Engineered nanomaterials (ENMs) are now becoming a significant fraction of the material flows in the global economy. We are already reaping the benefits of improved energy efficiency, material use reduction, and better performance in many existing and new applications that have been enabled by these technological advances. As ENMs pervade the global economy, however, it becomes important to understand their environmental implications. As a first step, we combined ENM market information and material flow modeling to produce the first global assessment of the likely ENM emissions to the environment and landfills. The top ten most produced ENMs by mass were analyzed in a dozen major applications. Emissions during the manufacturing, use, and disposal stages were estimated, including intermediate steps through wastewater treatment plants and waste incineration plants. In 2010, silica, titania, alumina, and iron and zinc oxides dominate the ENM market in terms of mass flow through the global economy, used mostly in coatings/paints/pigments, electronics and optics, cosmetics, energy and environmental applications, and as catalysts. We estimate that 63–91 % of over 260,000–309,000 metric tons of global ENM production in 2010 ended up in landfills, with the balance released into soils (8–28 %), water bodies (0.4–7 %), and atmosphere (0.1–1.5 %). While there are considerable uncertainties in the estimates, the framework for estimating emissions can be easily improved as better data become available. The material flow estimates can be used to quantify emissions at the local level, as inputs for fate and transport models to estimate concentrations in different environmental compartments.

Global life cycle releases of engineered nanomaterials

Removal of hazardous organics from water using metal-organic frameworks (MOFs): plausible mechanisms for selective adsorptions.

The extensive development of electronic systems and telecommunications has lead to major concerns regarding electromagnetic pollution. Motivated by environmental questions and by a wide variety of applications, the quest for materials with high efficiency to mitigate electromagnetic interferences (EMI) pollution has become a mainstream field of research. This paper reviews the state-of-the-art research in the design and characterization of polymer/carbon based composites as EMI shielding materials. After a brief introduction, in Section 1, the electromagnetic theory will be briefly discussed in Section 2 setting the foundations of the strategies to be employed to design efficient EMI shielding materials. These materials will be classified in the next section by the type of carbon fillers, involving carbon black, carbon fiber, carbon nanotubes and graphene. The importance of the dispersion method into the polymer matrix (melt-blending, solution processing, etc.) on the final material properties will be discussed. The combination of carbon fillers with other constituents such as metallic nanoparticles or conductive polymers will be the topic of Section 4. The final section will address advanced complex architectures that are currently studied to improve the performances of EMI materials and, in some cases, to impart additional properties such as thermal management and mechanical resistance. In all these studies, we will discuss the efficiency of the composites/devices to absorb and/or reflect the EMI radiation.

Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials

One-dimensional TiO2 (1D TiO2) nanomaterials with unique structural and functional properties have been extensively used in various fields including photocatalytic degradation of pollutants, photocatalytic CO2 reduction into energy fuels, water splitting, solar cells, supercapacitors and lithium-ion batteries. In the past few decades, 1D TiO2 nanostructured materials with a well-controlled size and morphology have been designed and synthesized. Compared to 0D and 2D nanostructures, more attention has been paid to 1D TiO2 nanostructures due to their high aspect ratio, large specific surface area, and excellent electronic or ionic charge transport properties. In this review, we present the crystal structure of TiO2 and the latest development on the fabrication of 1D TiO2 nanostructured materials. Besides, we will look into some critical engineering strategies that give rise to the excellent properties of 1D TiO2 nanostructures such as improved enlargement of the surface area, light absorption and efficient separation of electrons/holes that benefit their potential applications. Moreover, their corresponding environmental and energy applications are described and discussed. With the fast development of the current economy and technology, more and more effort will be put into endowing TiO2-based materials with advanced functionalities and other promising applications.

A review of one-dimensional TiO2 nanostructured materials for environmental and energy applications

Carbon nanotube membranes for water purification: A bright future in water desalination

This article gives an overview of the application of nanomaterials in environmental remediation. In the area of environmental remediation, nanomaterials offer the potential for the efficient removal of pollutants and biological contaminants. Nanomaterials in various shapes/morphologies, such as nanoparticles, tubes, wires, fibres etc., function as adsorbents and catalysts and their composites with polymers are used for the detection and removal of gases (SO2, CO, NOx, etc.), contaminated chemicals (arsenic, iron, manganese, nitrate, heavy metals, etc.), organic pollutants (aliphatic and aromatic hydrocarbons) and biological substances, such as viruses, bacteria, parasites and antibiotics. Nanomaterials show a better performance in environmental remediation than other conventional techniques because of their high surface area (surface-to-volume ratio) and their associated high reactivity. Recent advances in the fabrication of novel nanoscale materials and processes for the treatment of drinking water and industrial waste water contaminated by toxic metal ions, radionuclides, organic and inorganic solutes, bacteria and viruses and the treatment of air are highlighted. In addition, recent advances in the application of polymer nanocomposite materials for the treatment of contaminants and the monitoring of pollutants are also discussed. Furthermore, the research trends and future prospects are briefly discussed.

A review on nanomaterials for environmental remediation

The review presented below summarizes the up-to-date research efforts in using one-dimensional TiO2 nanomaterials in dye-sensitized solar cells. A brief account of the methods of synthesis of the anisotropic nanomaterials as well as their photovoltaic performance in DSCs was summarily presented. The usefulness of the materials as scattering layer in DSCs was also surveyed.

Anisotropic TiO2 nanomaterials in dye-sensitized solar cells

We report the use of highly porous, dense, and anisotropic TiO2 derived from electrospun TiO2–SiO2 nanostructures through titanate route in dye-sensitized solar cells. The titanate-derived TiO2 of high surface areas exhibited superior photovoltaic parameters (efficiency > 7%) in comparison to the respective electrospun TiO2 nanomaterials and commercially available P-25.

TiO2 derived by titanate route from electrospun nanostructures for high-performance dye-sensitized solar cells

Electrospinning is a versatile method of preparing polymer nanocmposite fibers. Electrospun nanocomposite fibers of poly(methyl methacrylate) and single walled carbon nanotubes were prepared. The f...

https://journals.sagepub.com/doi/pdf/10.1177/155892500800300405

Preparation and Characterization of Electrospun Fibers of Poly(methyl methacrylate) - Single Walled Carbon Nanotube Nanocomposites

Composite nanofibers from poly(methylmethacrylate)- (PMMA-) conducting polyaniline [PANI(HCl)] were prepared by using the electrospinning technique. The morphology and structural details of the fibers were characterized by SEM and the ac conductivity of the composite fibers found was measured to be ∼ 2.17×10−4 S/cm which is very good enhancement compared to that of pure PMMA and conductivity of PANI-PMMA thin films as well. The conductivity is found to increase with increase in the polyaniline content in the composite. Microwave Hall mobility measurements on electrospun nanofibers showed 17 cm2/V s for the lower loadings. With further increase in the polyaniline content in the composite, the mobility value decreases which is attributed to the increase in carrier-carrier scatterings.

V. Jagadeesh Babu

Papers

A review on nanomaterials for environmental remediation

Anisotropic TiO2 nanomaterials in dye-sensitized solar cells

TiO2 derived by titanate route from electrospun nanostructures for high-performance dye-sensitized solar cells

Preparation and Characterization of Electrospun Fibers of Poly(methyl methacrylate) - Single Walled Carbon Nanotube Nanocomposites

Microwave Hall mobility and electrical properties of electrospun polymer nanofibers