Journal ArticleDOI
Effect of RE addition on wear behavior of an Al-6061 based hybrid composite
TLDR
In this paper, the authors investigate the wear performance of hybrid composites with Al-6061 alloy-based hybrid composite with Al2O3, SiC and CeO2 as reinforcement.About:
This article is published in Wear.The article was published on 2019-04-30. It has received 26 citations till now. The article focuses on the topics: Delamination.read more
Citations
More filters
Journal ArticleDOI
A Review on AA 6061 Metal Matrix Composites Produced by Stir Casting.
TL;DR: In this paper, a review on AA 6061 aluminium alloy matrix composites produced through the stir-casting process is presented, focusing on conventional stircasting fabrication, process parameters, various reinforcements used, and the mechanical properties of the AA6061 composites.
Journal ArticleDOI
Studies on High Temperature Wear and Friction Behaviour of AA6061/B 4 C/hBN Hybrid Composites
TL;DR: In this paper, the use of hexagonal boron nitride (h-BN) as a solid lubricant for AA6061/B4C composite due to its special features of self-lubricating property, thermal and chemical stability was discussed.
Journal ArticleDOI
Effect of processing speed on wear and corrosion behavior of novel MoS2 and CeO2 reinforced hybrid aluminum matrix composites fabricated by friction stir processing
TL;DR: In this article, a mixture of MoS2 and CeO2 powder was reinforced in Al7075 alloy through friction stir processing with different processing speed and multi-pass approach.
Journal ArticleDOI
Parametric study of aluminium-rare earth based composites with improved hydrophobicity using response surface method
TL;DR: In this paper, the specific wear rate of Al-6061 alloy composite composites with traces amount of rare earth oxides (REOs) using pin-on-disc tribometer have been evaluated.
Journal ArticleDOI
Fabrication of TiC-graphene dual-reinforced self-lubricating Al matrix hybrid nanocomposites with superior mechanical and tribological properties
TL;DR: In this paper , the microstructures, compressive and tribological properties of the AMHNs with different fractions of graphene nanoplatelets (GNPs) were studied and compared with Al2024 alloy, and TiC or GNPs singly reinforced Al composites.
References
More filters
Journal ArticleDOI
Strengthening in carbon nanotube/aluminium (CNT/Al) composites
TL;DR: In this article, three major mechanisms involved in CNT/Al composites are analyzed along with experimental procedure for making CNT and Al composites, along with three major composites strengthening mechanisms.
Journal ArticleDOI
Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
Michael Oluwatosin Bodunrin,Michael Oluwatosin Bodunrin,Kenneth Kanayo Alaneme,Kenneth Kanayo Alaneme,Lesley H. Chown,Lesley H. Chown,Lesley H. Chown +6 more
TL;DR: A review of different combinations of reinforcing materials used in the processing of hybrid aluminium matrix composites and how it affects the mechanical, corrosion and wear performance of the materials is presented in this paper.
Journal ArticleDOI
Investigating effects of process parameters on microstructural and mechanical properties of Al5052/SiC metal matrix composite fabricated via friction stir processing
TL;DR: In this paper, the influence of tool rotational speed, traverse speed, number of FSP passes, shift of rotational direction between passes and particle size was studied on distribution of SiC particles in metal matrix, microstructure, microhardness and wear properties of specimens.
Journal ArticleDOI
Preparation and Luminescence Properties of Hybrid Materials Containing Europium(III) Complexes Covalently Bonded to a Silica Matrix
TL;DR: A new kind of luminescent organic-inorganic hybrid material (denoted Hybrid I) consisting of europium 1,10-phenanthroline complexes covalently attached to a silica-based network was prepared by a sol-gel process as discussed by the authors.
Journal ArticleDOI
Wear characteristics of surface-hybrid-MMCs layer fabricated on aluminum plate by friction stir processing
TL;DR: In this paper, a mixture of SiC and Al2O3 powders of different weight ratios was packed into a groove of 3mm width and 1.5mm depth cut on the aluminum plate, and covered with an aluminum sheet 2mm thick.
Related Papers (5)
Study of Dry Sliding Wear Behavior of Aluminium/SiC/Al 2 O 3 /Graphite Hybrid Metal Matrix Composite Using Taguchi Technique
Satpal Kundu,Ashok Kr Mishra +1 more
Analysis of Wear Resistance, Cracks and Hardness of Metal Matrix Composites with SiC Additives and Al2O3 as Reinforcement
S. Nallusamy,A. Karthikeyan +1 more