize the NC’s photoluminescence emission against degradation under ambient conditions. The waveguide–ring coupling efficiency was also investigated as function of the NCs concentrations blended into the polymer matrix. The integration of colloidal quantum dots into Silicon photonic structures as demonstrated in this work is a very versatile technique and thus opens a large range of applications utilizing the linear and nonlinear optical properties of PbS NCs at telecom wavelengths.

Colloidal PbS nanocrystals integrated to Si-based photonics for applications at telecom wavelengths

Organic and inorganic semiconductors are diverse in many of their physical properties but the combination of these can feature unexpected as well as unique physical properties. Here we report on an organic/inorganic hetero-junction which can readily be utilized for sensing infrared light. The used materials are highly boron doped crystalline silicon (100) and a soluble buckminster fullerene derivative. Despite the missing light absorption of silicon as well as the of the fullerene derivative for a wavelengths beyond 1.3 μm and 720 nm respectively, a hetero-junction of these materials absorbs in the infrared and generates a primary photo-current in the wavelength range from 1.3 to 3 μm. The simple preparation of the hetero-junction by a solution process of the fullerene derivative on top of the silicon wafer substrate, is technologically attractive in an economically viable way.

Sensing infrared light with an organic/inorganic hetero-junction

Fabrication of Large Area Photovoltaic Devices Containing various blends of Polymer & Fullerene Derviatives by Using the Doctor Blade Technique. Optoelectron Rev 8(4):280

Realizing multiply resonant photonic crystal cavities with large free spectral range is key to achieve integrated devices with highly efficient nonlinear response, such as frequency conversion, four-wave mixing, and parametric oscillation. This task is typically difficult owing to the cavity modes' sensitivity to fabrication disorder, which makes it hard to reliably achieve a comb-like spectrum of equally spaced modes even when a perfect matching is theoretically predicted. Here we show that a comb-like spectrum of up to 8 modes with very high quality factor and diffraction limited volumes can be engineered in the bichromatic-type potential of a two-dimensional photonic crystal cavity fabricated in a thin silicon membrane. To cope with the tight tolerance in terms of frequency spacings and resonance linewidths, we develop a permanent post-processing technique that allows the selective tuning of individual confined modes, thus achieving an almost perfect frequency matching of high Q resonances with record finesse in silicon microresonators. Our experimental results are extremely promising in view of ultra-low power nonlinear photonics in silicon.

Thomas Fromherz

Papers

Colloidal PbS nanocrystals integrated to Si-based photonics for applications at telecom wavelengths

Sensing infrared light with an organic/inorganic hetero-junction

Fabrication of Large Area Photovoltaic Devices Containing various blends of Polymer & Fullerene Derviatives by Using the Doctor Blade Technique. Optoelectron Rev 8(4):280

Selective tuning of optical modes in a silicon comb-like photonic crystal cavity

Bandstructure and photoluminescence of SiGe islands with controlled Ge concentration