scispace - formally typeset
Journal ArticleDOI

Conducting, magnetic polyaniline/Ba0.25Sr0.75 Fe11(Ni0.5Mn0.5)O19 nanocomposite: Fabrication, characterization and application

Reads0
Chats0
TLDR
In this paper, Ni/Mn doped Barium Strontium Ferrite nanoparticles (Ba 0.25 Sr 0.5 )O 19 ) were fabricated successfully through sol-gel method and in-situ polymerization technique, respectively.
About
This article is published in Journal of Alloys and Compounds.The article was published on 2015-10-15. It has received 45 citations till now. The article focuses on the topics: Ferrite (magnet) & Polyaniline.

read more

Citations
More filters
Journal ArticleDOI

Effect of formation of heterostructure of SrAl4Fe8O19/RGO/PVDF on the microwave absorption properties of the composite

TL;DR: In this article, a novel RAM through one port chemical reduction of graphene oxide (GO) in presence of magnetic inclusion of nano-strontium aluminium ferrite SrAl4Fe8O19 (SAF) to make ternary composite films in Poly (Vinylidene) Fluoride (PVDF) were prepared.
Journal ArticleDOI

Polyvinylidene fluoride/nanocrystalline iron composite materials for EMI shielding and absorption applications

TL;DR: In this article, the experimental results on electromagnetic interference (EMI) shielding and radar signal absorption characteristics of a polymer-metal composite (PMC) based on polyvinylidene fluoride (PVDF) dispersed with varying concentration of nanocrystalline iron (n-Fe).
Journal ArticleDOI

Design of lightweight broadband microwave absorbers in the X-band based on (polyaniline/MnNiZn ferrite) nanocomposites

TL;DR: In this paper, the authors presented a novel, lightweight, broadband microwave absorbers based on polyaniline/Mn 0.1 Ni 0.45 Zn0.45 Fe 2 O 4 (PANI/NiZn ferrite) nanocomposites.
Journal ArticleDOI

Substitution effect of Me = Al, Bi, Cr and Mn to the microwave properties of polyaniline/BaMeFe 11 O 19 for absorbing electromagnetic waves

TL;DR: In this paper, the effects of iron substitution in hexaferrite composites by trivalent ions Al3+, Bi3+, Cr3+ and Mn3+ on permittivity, permeability and microwave absorption properties are studied.
References
More filters
Journal ArticleDOI

Progress in preparation, processing and applications of polyaniline

TL;DR: A detailed discussion on the mechanism of electrical conduction in PANI and the factors those influence the conductivity of PANI is also included in this paper, where the problems of effective utilization and the methods adopted to overcome these problems are also provided.
Journal ArticleDOI

Intrinsically conducting polymers for electromagnetic interference shielding

TL;DR: In this paper, the authors summarized and reviewed the research on electromagnetic interference (EMI) shielding with intrinsically conducting polymers (ICPs), mainly polyaniline (PANI) and polypyrrole (PPY), and their composites in various frequency ranges.
Journal ArticleDOI

Complex permittivity, complex permeability and microwave absorption properties of ferrite–polymer composites

TL;DR: In this paper, the complex permittivity, complex permeability, and microwave absorption properties of polymer composites prepared with different ferrite ratios of 50, 60, 70% and 80% in polyurethane (PU) matrix have been investigated in X-band (8.2-12.4 GHz) frequency range.
Journal ArticleDOI

Influences of La3+ substitution on the structure and magnetic properties of M-type strontium ferrites

TL;DR: In this article, the effect of substitution of rare-earth La 3+ by hexagonal ferrites has been investigated by XRD, VSM and Mossbauer spectrum, and it has been shown that the substituted amount x at the maximum value of H cJ is bigger than that of σ s.
Journal ArticleDOI

Electromagnetic interference shielding efficiency of polyaniline mixtures and multilayer films

TL;DR: In this paper, a multilayer polyaniline (PAN) and conducting powders such as graphite, graphite and carbon black is measured in the frequency range from 10 MHz to 1 GHz by using ASTM D4935-89 technique.
Related Papers (5)