Application of Taguchi Method in the Optimization of Injection Moulding Parameters for Manufacturing Products from Plastic Blend
About:
This article is published in International journal of engineering and technology.The article was published on 2010-01-01 and is currently open access. It has received 105 citations till now. The article focuses on the topics: Taguchi methods & Injection moulding.read more
Citations
More filters
Journal ArticleDOI
Parameter optimization in milling of glass fiber reinforced plastic (GFRP) using DOE-Taguchi method
TL;DR: Analysis of experimental results presents optimum values of these three parameters to achieve minimal surface roughness with speed as a major contributing factor.
Journal ArticleDOI
A Taguchi approach on optimal process control parameters for HDPE pipe extrusion process
TL;DR: In this article, the authors proposed an optimization of the withstanding pressure of high-density polyethylene (HDPE) pipes using Taguchi technique, where different control parameter combinations are analyzed by considering multiple setting levels of each control parameter.
Book ChapterDOI
Analysis and Optimization of Metal Injection Moulding Process
TL;DR: In this paper, the effect of influencing variables of nickel based (Cr3C2-NiCr + NiCrSiB) metal injection molded parts using statistical Taguchi method is employed to conduct actual experiments and Pareto analysis of variance is conducted to analyze and estimate the significant contribution of input variables on different outputs.
Journal ArticleDOI
A current state of art applied to injection moulding manufacturing process – A review
TL;DR: Throughout this review, the process parameters, response, material used and the technique applied to optimization research in the field of IM are highlighted.
Journal ArticleDOI
Sensitivity analysis and optimum design for the stator of synchronous reluctance machines using the coupled finite element and Taguchi methods
Hossein Azizi,Abolfazal Vahedi +1 more
TL;DR: The FEM simulation results confirm that the performance of the SynRM can be improved significantly in comparison with the initial design, using the proposed Taguchi method.
References
More filters
Journal ArticleDOI
Comparison of the warpage optimization in the plastic injection molding using ANOVA, neural network model and genetic algorithm
Babur Ozcelik,Tuncay Erzurumlu +1 more
TL;DR: In this paper, the effects of process parameters for thin shell plastic part were exploited using both design of experiment (DOE), Taguchi orthogonal array and finite element software MoldFlow (FE).
Journal ArticleDOI
The use of Taguchi method in the design of plastic injection mould for reducing warpage
TL;DR: In this article, the authors used the Taguchi method to test the warpage properties of a thin plate with dimension 120mm×50mm/1.5mm and showed that the most effective factor on the warpages is the melt temperature.
Journal ArticleDOI
Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method
Tuncay Erzurumlu,Babur Ozcelik +1 more
TL;DR: In this article, a series of mold analyses were performed to exploit the warpage and sink index data to solve the quality problem occurring the injection-molded thermoplastic parts.
Journal ArticleDOI
Tensile and impact behavior of polypropylene/low density polyethylene blends
TL;DR: In this article, the authors make polypropylene (PP) and low-density polyethylene (LDPE) blends via injection molding carried out under various injection temperatures and evaluate their tensile and impact properties.